co ex used for sale

Chiller, cooling water circuit, heat exchanger, cooling for spot welding machine, refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, cooling machine, cooling unit, coolant pump -Refrigeration compressor: cooling unit Cooling 7 -Type: FK 7 -Cooling capacity: 1.6 kW -Volume flow rate: 5.2 l/min -Dimensions: 570/360/H260 mm -Weight: 22.7 kg

General SKU291Y518 LocationBarneveld MakeFryma TypeMS-12 No.M 11499 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.12 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions ø 140 x 80 mm Inletø 20 mm Outletø 20 mm With jacketcheck Max. temperature80 °C Motor± 3 kW With variable speed drivecheck Rotor speed1000 - 3000 rpm Without ballscheck With pumpcheck Motor± 0,12 kW (0—550 rpm) With variable speed drivecheck Materialstainless steel 1.4000 (aisi 429) With jacketcheck General Year of construction1998 With switch(as is) Floorspace1,6 x 0,55 m Total height0,74 m Weight190 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsNew arrivalsMinerals & inorganicSand millsFrymaInd ...

General SKU291Y540 LocationBarneveld MakeFryma TypeCobalt-Mill MS-12 No.M15426 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume0.5 Ltr. Motor3 KW Specified Features - Sand mill Vertical sandmillcheck Capacity0,5 l. Housing dimensions Dia. 140x90 mm Inletcheck Outletcheck With jacketcheck Motor3,0 kW, 380 V, 2880 rpm. With variable speed drivecheck Rotor speed1300-3000 rpm. With pumpcheck Motor0,12 kW, 380 v., 1370 rpm Materialstainless steel aisi aws316l 1.4430 With jacketcheck General Year of construction1992 With switchgearcheck Floorspace0,55x0,80 m Total height0,77 m Weight200 kg Extra SpecificationsTemperature meter glass broken.Paints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsNew arrivalsMinerals & inorganicSand millsFrymaIndu ...

Complete AMUT E100 Coextrusion Line + Inline ILLIG RDM 75K Thermoformer, AMUT line year: 2010, ILLIG RDM 75K year of manufacture: December 2007, Consisting of:, AMUT E100 Coextrusion Line, - AMUT 4-component mixing and dosing unit with integrated vacuum pump, - Main extruder AMUT EA100, - Screw diameter: 100 mm, - L/D ratio: 35, - 8 heating zones, - Heating capacity: 54.9 kW, - Air cooled, - Drive motor: 178 kW, - Degassing pump: 2.2 kW, 35 m³/h, - Automatic screen changer, - Melt pump, Coextruder AMUT EA60, - Screw diameter: 60 mm, - L/D ratio: 33, - 3 heating zones, - Heating capacity: 26.4 kW, - Air cooled, - Drive motor: 59.5 kW, - Automatic screen changer, - A-B-A black-box adapter, - AMUT flex-lip die, - Die width: 800 mm, - Thickness range: 0.15 to 1.8 mm, - Complete pumping group, Cooling Stack and Control Desk, - 3-roll polished chrome cooling stack, - Working width: 1,000 mm,  ...

Complete AMUT E100 Coextrusion Line + Inline ILLIG RDK 80 Thermoformer, AMUT line year: 2010, ILLIG RDK 80 year: December 2007, Consisting of:, AMUT E100 Coextrusion Line, - AMUT 4-component mixing and dosing unit with integrated vacuum pump, - Main extruder AMUT EA100, - Screw diameter: 100 mm, - L/D ratio: 35, - 8 heating zones, - Heating capacity: 54.9 kW, - Air cooled, - Drive motor: 178 kW, - Degassing pump: 2.2 kW, 35 m³/h, - Automatic screen changer, - Melt pump, Coextruder AMUT EA60, - Screw diameter: 60 mm, - L/D ratio: 33, - 3 heating zones, - Heating capacity: 26.4 kW, - Air cooled, - Drive motor: 59.5 kW, - Automatic screen changer, - A-B-A black-box adapter, - AMUT flex-lip die, - Die width: 800 mm, - Thickness range: 0.15 to 1.8 mm, - Complete pumping group, Cooling Stack and Control Desk, - 3-roll polished chrome cooling stack, - Working width: 1,000 mm, - Roll diameters: ...

