cnc turning used for sale

Including matching inserts; in 2 cardboard boxes Auction-ID: A1-49785-250

For internal, external; Includes 2 x bare tool with diameter 71 x 220 mm; unused and in original packaging Auction-ID: A1-49785-184

Shaft 40 mm; for ISO turntable SNM25; unused and in original packaging Auction-ID: A1-49785-237

8 pieces with shaft 12 mm; 12 pieces with shaft 16 mm; unused and in original packaging Auction-ID: A1-49785-151

Includes 150 Ceratizit matching DNMG150408 inserts Auction-ID: A1-49785-206

Shaft 25 mm; 4 pieces SDJCR for DVMT11T3 ; 4 pieces SVVBN; 8 pieces of SVJBR; for VBMT1604; unused and in original packaging Auction-ID: A1-49785-223

Including 150 matching turntables WNMG080412/ unused and in original packaging Auction-ID: A1-49785-25

4 pieces internally, 4 pieces externally, 8 pieces externally with direct cooling; For ISO turntables Auction-ID: A1-49785-179

Including CNMG12/ DNMG15 Auction-ID: A1-49785-26

In 2 cardboard boxes Auction-ID: A1-49785-314

For ISO turntables; shaft 8/ 10/ 12/ 16 mm; unused and in original packaging Auction-ID: A1-49785-190

Shaft 40 mm; Includes 30 matching Sandvik CNM1906 insert Auction-ID: A1-49785-238

For ISO turntables/ shank 20 to 40 mm/ total 15 pieces; unused and in original packaging Auction-ID: A1-49785-257

Inside and outside; unused and in original packaging Auction-ID: A1-49785-139

For insert CCMT06; 6 pieces S0608; 6 pieces S10; 6 pieces S12; unused and in original packaging Auction-ID: A1-49785-224

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ČKD Blansko Model: SK 25 A Year: 1960 Condition: Used Stock number: 9539 Max. turning diameter: 2500 mm Clamp plate diameter: 2400 mm Maximum workpiece weight: 14000 kg Max. workpiece height: 1600 mm Weight: 47000 kg

Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg

Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg

Consisting of: drills, drill heads, pins, centers, machine vises, Auction-ID: A1-50090-72

faceplate diameter: 5000 mm swing diameter: 8000 mm turning height: 4000 mm ram head dimension: 360 x 360 mm faceplate turning speed range: 0,6 - 60 U/min workpiece weight: 160 t main drive motor: 2x 70 kW control: FANUC total power requirement: - kW weight of the machine ca.: 85 t dimensions of the machine ca.: -- m The machine will be overhauled and modernised (upon order) and fitted with: - Fanuc CNC control system (latest model) - New electrical system - New hydraulic components: pumps, lubrication systems, hoses, valves, etc. - All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary. - 2 rams supports on the crossbeam CROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE) - Axial ram travel (Ram stroke) — 2500 mm - Horizontal carriage travel — 3400 mm - Swivel angle / Tiltability — 15 - 45° - Cross-rail travel (Arm travel) — 3600 mm - Saddle travel —  ...

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 2060 mm workpiece weight max.: 18000 kg faceplate turning speed range -stepless-: 1,02 - 92 U/min rapid traverse of cross-rail: 2500 mm/min slide adjustment: 2400 mm main drive motor: 60 kW Control: Fanuc 0iTF total power requirement: 75 kW weight of the machine ca.: 62,8 t dimensions of the machine ca.: 6,6 x 5,8 x 5,4 m Overhauled/modernized in 2026 - Complete replace of hydraulic & lubrication installation - New ball screws installed - Replace of electric installation and of command - Mechanical elements retrofitted and grinding of guideways (adjustment of the geometrical parameters of the machine according to ISO 3655) equipped with: - CNC control FANUC 0iTF - FANUC Drives and Motors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 4028 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 32D Proline Serial No.: 06-503, Year of manufacture: 2006 Specifications: Size Diameter 32 Main spindle speeds 6000 Main Spindle 5.5 effect Sub-spindle 3.7 kw Gengen Spindle 6000 C Axis Headspindle 5 C acshen sub-spindle 5 X-1 axis                            X2 Ashes                          X3 Ash                          Z1 Ash                           Z2-Acshe                           Z3 Ash                           Y-axis                            Rapid traverse 32 Control system MAIER PRO - FANUC 31iTA Axis Controlled 9 Opreation time 36749 Cutting time 9315 Tool holder 1 5 pc. 16x16 mm - 4 pc. Red. Tool  ...

