136,742 used machines on RESALE, but how to find them? Machine Search
This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details.
A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible.
This 3-axis OKK VP600 was manufactured in 2006. It features an X-axis travel of 1,120 mm, Y-axis travel of 610 mm, and Z-axis travel of 460 mm. The machine has a maximum table load capacity of 1,200 kg and operates with a spindle speed of 12,000 RPM. If you are looking to get high-quality machining capabilities, consider the OKK VP600 vertical machining centre we have for sale. Contact us for further details.
This 3-axis DMG Mori Seiki NVX 5080 II/40 was manufactured in 2013. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a weight of 6350 kg and is equipped with a rated power of 34 kVA. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki NVX 5080 II/40 vertical machining center we have for sale. Contact us for further details.
This 4-axis MORI SEIKI DuraVertical 5080 was manufactured in 2008. It features an X-axis travel of 800 mm, Y-axis travel of 530 mm, and Z-axis travel of 500 mm. The machine has a robust weight of 6100 kg and includes a rotary/indexing table, which has been unused since new. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5080 vertical machining centre we have for sale. Contact us for further details.
Used vertical packaging machine by Unipak Gniezno type ASG-1. New 1992. Packs loose materials in heat-sealed foil. Possibility to pack different weights in bags up to 1 kg.
This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details.
Weight: +/- 1,1 tons Power: 15 kW Length mm: 6800 Width mm: 1300 Height mm: 2300 Working height: 400 Transport size L x W x H: 2,5 x 2,4 x 2,3 mtr Maximum speed: 4 m/min Min.-max. glass thickness: 2 - 12mm Min.-max glass size: 2 x 3 Number of brushes: 4 brushes Condition machine : Disassembled in working order Control type: Manually Electric. Connection: 32A 3P+N+PE Photos/film available: Photos and video available Remaining: Left to right / RVS
This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 50 3rd gen was manufactured in 2017. It features impressive axis travels of 650 x 520 x 475 mm and a maximum spindle speed of 15,000 rpm. The machine includes a tool magazine capacity of 60 positions and a robust table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 50 3rd gen vertical machining centre we have for sale. Contact us for further details.
Serial Number: 7880-10 Weight: 2,5 tons Power: 6 kW Air pressure: 6 bar Length mm: 5000 Width mm: 1000 Height mm: 3500 Working height: 70 cm. Transport size L x W x H: 5,0 x 1,0 x 3,5 + 1,1 x 0,8 x 1,35 Maximum speed: 1,6m/min. Min.-max. glass thickness: 50 mm Condition machine : Good Control type: Manually/ semi automatic Electric. Connection: 400 V Documentation: No Instructions: No Electric diagram: No Photos en video available
2 TOOLS Auction-ID: A1-50405-5
This 3-axis MIKRON VCP 800 was manufactured in 2003. It features an X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 450 mm. The machine is equipped with a Heidenhain iTNC 530 control and a high-speed spindle capable of reaching up to 20,000 rpm. If you are looking to get high-quality machining capabilities, consider the MIKRON VCP 800 vertical machining centre we have for sale. Contact us for further details.
This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.
This 3-axis HERMLE C800V vertical machining centre was manufactured in 2000. It features a travel range of 800 mm in the X-axis, 600 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a 30-position tool changer and a spindle speed range of 16,000 rpm. If you are looking to get high-quality machining capabilities, consider the HERMLE C800V machine we have for sale. Contact us for further details.
This 3-axis Makino V55-A15 was manufactured in 1998. It features a spindle speed of 15,000 rpm and offers a generous X-axis travel of 900 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. The table dimensions are 1000 x 500 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the Makino V55-A15 vertical machining centre we have for sale. Contact us for further details.
This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine.
with Fanuc 0i TF Plus Capacity : Max. Swing Slide 1350 mm Max.Turning Dia x Height 1250 x 150 mm Standard turning Dia x Height 800 x 835 mm Max. Job weight including Fixture / Chuck 2000 kg 1.2 Table Spindle Drive with Gear Box: Spindle Tapper Straight locating Dia 160 mm Front bearing diameter Dia 500 mm, Dia 300 mm Spindle speed range 10 - 250 rpm Spindle power, S1 / S3 22 / 30 kW Spindle Torque S1 / S3 2495 / 3400 Nm Spindle range for spindle constant power 84 - 250 rpm 1.3 Axes Drive : Traverse X/Z 675 / 850 mm Rapid Traverse rate 16 m/min 1.4 Turret (Hydraulic) : Turret number of station 12 Nos. Tool Shank 32 mm Boring Tool Holder Dia 60 mm IFTD with boring bars in adjacent pocket 260 mm IFTD with boring bars at 60deg pocket No Tool in adjacent pockets 560 mm 1.5 General Details : Coolant tank capacity 300 ltr Hydraulic power pack ...