max. workpiece length: 4500,6000 mm profile spindle: 4 Stück main drive: 30 kW Weinig Conturex C226 Machining Center ---------------------------------------------- For sale on behalf of a client, includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ---------------------------------------- Price of the above-mentioned machine available upon request! ---------------------------------------- Dismantling and reinstallation available upon request! (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 300x32x2,5 mm capacity 90 degrees: round: 10-90 mm capacity 90 degrees: flat: 80x10-80 mm capacity 90 degrees: square: 10-80 mm Cutting range at 90 degrees: round - solid materia: 10 - 40 mm Cutting range at 90 degrees: flat - solid material: 40x10-40 mm Cutting range at 90 degrees: square -solid materil: 10- 40 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg dimensions of the machine ca.: 2590x1910x1910 mm Accessories: -Footswitch with emergency stop -Micro spraying device -HM circular saw blade 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm : 110 mm : 95 mm : 135x60 mm : 120 mm : 100 mm : 135x60 mm : 180 mm dimensions of saw-blade: 350x32x3,4 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ATLAS COPCO ZR 55 VSD is a Schraubenkompressor, entwickelt für präzise Leistung, hohe Genauigkeit und Zuverlässigkeit. Leistungsdaten: Max. Arbeitsdruck 8,35 bar, Liefermenge 139 l/s. Technische Daten: Anschluss 400 V, installierte Leistung 55 kW; Gewicht ca. 1880 kg; Abmessungen L2400×B1020×H1870 mm. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air reservoir -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Horizon VAC-100a + PJ-77R Collator with jogger - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Horizon VAC-100a + PJ-77R Collator with jogger Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon VAC-100a + PJ-77R Collator with jogger Price: 8500 EUR Download PDF Horizon VAC-100a + PJ-77R Collator with jogger This machine is in very good condition, has low mileage, and is ready to work. Machine setup is controlled from the control panel. Made in Japan. Horizon VAC-60Ha Max size: 350x500mm Min size: 120x148mm Vacuum pick-up 10 shelves Stack height: 55mm Weigh ...

Complete Euro-Diesel S.A. industrial control rack with original electronic control and interface cards. Included in this complete rack: 1× REDBUS EUR-0801 Rev.B rack/backplane 4× Card DIO Ver. 3.04 1× CAN R1 communication card 2× CARTE PSU Ver. 2.3 power supply cards 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Complete Euro-Diesel S.A. industrial control rack with multiple original control, communication, power supply and interface cards. Included in this complete rack: 1× MBCPU R2 rack/backplane 4× ACIN V2.7 cards 2× CARTE PSU Ver. 2.3 power supply cards 1× MONA R1 with Analog Devices AD202JN isolation amplifier 1× INTM Card V3.4 1× CAN R1 communication card 1× RS485 R1 communication card 1× Card DIO Ver. 3.04 1× Original metal Euro-Diesel rack Manufacturer: Euro-Diesel S.A. Condition: Used Quantity available: 1 complete rack Location: Delft, Netherlands Removed from an industrial installation. The components have not been individually tested after removal. The rack is sold only as a complete unit. Individual cards are not sold separately. Please see the photographs for the exact configuration, connectors, serial numbers and condition.

Empty 316 container for sale with oil tank and room ventilation No rust

Screw compressor CompAir Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

For sale is a powerful CompAir Broomwade screw compressor unit (electric motor incl. compressor stage / screw block). Ideal as a spare part, replacement unit for existing industrial plants or for export/repairers. Technical data (according to nameplate): Power: 90 kW Speed: 1,465 rpm (50 Hz) Voltage / Current: 380/415 V | 191/178 A (star/delta circuit) Year of Make: 1996 Degree of protection / frame: IP 23 | Frame C250MC As shown in the pictures, stored on pallet. Incl. suction tube / flexible hoses and device for fastening.