Stock No.: 4026 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 26D Proline Serial No.: 05 385, Year of manufacture: 2005 Specifications: Size Diameter 26 Ma. Turning length (fixed guide bush) 320 Main spindle speeds 0-8000 Main Spindle 5.5 effect Sub-spindle                        Sub-spindle max dia. 26 C Axis Headspindle 5 Rapid traverse 32 Control Maier Pro - GE Fanuc Axis Controlled 9 Stanglademagazin FMB 3200 - NO. R-826374 – 2010

The machine is in good technical condition; it can be tested by prior arrangement.

Auction-ID: A1-50454-61

turning diameter over bed: 510 mm turning diameter over slide rest: 310 mm centre distance: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixed lot of lathe tooling consisting of indexable insert tool holders and conventional brazed/solid cutting tools in various sizes and configurations. lot weight: 28 kg. Auction-ID: A7-50717-249

Lot of 25 Microbore internal machining/boring toolholders, predominantly fitted with replaceable carbide cutting inserts. Various diameters, lengths and head configurations. Auction-ID: A7-50717-226

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

turning diameter:200 mm swing diameter:260 mm turning height:200 mm Tool table:1054 x 400 mm Dimensions (L/W/H):2200 x 2300 x 2300 mm weight:3300 kg slide travel radial ( X-axis ):520 mm slide travel axial ( Z-axis ):200 mm no pallet circulating belt, no C-axis, no driven tools

turning diameter:250 mm swing diameter:250 mm turning height:200 mm total power requirement:37,7 kW chuck diameter:315 mm spindle speed max.:5500 1/min travel -x axis:625 mm travel -y axis:+100/-80 mm travel -z axis:250 mm worktool system:VDI 30+40 weight of the machine ca.:8 t The synchronous spindle is powered with 37.7 kW of power, a torque of 300 Nm and a maximum speed of 5,500 rpm. Typical components are ball cages, ball hubs, gear wheels, sliding sleeves, pump wheels, flanges, synchronizer rings, bearing rings and pivot pins. The machine bed is made of Hydropol, a mixture of special concrete and steel, which ensures the greatest smoothness and precision even with larger components and powerful machining.

turning diameter:1000 mm swing diameter:1000 mm Machine type: Vertical lathe Manufacturer: Hessapp Type: DV 62 Serial no.: 14.2308 Working range of the spindle Largest diameter 1000 mm Largest swing diameter 1000 mm Cross slide travel Stroke of the vertical slide 900 mm Stroke of the horizontal slide 1810 mm Total travel 2315 mm Turning spindle Spindle head with centering cone according to DIN 55021 A15 Spindle diameter in the front bearing 203 mm Main drive Via a controlled asynchronous motor and gear transmission with range switching. Spindle speeds Speed range I: 5 - 350 rpm. Speed range II: 30 - 1000 rpm. Travel speed X/Z axis: 10 m/min. W1 axis: 8 rpm No C-Axis

swing diameter:400 mm turning height:950-1500 mm Turning length:210 mm x-travel:310 mm z-travel:350 mm spindle drive:48 kW spindle turning speed range:20-3500 U/min weight of the machine ca.:11 t dimensions of the machine ca.:4,5 x 3,5 x 2,7 m

swing diameter:400 mm turning height:950-1500 mm Turning length:210 mm x-travel:310 mm z-travel:350 mm spindle drive:48 kW spindle turning speed range:20-3500 U/min weight of the machine ca.:11 t dimensions of the machine ca.:4,5 x 3,5 x 2,7 m

