137,377 used machines on RESALE, but how to find them? Machine Search
A CNC press brake Amada is available. Press force: 800kN, bending length: 2500mm, press beam length: 2570mm, distance between uprights: 2125mm, throat depth: 420mm, max. stroke: 350mm, installation height: 620mm, table width: 60mm, table height: 960mm. Machine dimensions X/Y/Z: approx. 3300mm/1600mm/2750mm, weight: approx. 6100kg, control system: Amada. Documentation available. An on-site inspection is possible.
CNC lathe Gildemeister Twin 65Y RG2 Year of Make: 2003 Control Siemens 840D CNC Twin Spindle Turning Center Design Main/Sub-Spindle Yes Turret 2 × 12 stations Tool holder VDI 30 Powered Tools Yes Y-axis Yes (upper turret) C-axis main and counter spindle Workspace Feature Value Max. turning diameter 250 mm Max. turning length 650 mm Max. turning Ø over bed approx. 340 mm Bar passage 65 mm Main spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Gjbr U Uozl Dy Nek Rhsud Torque 370 Nm C-axis 0.001° Sub-spindle Feature Value Speed 20–5,000 min⁻¹ Power 35 kW Torque up to 370 Nm Bar passage 65 mm C-axis 0.001° Travels Axis Value X1 300 mm Z1 650 mm Y 80 mm (±40 mm) X2 180 mm Z2 650 mm Tool turret Number of stations 12 + 12 Tool holder VDI 30 Driven tools 4,000 min⁻¹ Power tool drive 11 kW Torque tool drive 28 Nm Chip conveyor Hig ...
With CNC control, HEIDENHAIN, type: TNC 155, with touch probe Travel: x=700 y=550 z=550mm. Size table area 1000 x 490 mm Accessories: Chip conveyor / coolant system / tool holders SK3. Machine is presentably ready for operation under power. Milling machine with protective cabin. The milling machine can be operated at any time without protective cladding and is then "quite handy". Dimensions of milling machine: , width is 1.6m, depth is 2.3m, height is 2.15m and cabinet width is 1.5m
We offer the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in demand, it will not be used. The machine is in its original packaging and unused. 5 - Axis CNC Portal Milling Machine, New Make : HURCO Type : DCX 32-5 Si Year of manufacture : 2025, Delivery 3 / 2026 Control: MAX 5, 2 screens TRAVELS X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal stand: 2,130 mm Distance spindle nose to table: 66 – 966 mm SPINDLE / HEAD Clevis CYTEC Tool holder: HSK63-A Max. speed: 18,000 rpm Power : 63 kW Max. torque: 106 Nm Rapid traverse: 15/15/10 m/min Tool Changer / ATC : 60 - speed EQUIPMENT : - IKZ internal cooling by spindle 40 bar - KNOLL belt filter system - KNOLL chip conveyor - Di ...
Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible.
A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.
A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.
A Strausak CNC 5-axis tool grinding machine for the production and resharpening of solid carbide, HSS and special tools is available. Travel X/Y/Z: 420mm/250mm/485mm, B-axis: 340°, C-axis: 360°, Rapid traverse X/Y/Z: 15m/min, max. tool diameter production/resharpening: 32mm/150mm, max. tool length: 500mm, max. cutting length: 300mm, Tool holder: HSK63F/SK50, Speed: 12000rpm, Tool positions: 6. Machine dimensions X/Y/Z: approx. 2250mm/2200mm/2200mm, Weight: approx. 4350kg. Documentation available. An on-site inspection is possible.
CNC punch press manufactured in 1998. This AMADA Vipros 358 King features a maximum workpiece length of 4,000 mm and a maximum workpiece width of 1,270 mm. It offers a punching force of 300 kN and a maximum stroke of 40 mm. If you are looking to get high-quality punching capabilities, consider the AMADA Vipros 358 King machine we have for sale. Contact us for further details.
x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC tool grinding machine Ewag for rotationally symmetrical tools is available. Travel X/Y/Z: 460mm/190mm/730mm, Rapid traverse: 6m/min, Max. tool length: 500mm, Spindle interface: ISO50. Machine dimensions X/Y/Z: approx. 3300mm/2300mm/2500mm, Weight: approx. 3000kg. Documentation available. An on-site inspection is possible.
AFM DEFUM BACA R-1000 CNC vertical machining center was built in 2013 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for the precision machining of workpieces with a maximum weight of 500 kg. The combination of a stable design and high-quality components guarantees the best machining results. This makes the CNC milling machine ideal for use in production plants, both for unit and series production. Workpieces are machined in three axes X, Y and Z with feeds of 1000 mm, 510 mm and 560 mm respectively. To ensure excellent dynamics and repeatability of feeds, all linear axes are driven by efficient servo drives. The spindle, operating at a maximum speed of 8000 rpm, features a BT40 taper, which enables the use of a wide range of cutting tools designed for various machining operations. The work table with a length of 1200 mm and a width of 500 mm is equipped with T- ...