General SKU291Y511 MakeCondux TypeCUM 100 No.5988 Year of construction1992 Main Features MaterialStainless steel Shell (Material)Stainless steel Specified Features - Fine Impact Mill Grindercheck Rotor sizeø 95 mm Grinding room sizeø 100 mm With sieve cagecheck Housing dimensions ø 100 mm With hoppercheck Inletø 30 mm Feeding with vibro feedercheck Motorcheck With variable speed drivecheck Speed3000/6000 rpm Fine Impact Mills MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space0,90 x 0,60 m Total height1,60 m Weight200 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalFine Impa ...

GAMMA MECCANICA GM 90-35D COMPAC HP (photos taken before reconditioning . see how we recondition [HERE](.germanplast/pages/photo-gallery)), automatic cycle from waste to granule, Material: hard and soft plastics PP, PE, PP/PE, PS, ABS - film reels, Optimal scrap size 40 mm. (ask for [size reduction equipment](.germanplast/listings?q=granulators) if you need), Nominal throughput rate 250-500 kg/h depending on the type of material and feeding rate, Loading belt with metal detector, Reel feding system, Compactor AF-T 105, 90 kW drive, Extruder 90 mm. 36 L/D - 90 kW drive, degassing vacuum pump, BDO 90/140 screen changer 144 mm. Ø screen [ fully automatic screenchanger available on separate request](.germanplast/listings/7610249-used-fimic-ras-325-automatic-sc reenchanger), GMC 50 hydraulic power unit, Cooling tank with TDA 4.0 granulator, C285 granulate centrifuge, Granulate drying tower,  ...

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

General SKU291Y489 MakeFryma TypeML 160 No.M10451 Year of construction1993 Mounted on framecheck Motor Motor power7.5 kiloWatt Main Features MaterialStainless steel Motor7.5 KW Inlet diameter160 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 200 x 50 mm With hoppercheck Inletø 160 mm Outlet155 x 85 mm Motor7,5 kW 380 V 2890 rpm Speed2890 rpm MaterialStainless steel 1.4301 (304) General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,60 m Total height2,50 m Weight250 kgColloid millsNew arrivalsFrymaMills > Colloid millsNew arrivalsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

T19 - used approx. 28 m³ / 28,000 L steel tanks, inside coated with Brantho-Korrux 3in1. Technical details: Content: approx. 28 m³ / 28,000 litres Material: Steel tank S235JRG2 with Brantho-Korrux interior paint Manufacturer: Verschoore Constructie Year of Make: 2008 Dimensions: approx. Ø 2.60 m × H Tank 5.50 m / H total 6.10 m Other: Used steel tank, professionally cleaned inside and in good condition. Upright, above-ground steel tanks, dome on the tank body and on top of the roof. Several inlets and outlets, see photos. Tank repainted from the inside in reddish brown with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint. Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the inner coating of food containers and food processing machines (tested by Lab. D ...

3000 x 1500mm Brush Tables Automatic loading / unloading Night Train Genius 4000 w fiber

Year of construction not apparent Cooling + up to +8°C plug-in, connected loads 230 V / incl. interior border and partition grille without lid External dimensions: 150 x 105 H 95cm Interior: 140 x 90 H 50cm not cleaned

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs

x-travel:14000 mm y-travel:3100 mm z-travel:1.200 mm (220 - 1.420) mm distance between columns:4.417 mm table-size:14.000 x 2.500 mm workpiece weight:15.000 kg/m drive capacity - spindle motor:25 kW spindle cone:63 HSK spindle turning speed range:18000 rpm milling feeds:30000 mm/min dimensions of the machine ca.:15.000 x 8.418 x 6.033 mm weight of the machine ca.:135 t CNC controller: SIEMENS 840 D universal milling head:5 Achsen mit ?C5C? Elektrospindel automatic tool changer:24 fach

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

We´re offereing successfully since many years twin-screw compounding extruders >> NEW segmented screws and cylinders, LD ratio due to your request Side-feeders, vacuum ports and accessories Please contact us for further information

