137,631 used machines on RESALE, but how to find them? Machine Search
Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace
turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.
The machine is in good technical condition; it can be tested by prior arrangement.
turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub ...
: neu : 2026 : 080248 : November 2026, Zwischenve : Türkei : 92932 € : 1756.41 € : 175 to : 3050 mm : Y1 / Y2 / X und R-Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 100 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 4250 mm : 1700 mm : 2850 mm : 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24", high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control&apos,s multitasking environment - Sensor bending &, correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CN ...
turning diameter: 3200 mm faceplate diameter: 2800 mm turning height: 1600 mm Control: Siemens 840 dsl workpiece weight: max. 16.000 kg Dimensions (L/W/H): 5.500 x 6.450 x 4.900 mm weight - pallet system: 43.000 kg Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed: 70 rpm Number of table speed ranges: Constant Vertical travel, Z-axis (ram stroke): 1,100 mm Horizontal travel, X-axis: 1,720 mm Working feed range: 2–2,000 mm/min Rapid traverse X/Z: 7 m/min Cross rail travel speed: 360 mm/min Main motor power: 55 kW Total installed power: 69 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 50 t
Manufacturer: AMADA Model No.: HFT 50-20 Year: 2006 Condition: Used Stock number: 9544 Compressive force: 50 t Maximum bending length: 2085 mm Maximum distance between columns: 2665 mm Axis: 4 Throat depth: 420 mm Maximum ram stroke: 200 mm Machine weight: 4850 kg
used
We are pleased to offer the following CNC turning center: DOOSAN PUMA 400LMB Year: 2011 Serial No.: ML0136-004494 Specifications: 15” chuck Spindle bore: 132 mm / 5.197” Through drawbar: 116 mm / 4.56” Maximum work length: 2,028 mm / 80” Approximately 13,000 cutting hours Long-bed configuration Machine reported to be in very good condition
Key data: 100 t, 2500 mm, 2050 mm
Hydraulic press brake HACO ERM 25100 Year of Make: 2005 100Tx2500 Light barrier: Fiessler AKAS Tool holder: AMADA Promecam Type A tool holder Back gauge: Controlled X-R-Z1-Z2 axles New control system 2026! Immediately available! To be viewed under power!
It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-515
It is a new CNC replacement control for Tornos Bechler type TBS 364 sliding head automatic lathes. Auction-ID: A1-50529-516
General Description CNC laser-punch combination machine manufactured by AMADA , model EML 3610 NT . Combines high-speed CNC turret punching with 4 kW CO₂ laser cutting in a single production system. Equipped with automatic sheet loading and unloading for efficient, largely unattended sheet-metal processing. Technical Details Manufacturer: AMADA Model: EML 3610 NT Machine type: CNC laser-punch combination machine Year: 2006 Serial number: 43610024 Laser: 4.0 kW CO₂ Punching force: 300 kN (30 t) Working area: Approx. 3,050 × 1,525 mm Z-turret with 45 tool stations 4 auto-index stations AMADA / FANUC CNC control Automatic sheet loading and unloading system MP300 material handling system Donaldson Torit DCE extraction / dust collection system Turbo blower replaced approx. 400 operating hours ago Vacuum pump replaced approx. 600 operating hours ago Dimensions Machi ...
turning diameter: 190 mm turning length: 620 mm control: Fanuc 18 iT max. bar diameter through the spindel: 65 mm number of controlled axis: 9 y-axis: +/- 45 mm turning speed range: 4500 U/min power capacity: 15/11 kW rapid speed: m/min swivelling range: +/- 91 ° Grad number of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/min Spindelpower on driven tool: 5,5/3,7 kW tail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: m weight of the machine ca.: 12,5 t CNC- lathe with sub spindle - 2 turrets, universal for main.- or sub- spindle - upper turret switchable - Y- axis on upper turret - both turrets with 12/24 positions - collet chucks on main- and sub spindle - chip conveyor - parts catcher typ A - few toolings The data for this ad was created with ModulMWS - the software solution of Logo ...
