135,973 used machines on RESALE, but how to find them? Machine Search
Control Siemens ... Sinumerik 808 E Turning diameter ... 500mm Rotation length ... 1500mm Spindle bore ... 82mm Turret The machine is in good condition, possible to test under power.
DMG MORI NTX 2000/1500 SZM CNC turn-mill center was built in 2018 in Japan by DMG MORI CO., LTD. The machine on offer is an excellent choice for the mass production of precision parts, which are used in such industries as automotive or aerospace. This is because the NTX 2000/1500 SZM enables simultaneous turning and milling of workpieces with even the most complex geometries, in a single working cycle. The combination of these two processes significantly reduces production costs, as well as overall working time. The machining process is performed by using the state-of-the-art technology available on the market. It includes, among others, two spindles with a labyrinth cooling system. This system was designed for frequent use of high-pressure coolant. It ensures a constant zero-point height throughout the working cycle, regardless of the amount of generated heat. To limit the effect of ...
The machine is in good technical condition, after prior agreement it is possible to test it. Max. turning diameter over the bed 450 mm Max. machining diameter 320 mm Max. machining length 500 mm Distance between centers approx. 640 mm X-axis travel 160 mm Z-axis travel 540 mm Spindle bore diameter 65 mm Spindle taper CM4 Max. spindle speed 4,000 rpm Main motor power approx. 15 kW Turret head 8–12 tools Tool clamping type VDI Control system FANUC 18T (most common) Tailstock Usually no Bar feeder No Machine dimensions (L × W × H) approx. 3,650 × 1,200 × 1,980 mm Weight approx. 4,800 kg Power supply 400 V / 50 Hz
The machine is in good technical condition, testing is possible after prior agreement. The machine was installed in 07/2023 and was used very little. The machine was switched on for 3900 hours, of which 540 hours the spindle was running. Swing diameter over bed mm 750 MACHINE SPECIFICATIONS STYLE 750 Machine STYLE 750 Swing diameter over bed mm 750 Swing diameter over slide mm 530 Distance between centers mm 4000 Bed width mm 450 Maximum load between centers kg 1800 Maximum load in combination with fixed steady rest (type U) kg 2500 Main spindle Main motor power (S6) kW 26 Maximum spindle speed (number of gears) rpm 2000 (3) Spindle bore mm Ø105 Spindle taper A2-11 X and Z axis X axis ball screw Ø mm 32 Z axis ball screw Ø mm 50 Rapid traverse m/min 8. Feed range mm/min 0.01-2000 Tailstock Ø quill mm 125 Quill stroke mm 225 Quill taper MT 6 General Weight kg 8150 Machine color Frame ...
Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
turning diameter: 800 mm turning length: 4000 mm control: cnc total power requirement: kW weight of the machine ca.: 7,3 t dimensions of the machine ca.: 6,6x2,2x2 m Brand: Phoenix Type: FL 8040 CNC IT Year of make: 2001 Distance between centers: 4.000 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 510 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 250 mm ø Steady rest: 350 mm ø 3-Jaw chuck: 630 mm ø Machine dimensions (lxwxh): 6.500 x 2.200 x 2.000 mm Machine weight: 7.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. All this is complemented by an advanced SIEMENS CNC controller with many useful functions. The DURMA TP9 CNC punching ma ...
The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of ...
AVIA FNE 50N CNC milling machine was built in 2016 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine, designed for precision machining of workpieces with a maximum weight of 500 kg, is an excellent choice for any industrial plant. This is all due to its reliable spindle, which can work both vertically and horizontally, with the same specifications. The AVIA FNE 50N is controlled by an advanced HEIDENHAIN control system, which is distinguished by its intuitive operation and numerous useful functions. The FNE 50N toolroom milling machine weighs 3000 kg. Technical specifications of the AVIA FNE 50N CNC milling machine General data - feed in the X/Y/Z axis: 800/500/420 mm - feed in the X,Y,Z axis: 5-2000 mm/min - rapid traverse in the X/Y/Z axis: 10/10/7 m/min - maximum workpiece weight: 500 kg - spindle rotational speed: 50-4000 rpm - spindle rotational speed adju ...
CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.
IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...
CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn
DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...
Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control
ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area ...
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...
FINN-POWER X5 turret punch press was built in 2006 in Finland by Finn-Power OY (now PRIMA INDUSTRIE S.p.A.). The machine is used for precision machining of sheet metal with a maximum thickness of 8 mm. The machining process is performed fully automatically by means of a reliable workhead, operating with a maximum force of 25 tonnes. Together with the head, a 20-station turret cooperates which enables a large number of tools of all sizes and types to be stored. The material feed, in turn, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. All this is complemented by equipment, consisting of, among others, light curtains and tools. Thanks to all of this, the offered FINN POWER X5 CNC punching machine is the best choice for companies that place emphasis on the high quality of manufactured parts. The to ...