Colour JET 2 Paint mist extraction Rated motor power: 0,75 / 2,1 kW Engine speed: 96 min 0/1,430 Air volume: 3,000 / 6,800 m ³/h Effective pressure: 400 / 500 PA Dimensions closed (W/H/D): 1,012 x 1.405 x 943 mm Folded dimensions (W/H/D): 1,897 x 1.405 x 1,166 mm Pre-and fine filter filter area: 1 m² Connection diameter: 300 mm Switch zweistuftig Compact construction, space-saving Powerful, high suction power,. low operating costs Easy maintenance, long filter life Universally applicable, variable accessories High flexibility Mobile design Suction technology with front plate system G & ALKO 19562801

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Drive : 12 KW

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.

with 12,000 m³/h air volume. Standard emptying in 3 containers of 200 litres each Reliable, quiet and easy to use. The FI series is suitable for the extraction of different staeube and spaene. Due to its efficient compact design, it is designed for use indoors and outdoors of workshops with minimal space requirements. The housing made of painted sheet steel, FILTER D 145 X H 1200 and the programmable, automatic compressed air cleaning system ensure an equal handling of the spades and bars. These are fed into handy, mobile metal housings with a viewing window for the fuel level indicator. Equipped with calming chamber for coarse particle separation at the entrance into the filter unit. The deduster is designed as a vacuum system for high suction performance and maximum fire and explosion protection with integrated Loesch water ring. The highly efficient, clean air-installed, sound-c ...

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent

with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Standard emptying in 3 containers of 200 litres each Installation dimensions 350 x 110 x h 245 cm Reliable, quiet and easy to use.

with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

Key data: 40 mm, 40 , 600 U/min

Material: PE, PP, PS, ABS, Year of construction: 2000 Capacity: approx. 100 – 300 kg/h Screw diameter: 2 x Ø 40.0 mm L/D: 40:1 Propulsion: 110 kW (DC) more details: synchronous, degassing with vacuum pump, screws and cylinders segmented, Strand nozzle, water bath, strand granulator. NEW control cabinet for heating and motor control (Siemens S7, touch screen) Optional: Side loading

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained

Cameo CO2 Epilog Laser Fusion 32 M2 with many accessories 75 Watt / Year: 03/2016 Laser engraving and cutting system - Working area 813 x 508 mm - 2" focus lens, - Drive: brushless DC servo motors for crystal-clear cutting edges in Plexiglas - Max. material thickness: 362 mm - Max. weight of the workpiece: 45 KG - Laser safety class: 2 - Interface: Ethernet, freely programmable IP address - Job control software - Red pilot laser - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, - Large format viewing window made of safety glass - Machine LED lighting - Laser beam expansion - Base frame on castors + Honeycomb cutting table for Fusion 32 + new bought 2021 Rolling device for cylindrical objects with roller system for Fusion 32/40 + bought new in 2021 and as good as  ...

Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Kanalventilator Absaugung - Duct Fan Coral PAP HP 7,5 (Absaugung - Extraction) Baujahr / Year 2003 HP 7,5 REVS 2800 HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

PVC PROFILE EXTRUSION LINE EVC BRAND, single screw extruder with 60 mm 28 LD, constructed in 1998, for 180 mm max width, 44 kw drive, control panel, Calibrating desk 3,7 m.long with 1 x 9 kw.pump, Caterpillar pull off unit, 180 mm wide, saw, 6,0 mt.long discharging table.

Substation for dust extraction "COLLAVINI" - used - Fan with 7.5 kw motor - 64 filter bags - Sleeve diameter 200 mm - Sleeve length 1700 mm - Estimated max filtering capacity 10,000 m3/h (current fan about 6000 m3/h) - Vibrating filter bag cleaning system - CE compliant N.B. the unloading, instead of bags or augers, has been adapted to feed a briquetting machine

Colmec 150mm Extruder Model: TGF 150/ 16D LD ratio 16:1 Screw length 2340mm Siemens Motor, 178kW, 1860rpm Hydraulically operated crosshead With Control cabinet With Temperature control unit Spare screw Year 2001

We have some Coperion CTE75, CTE65,CTE50 extrusion compounding lines,serious buyers contact us.