turning length:630 mm total power requirement:16 kW weight of the machine ca.:5 t dimensions of the machine ca.:3400 x 1500 x 1600 mm swing diameter over slide rest:Hinterdrehschlitten 250 mm centre height:über Hinterdrehschlitten 150 mm center height over bed:300 mm turning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mm accessories::2 Schränke Wechselräder

turning diameter:300 mm swing diameter:350 mm turning height:275 mm x-axis:925 mm z-axis:250 mm clamping chuck diameter:200 mm Feed speed:30 m/min. total power requirement:45 kW weight of the machine ca.:7 t Machine was used just from time to time in the last years - very good condition! with CNC SIEMENS 840 D 12-station turret head with driven toolings workpiece in and out conveyor belt coolantattachment and chip conveyor diverse accessories

Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

spindle passage:25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Machine number: 2355 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel capability: +30° incl. extensive item spare parts and accessories, documentation, grinding wheels, belt filter system, extraction and filter Hours read: 2667 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-231

Machine number: 2356 Operating voltage: 400 V Frequency: 50 Hz Rated current: 125 A Connection: 45 kW Control: SIEMENS SINUMERIK Center height: 320 mm Center width: 3000 mm Max. grinding length: 3000 mm Grinding spindle diameter: max. 620 mm Grinding spindle tool holder: 80 mm diameter, taper 1:5 Swivel capability: +- 10° Workpiece spindle bore: MORSE K 6 mm Swivel position: +30° incl. extensive batch Tips in different sizes, matching steady rests, documentation, belt filter system, suction Hours read: 2355 Attention: the machine can be transported on a standard truck up to 3000 mm wide ! Auction-ID: A7-49089-235

Machine type: Vertical machining center Control: Heidenhain, Table load: 500 kg Tool magazine: 24 places The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Auction-ID: A1-50085-3

Used, untested. Documentation and instruction manual available. Equipped with automatic stop. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-12

Leadwell LTC-50CL CNC Lathe (10/2006) Manufacturer: Leadwell Type: LTC-50CL CNC Lathe Year of manufacture: 10/2006 Control: Fanuc, Tip width 2m Turning diameter of tip parts : Ø 700 x 2035 mm (above bed Ø 900) Turning diameter of chucks : Ø 800 x 500 mm Bezel, self-centering : Ø 35 to 240 mm Tool turrets : 12 tools Main spindle drive / gearbox : 2 stages, 1400 rpm, 37 KW Incl. chip conveyor, tailstock, tool turret & other accessories Auction-ID: A7-50270-5

Mecanumeric Normaprofil T2515 CNC portal milling, year of construction 2009. Machine suitable for processing plastics, composites, wood, resins and non-ferrous metals such as aluminum. Equipped with a vacuum clamping table, automatic tool changer, CNC control and extraction connection. The machine has a gantry construction and is designed for processing large workpieces. The T2515 model has a working range of approximately 3,100 × 2,100 × 870 mm. The manual control and head changer on the right side are defective and need to be checked. ATTENTION The machine must be disassembled by the buyer himself. Auction-ID: A3-46133-34030

OPTIMUM - OPTImill F 105 CNC Stock number 1039-8705 Machining Center - Vertical Manufacturer: OPTIMUM Type OPTImill F 105 CNC Year of construction 2019 Control Sinumerik 808D adv. Siemens Additional information: - DEMONSTRATION MACHINE Technical details: x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle 10 - 10,000 rpm Drive power - main spindle 11 / 7.5 kW Max. torque 70 / 48 Nm Tool holder BT 40 Work table: Table clamping area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm Distance spindle / table 100 - 600 mm Tool Changer: Number of tool positions 12 pos. Tool holder BT 40 max. tool diameter 70 mm max. tool weight 6.0 kg Tool-tool changeover time 7.0 sec Feeds: Rapid traverse ( X / Y / Z ) 10 m/min Feed speed max. 10,000 mm/min Repeatability +/- 0.008 ...

Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months