turning diameter: 540 mm turning length: 1020 mm control: FANUC 18 i-TB swing diameter: mm bar diameter: 65 mm travel -x axis: 555 / 185 mm travel -y axis: 160 mm travel -z axis: 1095 mm travel -z axis (sub spindle): 1065 mm spindle speed:: 5000 / 5000 1/min spindle bore: 76 / 76 mm C-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/min Driven Tools: 4.000 U/min b-axis: 240 ° rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min drive capacity - spindle motor: 22 / 22 kW voltage: 400 V toolpiece magazine: chain magazine: 40 Pos. tool taper: HSK-A 63 milling drive: 15 kW driven Tools: 5,5 kW total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 4,30 x 2,30 x 2,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 130 t, 3000 mm
Sell a well-preserved CNC Hydraulic Press Brake from Trumpf Model V130. The dimensions of the machine are LxWxH 1900mm x 3800mm x 2950mm. The weight is about 13000kg. The edge length is 3000mm. Incl. a set of tools. If you have any further questions, please contact us. The machine can be viewed under power by prior appointment. The sale is without guarantee and warranty. Returns are excluded. All information without guarantee.
Key data: 26 mm
Control: Traub TX 8i Main spindle max. rod Ø: 26 mm Max. speed: 8,000 rpm Sub-spindle max. rod Ø 26 mm Max. speed: 8,000 rpm Tool system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front apparatus 5-way with Z3 carriage without drive Reverse processing station (5 tools) without drive IEMCA BOSS 432/44 Bar Feeder
Machine Type: CNC Turning-Milling Center Model No.: NT4200S/1000 Control: FANUC F-31-IA5 MSX711 Year of Make: 2006 Location: Germany Technical features and accessories: - y-axis - Fully indexable b-axis - Chip conveyor, right ejection - Coolant system standard - Interface for high-pressure coolant system 70 bar - Tool spindle with flow cooling - Coolant spray gun - Blowing air through the sub-spindle - Manual tool presetting in the main spindle - Signal light 3-colour - Double footswitch - Simultaneous 5-axis machining - Automatic power shutdown - Tool offset for 5-axis machining - Programmable data input - Dynamic exchange of diameter/radius - Lifting test before movement Turning length: 1,000 mm Bar passage: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/ 15 kW Spindle passage: Ø 73 mm Sub-spindle: Max. speed: 5,000 rpm Drive power ...
The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW
With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets. Additional technical specifications: • Max. swing circle: 360 mm • Collet chuck: ISO DIN 163 E • Tool holder square: 16 x 16 mm • Tool holder Round: 20 mm • Spindle power: 5,5 kW • Tool places in total: 7 pieces - External: 4 / Internal: 3
With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B. Additional technical specifications: • max. Load: 11,0 kW • Swing diameter over bed: 510 mm • Swing diameter over cross slide: 290 mm • max. turning diameter (recommended): 170 mm • max. turning diameter (technical): 320 mm • travel of X-axis: 400 mm (160 + 15 mm) • travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.
With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm. Additional technical specifications: • spindle chuck diameter: 169 mm • boring bar diameter: 25 mm • cutting feed X, Z: 0.001 - 500.000 mm/rev
Manufacturer: Star Model No.: ECAS 20T Year: 2008 Condition: Used Stock number: 9553 Control system: Siemens Sinumerik Operating hours: 6000 h Maximum spindle speed: 10000 1/min Max. rod diameter: 20 mm Length: 2588 mm Width: 1150 mm Height: 1765 mm Weight: 3500 kg
Manufacturer: Tornos Model: Deco Sigma 8 Year: 2007 Condition: Used Stock number: 9554 Control system: FANUC Series 32i-MODEL A Operating hours: 15200 h Maximum spindle speed: 15000 1/min Max. rod diameter: 10 mm Length: 1670 mm Width: 870 mm Height: 1650 mm Weight: 1600 kg
Stock No.: 4053 MACHINING CENTER Manufacturer: EMCO, Type: MMV 2000 Serial No.: M-20906019, Year of manufacture: 2017 Specifications: Table size 2400 x 950 mm Large table load 2200 kg Longitudinal movement (X) 2000 mm Transverse movement (Y) 800 mm Vertical movement (Z) 750 mm Spindle taper SK 40 ISO Spindle speeds 50-15000 rpm Spindle motor 46 B-axis angle +/- 120 angular degrees Tool Changer 40 Control Siemens 840 D SL Controlled in axles 4 Operating hours spindle 4488 hours Accessories: Cooling by spindle 20 bar Chip conveyance. Tool Measuring Dimensions: Length: 2886 mm, Height: 3277 mm, Width: 4450 mm, Weight: 22 kg
Key data: 3000 mm, 1500 mm, 6000 W
with Bytrans Extended
EMCO Hyperturn 665 MC PlusYear of manuf. : 2008 Control : Siemens 840D - Powerline Turning diam. : 430 mmTurning length : 744 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:5.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Röhm KZZT-AF 65/6Subspindle:Technology:MotorspindleSpeed:7.000 rpmPower (max.):22 kWTorque (max.):130 NmWorkpiececlamping:3-Jaw chuck, Röhm KFD-HE 210Ejector:PneumaticMovement in Z:750 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:270/100/750 mmEilgang in X/Y/Z:24/10/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:4.000 rpm, 6,7 kW, 25 NmMovement in X/Z:205/750 mmEilgang in X/Z:24/30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal coolant pumps with High- ...