Key data: 4500 mm, 5500 mm, 3500 mm
Built in 1978 Mount: Capto C 6 The axles : Y and Z have been overhauled With face plate extension: approx. 8500 mm. Crossbeam Support Extension Horizontal: 2950mm Main motor power: 55 Kw Control: Siemens 840D SL New control cabinet Face plate: New face plate drive. Hdrostatic face plate bearing Machine is energized All information without guarantee. Subject to prior sale Extensive tools Control station for faceplate monitoring
A Hedelius CNC 3-axis machining center is available. Travel X/Y/Z: 2490mm/630mm/750mm, table dimensions X/Y: 3200mm/650mm, tool holder: SK40, spindle speed: 8000rpm, tool positions: 48, coolant tank volume: 350l. Machine dimensions X/Y/Z: approx. 6500mm/3700mm/3700mm, weight: approx. 16500kg, control: Heidenhain TNC426. Including coolant tank, divided working area, chip conveyor and through-tool coolant. Documentation available. An on-site inspection is possible.
A CNC 5-axis pentapod machining center Metrom is available. Axes: 5, Travel X/Y/Z/V: 1600mm/2800mm/1000mm/3200mm, A-axis swivel: 90°, Table dimensions X/Y: 1600mm/1800mm, Tool interface: HSK63, Speed: 15000rpm, Spindle power: 25kW/32kW. Machine dimensions X/Y/Z: approx. 6500mm/4000mm/4500mm, Weight: approx. 14000kg, Control: Andronic 2060. Including enlarged worktable, coolant system with 200l tank, Blum TC 50 3-D touch probe, additional holder and milling spindle. Documentation available. An on-site inspection is possible.
FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is a high-performance sheet metal machining center that combines punching and laser cutting technologies. It enables comprehensive machining of workpieces with a maximum thickness of 8 mm, eliminating the need for additional operations on other machines. The use of both these technologies in a single system reduces task completion times and increases overall production efficiency. Punching is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch’s movement to be ...
Travel X/Y/Z: 500mm/3590mm/250mm, wire diameter range: 0.15mm-0.3mm, max. workpiece dimensions X/Y/Z: 1050mm/650mm/250mm, max. workpiece weight: 400kg/800kg, max. taper: 30°/100mm, wire speed: 300mm/s, max. surface quality: Ra 0.1µm. Machine dimensions X/Y/Z: approx. 2800mm/2400mm/2250mm, weight: approx. 4500kg, control: Agie, operating hours: approx. 151182h. Documentation available. An on-site inspection is possible. The image is an example.
FINN-POWER LP6 punch laser machine was manufactured in 2008 in Finland by FINN-POWER OY. The machine was used for machining AISI 304 and AISI 316 stainless steel sheet metal. Since its purchase, it has been regularly serviced by the manufacturer and has undergone annual technical inspections. The FINN-POWER LP6 is designed for the comprehensive machining of sheet metal with a maximum thickness of 8 mm. It enables both punching and laser cutting in a single work cycle, reducing the need for additional operations on other machines. The combination of both these technologies in a single system speeds up task completion times and increases the efficiency of the production process. The punching process is performed by means of a hydraulic cylinder, whose stroke and speed are fully numerically controlled. The ability to programme the upper stroke limit enables the punch movement to be pr ...
An optical 3D coordinate measuring machine Keyence is available. Measurement accuracy: +/-10µm, repeatability: +/-2µm, measurement points: 9 million, max. measurement diameter: 300mm, max. measurement height: 200mm, max. measurement dimensions (multiple capture) X/Y/Z: 580mm/300mm/200mm, max. workpiece weight: 50kg, table tilt: 45°. Including control and evaluation software, rotary table and calibration accessories. Documentation available. An on-site inspection is possible. The image is an example.
A Mitutoyo CNC bridge coordinate measuring machine is available. Travel X/Y/Z: 1200mm/2000mm/1000mm, measuring volume: 2.4m³, max. workpiece weight: 2500kg, max. workpiece height: 1000mm, probe system: Renishaw, probe positions: 20, measuring accuracy: 2.3+/-0.3/100µm, max. travel speed: 693mm/s. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/3600mm, weight: approx. 6150kg, control: Mcosmos-3 V4.3. Documentation available. An on-site inspection is possible.
Key data: 3050 mm, 800 mm, 850 mm
From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg
CNC punch press manufactured in 2008. This Muratec Motorum 2548 features a punching force of 25 t and a maximum sheet thickness of 6.35 mm. It offers an impressive X-axis travel of 2550 mm and Y-axis travel of 1600 mm, accommodating sheets up to 1250 x 5000 mm with repositioning. If you are looking to get high-quality punching capabilities, consider the Muratec Motorum 2548 machine we have for sale. Contact us for further details.