NAKAMURA WT 250 CNC Fanuc, Series 16i-T Main spindle, counter spindle 1 tool turret with driven tool stations + 1x Y-axis 1 tool turret with driven tool stations 2x C-axis Conveyor Bar loading magazine IEMCA TS560P The machine is energized in our warehouse in Gussago BS.
First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green ...
Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...
85 ton x 2700mm 5 Axis back gauge Laser guards With Tooling
KIMLA BPF 2030 CNC router was built in 2011 in Poland by POLCOM Przemysław Kimla. The machine was regularly maintained throughout its service life. In 2021, the ISEL 10 bearings along with the lead screw in the Z axis were replaced. KIMLA BPF 2030 is an excellent choice for both small and medium-sized companies with a diverse production profile. The machine enables precise machining of a wide range of materials, i.e. light metals, plastics and wood. After fitting a special cutting head, it is also possible to cut parts made of rubber and cardboard. All machining processes are performed on a large work table with an ergonomic design. The spindle, driven by a high-powered motor, rotates at a maximum speed of 24000 rpm and moves in three X,Y,Z axes with feeds of 2000 mm, 3000 mm and 500 mm respectively. Tools taken from a 10-position magazine are in turn continuously measured and calibr ...
x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height ...
Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
Key data: 130 mm, 160 mm, 6000 1/min
CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production ...
Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -Tool holder: 27 mm -Number: 9 recordings -Price: per piece -Dimensions: 73/67/H197 mm -Weight: 4.7 kg
turning diameter: 520 mm turning length: 1500 mm control: Fagor total power requirement: 15 kW weight of the machine ca.: ca. 3,5 t dimensions of the machine ca.: L/B/H 3,50x1,50x180 m more info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fiber Laser Machine HLF1530 8KW - IMMEDIATELY AVAILABLE high-quality equipment Laser power: 8kW - VA up to 20mm, FE up to 30mm Sheet size: 3000 x 1500mm Equipment: Precitec Auto Focus Procutter Cutting Head IPG resonator with 8kW incl. German ! On-site warranty THK Guided Tours fast, automatic changing table Sheet metal layer detection automatic nozzle cleaning Siemens touchscreen control with LAN/USB Siemens Drives CE safety by TÜV Süd Sick light barriers around the changing table Will include: Warranty CAD CAM Software Commissioning Delivery within Germany Training offered We have been servicing YAWEI machines for the European market for more than 15 years. We are your service partner for all questions. You can test an identical machine at any time with us under power. Come and visit us !
TOP CONDITION - OVERHAULED IN 2022 ! - 1 year warranty Year of construction: 2007 Panel format: 3000 x 1500 x 100mm Power: 4000W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. quick puncture incl. ball roller table incl. 4-fold head change magazine incl. 2 cutting heads incl. 10-fold automatic nozzle changer FE: up to 24mm VA: up to 15mm oxide-free designed for high-pressure cutting up to 20bar no foundation needed ! Optional automatic loading and unloading by Mazak CELL510 can be offered with warranty / commissioning / training Always regularly serviced
CNC lathe, brand Spinner, TypeTC67H-MC, YEAR 1999 with chip conveyor, underlays, various tools. The price is net.
NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck
MAZAK SUPER TURBO X48 MK II laser was built in 2001 in Japan. The compact laser cutting machine is designed for precise cutting of pre-programmed shapes in sheet metal made of structural steel, stainless steel and aluminium. The machine’s small dimensions and components integrated into the machine frame, such as the chip conveyor and the MAZATROL L32B CNC control, allow it to be used to its full potential both in small factories and in series production. The MAZAK ST-X 48 MKII gas cutting machine can process sheets with a maximum thickness of 15 mm (S235 structural steel), 6 mm (stainless steel) and 3 mm (aluminium). High cutting speed as well as excellent machining quality and accuracy over the entire working area at low operating costs are achieved thanks to the YB-L150A 8M resonator, characterised by high energy efficiency, allowing the laser beam power to be adjusted in the rang ...
1250 x 1250 with reposition 27 station with 3 index - Very good condition
CNC control, control panel, LCD, keyboard, touchscreens -electronic handwheel -Manufacturer: NEC -Type: NL10276AC30-03L -Type: 150PW072-C -Dimensions: 400/645/H485 mm -Weight: 22 kg
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6035 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable th ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-C2 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construct ...
CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded cons ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...
First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition
maximum number of results exceeded
please refine your search