Key data: 340 mm, 1000 mm, 3500 1/min
Stock No.: 4021 CNC LATHE Manufacturer: Okuma, Type: LB300MY-1SC 1000 Serial No.: 164, Year of manufacture: 1999 Specifications: Max. circumferential diameter 340 mm dia. Max. turn. About bed 530 mm Dia. Turning length 1000 mm Main spindle speed range 3500 rpm Spindle bore 70 mm dia. C axis - main spindle movement 0.001 X axis movement 260 mm Y axis +70 / -50 Tool turret with 12 stations Driven tools 4000 rpm Control OSP 7000L Operating hours spindle 5898 Accessories: Hydraulic Main Center Chuck Kitagawa HoH 12" / 304mm Tool setter Chip conveyance. Cooling water system. Hydraulic tailstock. Dimensions: Length: - mm, Height: - mm, Width: - mm, Weight ...
Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Year of construction 2023 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 5000h Machine running time approx. 11,000h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition
used
Key data: 685 mm, 635 mm
Circumference over bed 685 mm Turning diameter over carriage 465 mm Turning length 635 mm Speed range 5000 rpm Drive power 100/40% 25 /37 KW Weight 6500 KG CNC HEIDENHAIN Pilot BERG Chuck 12-fold SAUTER revolver VDI 40 m. WZ Tailstock hydraulic Chip conveyor 25 steel holders 8 drill rod holders 10 antr. Holder axisl u.radial
CITIZEN CINCOM R 04 VI ist ein CNC-Langdrehautomat (Swiss-Typ) mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: Ø max 4 mm, Drehlänge 40 mm, Spindeldurchlass 9 mm, Gewinde bis M3. Daten: 6 Achsen, 2 Spindeln, bis 20000 t/min, Spindelleistung 0,5/0,75 kW, 15 Stationen; Drehwerkzeuge 5, Bohrwerkzeuge 4, Querwerkzeuge 2, Schaft 8 mm; Anschluss 3x400 V 50 Hz, Gewicht ~850 kg, Abmessungen 1485×560×1410 mm. Zubehör: LNS TRYTON 107 Hybrid Lademagazin, Teilefänger, Kühlsystem, Ölnebelabsaugung ELBARON, Lampe. Geeignet für enge Toleranzen in Automotive, Uhrenindustrie, Medizintechnik, Luftfahrt. Technische Daten ohne Gewähr
TRAUB TNX 65/42 ist ein CNC Kurzdrehautomat mit fester Spindel, für präzise, hochgenaue und zuverlässige Bearbeitung. Drehlänge 220 mm; Spindeldurchlass 65 mm; Z 300 mm (2 Schlitten), Y 140 mm. Spindel 5000 U/min; Gegenspindel 7000 U/min. 2 Revolver; Werkzeuge 10/8, angetriebene 10/3 (6000 U/min); C 0,001°. Anschluss 50Hz 3×400V; 95 kW (80 kVA). Gewicht ~9000 kg; L5480×B3100×H3200 mm. Geeignet für enge Toleranzen in Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr
2x Chiron FZ 08 S, built in 1999/ 2000. Fully functional and ready for operation.