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm Control: Kelco total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 100 mm turning length: 100 mm Main Spindle:: spindle motor: 7,5 / 11 kW spindle passage: 42 mm collet diameter: DIN 173E (A5) spindle turning speed range: 6000 U/min rapid traverse: 30 m/min travel x / y / z: 300 / 770 / 250 mm 2nd Spindle:: spindle motor: 2,2 / 3,75 kW spindle passage: 30 mm dia. of draw-in collets: DIN 173E (A5) mm spindle turning speed range: 6000 U/min rapid traverse: 30 m/min travel x / y / z: 900 / 770 / 300 mm control: Mitsubishi M830 tool taper: ER 20 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,8 x 2,2 x 2 m Simultaneous machining on the main and counter spindles - Mitsubishi M830 CNC control with electronic handwheel - Main and counter spindles -- each with C- and Y-axes -- 173 E collet chuck (A5) - Swivel head (B-axis 0–360° in 0.001° increments) on the main and counter spindles - 36 tool ...
control: FANUC 0i TC turning diameter: 520 mm turning length: 1090 mm turning speeds: -3500 U/min Top turret tool hodler:: 12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min Overall size: 3000 x 1800 x 2000 mm weight of the machine ca.: 6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer PINACHO Model RHINO SK – 425 Year 2005 CNC GE Fanuc Series 21i-T Capabilities and advances Distance between points 5,000 mm. Stitch height 425 mm. Support Guides 2 Maximum allowable turning on a bed 850 mm. Maximum turning on transverse carriage 560 mm. Bed width 425 mm. Fast Forward X/Z Axes 10,000 mm/min Work progress X/Z axes 7,000 mm/min Head Head shaft pitch 85 mm. Nose head DIN 55027-nº8 Main Spindle Morse Taper 5 Head speed 0-2,000 rpm Automatic head ranges 2 Main Motor Power 11 kW Turret Automatic Turret Type Turret Positions 8 Counterpoint Hydraulic tailstock rod outlet INCLUDED Ø of the tailstock shaft 96 mm. Tailstock shank travel 215 mm MORSE 6 tailstock cone Equipment Self-centering 3-jaw hydraulic chuck, diameter 300 mm INCLUDED 4-support bezel Ø450 mm. INCLUDED 3-support bezel Ø250 mm. INCLUDED Plate Protection INCLUD ...
control: FANUC 21i TB turning diameter: 355 mm turning length: 1330 mm c-axis: indexing: 0.001 ° turning speeds: -2800 U/min tool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/min rapid traverse Z-axis: 24 m/min Overall size: 4000 x 2000 x 2100 mm weight of the machine ca.: 6700 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC vertical machining center Type: VM-3 Manufacturer: Haas Year: 2022 Control: Haas Hours: 2087 X: 1016 mm Y: 660 mm Z: 635 mm Table: 1372 x 610 mm Max table load: 1814 kg Spindle cone: CT40 Max spindle speed: 12000 rpm Tool magazine: 30 positions Machine weight: 7000 kg Chip conveyor Tool and work probe In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.
CNC vertical machining center Type: VF-3YT Manufacturer: Haas Year: 2012 Control: Haas Hours: 22034 X: 1016 mm Y: 660 mm Z: 635 mm Table: 1372 x 610 mm Max table load: 1588 kg Spindle cone: CT40 Tool magazine: 20 positions Machine weight: 5700 kg Chip conveyor Tool and work probe In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
5-axis CNC machining center Type: UMC-750 Manufacturer: Haas Year: 2016 Control: Haas Hours: 2830 X: 762 mm Y: 508 mm Z: 508 mm Tool magazine: 40 positions Spindel taper: ISO 40 Chip conveyor Machine in good condition, fully functional, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines
This 3-axis BIESSE Skipper 100 was manufactured in 2009. It features a versatile working range with a maximum length of 3,000 mm and a width of 1,000 mm. The machine is equipped with 78 independent drilling spindles, allowing for efficient vertical and horizontal drilling, as well as routing and grooving capabilities. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Skipper 100 machine we have for sale. Contact us for further details.
Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, s ...
Manufacturer: SCM Model: Morbidelli M100 Type of Machine: CNC Machining Centre for Furniture and Panel Processing Year of Manufacture: 2019 Condition: Excellent, very little use Operating Hours: Approximately 2,000 hours Working Area and Panel Capacity: - Useful working field X axis: 3,110 mm - Useful working field Y axis: 1,620 mm - Panel passage on Y: 1,900 mm - Panel passage on Z: 180 mm - Length of piece in pendulum working mode: 1,400 mm - Machining Capability: Machining in 3, 4 and 5 axes; drilling, routing/milling, grooving and - panel processing - Main Software: Maestro CNC integrated CAD-CAM software - Operating System: Windows 7 - Main Display: 21.5 inch LCD, 16:9, Full HD Axis Speeds: - Maximum vector speed on X-Y (PRO-SPACE version): 56 m/min - Maximum vector speed on X-Y (PRO-SPEED version): 78 m/min Drilling and Grooving Group F23L: - Vertical independent spindle ...