ID3858 Furukawa HCR1450 ED year/Baujahr 2015 10.150 hours/hours 15.3 t Blast-hole drill rig; new engine installed approx. 1,490 hours ago; old engine—still functional—included (high crankcase pressure due to worn piston rings); includes a pallet of spare parts (5 hammer shanks, filters, GT51 drill rods, drill bits, etc.); additional drill rods available optionally Blast hole drilling rig, new engine approx. 1,490 hours ago, old engine – still functional is included (increased crankcase pressure = piston rings worn), incl. pallet with spare parts (5 hammer insertion ends, filter, GT51 drill pipe, drill bits etc.), optionally more drill pipe available
MACONSE industrial vertical autoclave/sterilizer, model 33121, manufactured in 2015, designed for the treatment of SANDACH animal by-products. Approximate capacity of 3,000 liters, useful diameter of 1,400 mm, working temperature of up to 140 °C and maximum pressure of 3 kg/cm². The equipment includes a 4.6 kW stirring geared motor, lobe pump, pneumatic panel, pipes, valves, instrumentation and auxiliary systems. It requires a 380 V three-phase + neutral power supply, steam and compressed air supply at approximately 6 bar. According to the information provided, the equipment was discontinued in 2019. The original electrical panel was disabled after an incident and is currently not included; operation was carried out through maneuvers and programming with an external PLC. The equipment shows signs of deterioration over time, including oxidation in carbon steel elements, deteriorated ...
This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.
This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details.
vertical machining center, year 2009, CNC 0i-MC. Used machine. More info & price on IndustrialBuyer.
Innotech vertical bag form-, fill- and seal machine, type: 3800, serial number: 106 00 349, year of construction: 2000, 230/400 V, 50 Hz, diameter filling pipe: Ø 125 mm, film width: 470 mm, seal length: 400 mm, total dimensions: 2650 mm x 1850 mm x 2600 mm.
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
x-travel:800 mm y-travel:460 mm z-travel:510 mm total power requirement:20 kW weight of the machine ca.:8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough.
x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
Key data: 1625 mm, 860 mm, 760 mm
Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor
max. wheel diameter:180 mm max. module:7 hob turning speeds:200-2000 U/min min. number of teeth:4 excluding conveyor belt
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
turning diameter:250 mm swing diameter:260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools!
X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008
weight of the machine ca.:9,5 t x-travel:406 mm z-travel:380 mm
pulling force - max.:80 t total wight:26 t dimensions of the machine ca.:49 m² m total power requirement:85 kW working stroke:250 mm
YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions
DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...
turning diameter:150 mm total power requirement:36 kW
turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m
turning diameter:150 mm total power requirement:36 kW dimensions of the machine ca.:6,20 x 5,16 x 3,35 m
x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor
max. wheel diameter:180 mm gear width: mm max. module:4 total power requirement:14 kW weight of the machine ca.:8 t slide travel axial ( Z-axis ):300 mm work piece - max.:490-640 mm
MATSUURA MC 600 VF Vertical Machining Center YOM 1996 X axis 600 mm Y axes 410 mm Z axis 470 mm Working capacity 600 x 410 x 470 mm Tool changer 20 TC Table capacity 800 x 400 mm Table load 400 kg Spindle speed range 30- 8000 Rpm Spindle taper ISO 40 Spindle bore 80 mm Weight 4000 kg
x-travel:1270 mm y-travel:460 mm z-travel:660 mm Machine hours: 58,355 Spindle speed: 8,000 rpm
CNC Machining Center Vertical DECKEL-MAHO - DMC 635 V Built in 2006 in good condition. Control iTNC 530 Heidenhain Duty Cycle: 35172 Hours: 5903 Specifications: x-travel 635 mm y-travel 510 mm z-travel 460 mm Main Spindle: Speed range - main spindle 20 - 8,000 min/-1 Drive power - main spindle 13 / 9 kW Tool holder SK 40 DIN 69871 Max. torque 83 / 57 Nm Clamping force 8 kN Workbench: Table clamping surface 790 x 560 mm Number of T-slots 4 + 1 T-slots - spacing 100 mm T-slots - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg Table height above floor 720 mm Distance between spindle nose and table 120 - 580 mm Tool changer: Number of tool slots 20 pos. Max. tool width 80 / (130) mm max. tool length 250 mm max. tool weight 6.0 kg max. total weight 80 kg Tool - Tool change time 1.6 sec Changeover time span - span 6.0 sec Feeds: Rapid traverse 30 m/mi ...
x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm
maximum number of results exceeded
please refine your search
2.000 € 