A Maho 4-axis CNC machining center is offered for sale. X/Y/Z travel: 600mm/500mm/400mm, tool holder: ISO 40, max. spindle speed: 6000rpm, feed rate: 6m/min, rapid traverse: 13m/min, operating hours/power-on hours: approx. 58569h, control: Philips CNC 432. Equipped with through-spindle coolant supply with high-pressure pump, fully enclosed splash guard, automatic tool changer, 2-pallet changer and chip conveyor. The main spindle is defective and has already been removed from the machine. The machine is not operational. Documentation available. An on-site inspection is possible.
DMG GILDEMEISTER SPRINT 42 linear CNC automatic lathe was built in 2006 in Italy by GILDEMEISTER Italiana S.p.A. The machin was regularly serviced and maintained throughout its entire service life, and underwent a major overhaul in 2018. The DMG GILDEMEISTER SPRINT 42 linear is a high-performance automatic lathe designed for the automatic machining of workpieces with a maximum diameter of 42 mm. The machine enables precise turning, milling, drilling and threading of bar stock within a single process. Its wide range of machining capabilities, combined with reliable components, makes it an excellent choice for the mass production of complex components used in many industrial sectors. Machining is performed using the main spindle and the sub-spindle. This solution allows operations to be performed on both sides of the workpiece without the need to re-clamp it. Once the first machining ...
Last calibration 2024 , serial number 105363 , equipped with a wide range of: measuring heads , Renishaw button , calibration ball , iverse clamping devices and documentation. Dimension of the measuring plate approx. 2700x2100 , Measuring range X: 2000mm , Measuring range Y: 1200mm, Measuring range Z: 1500mm , Maximum workpiece weight total 1000Kg with even distribution. For more details see photo of the manual. Auction-ID: A7-50677-473
HAAS ST-10 CNC turning center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine is designed for the production of precision parts used in various industries. It enables the efficient turning of workpieces with a maximum diameter of 305 mm and a length of 406 mm. Machining is performed using a spindle with a maximum rotational speed of 6000 rpm. The HAAS ST-10 works in two axes, X and Z, with feeds of 200 mm and 406 mm respectively. The turret allows for the use of different tools during machining and enables their rapid exchange. All this is complemented by a compact, highly rigid design. The ST-10 CNC lathe is operated using an intuitive HAAS CNC controller with access to numerous advanced functions. The machine is also equipped with a measuring probe and a chip conveyor designed to automatically remove chips from the work area. The total weight of the ma ...
CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control. Travel distances X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL and extensive clamping device package. Including additional flushing, heat exchanger water/water and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop. Auction-ID: A7-50677-100
This 3-axis SCM Morbidelli M220 CNC machining centre was manufactured in 2019. It features a working area of 5,510 x 1,620 x 180 mm and a powerful 15 kW liquid-cooled HSK 63F electrospindle with speeds up to 24,000 rpm. The machine includes a F29LTC drilling head with 17 vertical and 6 horizontal drilling units, as well as a high-performance vacuum clamping system. If you are looking to get high-quality machining capabilities, consider the SCM Morbidelli M220 machine we have for sale. Contact us for further details.
turning diameter: 320 mm turning length: 305 mm control: Fanuc total power requirement: kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 385 mm max. turning diameter: 620 mm turning length: 958 mm control: MSD 501 II Mori Seiki greates pass round over bed: 710 mm Swing dia. over traverse guideway: 738 mm centre distance: 1.125 mm Main spindle:: turning speed range - main spindle: 10 - 1.600 min/-1 power capacity - main spindel: 30 / 22 kW spindle bearing diameter: 180 mm spindle bore: 130 mm spindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mm z-axis: 995 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 32 mm Drill shank diameter: max. 60 mm turret change time: 0,4 sec. Tailstock:: tailstock adjustment: 850 mm dia. of quill: 110 mm taper of center: MK 5 quill stroke: 150 mm feeds:: rapid traverse: X: 20 / Z: 24 m/min Tipp feed: 0 - 1.260 mm/min total power requirement: 64 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,0 x 2,5 x 2,5 m Documen ...
turning diameter: 620 mm turning length: 2000 mm control: MSX 501 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 2 Wochen ab Auftragse : Türkei : 153986 € : 1867.32 € : 98800 € : 320 to : 3050 mm : 365 mm : 2600 mm : 750 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet ...
maximum number of results exceeded
please refine your search
200 € 