4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a coolin ...
The machine is in good technical condition; testing is possible by prior arrangement. SPACESAVER SS 2101. Fanuc MSX-850 system.
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc Oi-TD system.
CORMAK CKT 500x850 CNC turning center was built in 2016 in Poland by CORMAK. The machine is designed for the precision machining of metal workpieces with a maximum diameter of 500 mm and a length of 850 mm. It enables a wide range of advanced operations, such as drilling holes, threading, and turning of cylindrical, conical and spherical surfaces. Thanks to its wide range of machining capabilities, the machine is ideal for the production of precise and repeatable parts used in various industries. The CORMAK CKT 500x850 features a rigid design that ensures stable operation even during intensive use. Workpieces clamped in a 10-inch manual chuck are machined by means of a spindle reaching a maximum speed of 2000 rpm and cutting tools placed in a 6-position turret. Precise positioning and support of the workpiece during the process is ensured by the tailstock. All machining parameters are ...
The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD system.
CNC punching machine manufactured in 2013. This Euromac MTX FLEX 12 hybrid features a maximum punching force of 30 tons and an X-axis stroke of 1250 mm. The Y-axis stroke is 1300 mm for multi-tool setups and 1250 mm for single-tool configurations. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX 12 hybrid machine we have for sale. Contact us for further details.
A Sodick CNC wire EDM machine is available. Travel X/Y/Z: 750mm/500mm/400mm, travel U/V: 770mm/520mm, max. workpiece dimensions X/Y/Z: 1050mm/750mm/400mm, max. workpiece weight: 1500kg, wire diameter range: 0.15mm-0.3mm. Machine dimensions X/Y/Z: approx. 2100mm/2800mm/2350mm, weight: approx. 5300kg. Documentation available. An on-site inspection is possible.
This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details.
The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.
turning diameter: 12,7 mm turning length: 50 mm control: Traub System TX 8i turning speeds: 12000 U/min c-axis: 0,001° gripping station: 12,7 mm c-axis: 0,001 ° speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,4 x 1,1 x 1,7 m driven tools: 6+4+4 Rev+S7+S8 CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.
Carousel Turning and Milling Machining Center with 2 machines + 7-pallet storage + 2 setup stations Each equipped with multiple turning and milling units (vertical/horizontal) Capto C6 or HSK100 Manufacturer: Waldrich Coburg Year: 2005 1 x MultiTurn 1500 FM, 1 x Multitec 2000 Control: Siemens Find more here - .ucymachines/ Contact us at - sales@ucymachines
centre distance: 1000 mm turning diameter over bed: 420 mm turning diameter over bed slide: 235 turning length: 1000 mm spindle taper: DIN 55027 Gr. 6 control: MANUALPlus 4110 spindle bore: 51 mm turning speed range: 3 - 3000 U/min feed:: 5.000/10.000 mm / min drive capacity - spindle motor: 11 kW taper in tailstock-quill: MK 4 dia. of quill: 70 mm quill stroke: 110 mm coolant: ja/yes voltage: 400 V Number of working hours: 6.908 h weight of the machine ca.: 3 t dimensions of the machine ca.: 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder - ...
A CNC laser cutting machine Amada is available. Laser type: CO2, laser power: 4kW, connected load: 43kVA, max. sheet dimensions: 1500mm/3000mm, max. sheet thickness steel/stainless steel: 10mm/12mm, control system: Fanuc, power-on hours: 34401h, operating hours: 21713h, cutting hours: 11111h. Including loader and unloader. Documentation available. An on-site inspection is possible.
turning diameter: 65 mm turning length: 150 mm control: Siemens 840D spindle passage: 75 mm turning length: 150 mm c-axis: 2x 0,001 ° gripping station: 65 mm speeds: 5000 U/min rapid traverse: 30 m/min turret (x-stations): 3x12 Number of axles: 10 St. number of toolholder-holes: 36 chip conveyor: ja / yes kW coolant filtering unit: ja / yes kW Number of working hours: 35000 h total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca m bar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A ZinserCNC plasma cutting machine is offered, max. plasma capacity: 130A, max. plasma material thickness: approx. 25mm, max. oxy-fuel material thickness: approx. 200mm, cutting table dimensions X/Y: approx. 2750mm/10500mm, working area X/Y: approx. 2000mm/9000mm, X/Y drive: rack and pinion, control: Zinser CNC 500. Inspection possible by appointment.
maximum number of results exceeded
please refine your search
