127,738 used machines on RESALE, but how to find them? Machine Search
CK 50 CNC turning center was built in 2022. This state-of-the-art, extremely efficient machine is used in both unit and series production. Workpieces with a maximum diameter of 570 mm and a length of 500 mm are machined by means of a reliable spindle and cutting tools taken from a 12-position turret. The spindle, driven by a high-powered motor reaches a speed of 4200 rpm and moves in two X,Z axes with feeds of 270 mm and 610 mm respectively. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the turning process. The CNC CK50 lathe has an inclined bed, which increases the stability of the design through better distribution of loads during machining. This solution reduces the risk of vibration and oscillation, thus increasing turning accuracy and giving the ability to perform more complex operations. It also makes it easier to evacuate the ...
Used machine Machine Type: CNC Turning Center Model: CLX 750 V3 Manufacturer: DMGMORI Control: SLIMllne® Multi-Touch Control Siemens Year of Make: 2021 Location: Germany #001273 Turning diameter max. approx. 700 mm Turning diameter standard approx. 610 mm Chuck size approx. 400 mm Turning length approx. 1,300mm Rod diameter max. approx. 127 mm Turret stations approx. 12 X-axis approx. 435 mm Z-axis approx. 1,300 mm Tailstock approx. 1,200 mm Spindle speed max. approx. 2,000 rpm Speed AGW max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Compressed air bar,L/min approx. 5, 100 bar,L/min Machine weight approx. 10,200 kg Facilities - Main spindle A2-11" with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 3-jaw chuck 300mm - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI ...
Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...
Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...
From now on we can arrange the following services for you! ✔ CAD/CAM programming Experts support you in programming your components – from the simple 2D contour to complex 5-axis simultaneous machining. We work with market-leading CAD/CAM systems and optimize your programs for maximum efficiency. ✔ Cost-per-part calculation We analyze your components with regard to cost-effectiveness. Together we determine your unit costs and help you to make optimal use of the machine and processes. ✔ Feasibility studies Before purchasing, we check the technical feasibility of your applications. How to get Certainty that the machine meets your requirements and that your production is sustainable supported. ✔ Programming Training Our training courses are aimed at beginners as well as advanced learners and are individually tailored to Adapted to your requirements. How to en ...
Used machine Universal Machining Center Machine type: DMG DMF 360 / 11 linear Control: Heidenhain TNC 640 Celos Year of Make: 2017 TECHNICAL DATA: Travels: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Dynamic Pack for DMF 360 linear (Y1100) Rapid traverse: (X/Y/Z) [m/min.] 80 / 60 / 60 Speed range: [1/min.] 20 - 15,000 Drive power: [kW] 46 / 30 Tool holder: SK 40 Tool Changer Tool positions: 60 NC rotary table Table size: [mm] 3,200 x 1,100 Max. table load: [kg] 1,200 Features: Internal cooling (IKZ): [bar] 40 Coolant tank: [l] 600 Chip conveyor Chip rinsing gun Oil mist extraction Air through spindle center Probe Spindle Preparation for use 3D quickSet Automatic doors Electronic handwheel This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Machine type: CNC turning and milling center Model: CTXalpha 500 V6 Manufacturer: DMGMORI Control: Celos with Siemens 840D si First commissioning: 2022 #001272 Technical data Turning diameter max. approx. 240mm Turning diameter standard approx. 200mm Chuck size approx. 210mm Turning length approx. 480mm Rod diameter max. approx. 52/option65mm Turret Stations 12 X-axis approx. 210mm Z-axis approx. 525mm Spindle speed 1/2 approx. 5000/6000 rpm Speed AGW max. approx. 5000U/ Rapid traverse X/Z/Y 30/30/22.5 • Main spindle 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle 6000 Ulmin • Hydraulic 3-jaw chuck 170mm • 12 station turret VDI 30 Trifix • Tool drive for all stations • C-axis • Y-axis • Alternating speed • Coolant supply through the sub-spindle • Swivelling tool presetter • Coolant spray gun, 5bar • CTXalpha ...
Used machine Machine Type: CNC Machining Center Vertical Model: NVX5100 2nd with Matris robot cell Manufacturer: DMGMORI Control:DMG MORI Celos Year of construction / Ib: 2019 / 2022 #001312 Technical data Travel range X-axis approx. 1050 mm Y-axis approx. 530 mm Z-axis approx. 510 mm Table size approx. 1,350x600 mm Workpiece weight max. approx. 1,200 kg Speed max. approx. 12,000 rpm Spindle motor approx. 37/22 KW Number of tool positions approx. 30 Rapid traverse approx. 30 m/min Mounting cone approx. BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 45 kVA Footprint L x W x H approx. 3.1 x 2.85 x 2.6 m (without chip conveyor, without robot) Machine weight approx. 7,300 kg Main Drive with Higher Torque - Tool Holder Cone for BT-40 Tool Holder - Tool magazine with 30 places (#40) - Door for tool magazine - Hinged belt conveyor ...
Used machine Machine Type: CNC Machining Center Vertical Model No.: CMX1100V Manufacturer: DMGMORI Control:DMG MORI SLIMline® Multi-Touch Heidenhain Year of Make: 2022 #001358 Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for tightening bolts DIN 69872 - Direct position measuring system X-Y-Z - Magazine with 30 tool positions - Coolant supply through spindle (IS) bar 20 - Double switching filter - Coolant-blown air switching externally via M-function - Chip conveyor (scraper belt, left side) - Tank capacity left side chip conveyor 250 - Coolant spray gun for chip removal - Automatic cab roof - Signal light - Electronic handwheel - Button kit spindle and table Traversing range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Footprint L x ...
Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
Used machine Vertical machining center Machine type: DMG DMC 635 V/P Control: Heidenhain iTNC 530 Year of Make: 2013 TECHNICAL DATA: Travels: X-axis: [mm] 635 Y-axis: [mm] 510 Z-axis: [mm] 460 Speed range: [1/min.] 10,000 Tool holder: SK 40 Tool Changer Tool positions: 30 Pallet system Number of pallets: 2 Table size: [mm] 560 x 790 Features: No internal cooling (IKZ) Electronic handwheel Probe TS649 Tool breakage detection table switches Chip rinsing gun This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.
spindle passage: 80 mm max. turning diameter: 395 mm Max. Turning length: 750 mm control: System TX 8H max. Spindle speed: 3.150 U/min. CNC lathe | TRAUB - TNA 400 The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle passage: 80 mm max. turning diameter: 460 mm Max. Turning length: 1.000 mm control: System TX 8F max. Spindle speed: 2.800 U/min. CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing possible after prior agreement. Max. rotating diameter 480 mm (approx. to the current design of the workpiece removal blade) Max. machined diameter 340 mm Max. turning length 785 mm Collet + 10 hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) hydraulic through-cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 end, bore dia. 80 mm, integrated motor Speed range 45 - 5,000 min-1 Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001 increment Secondary spindle Speed range 50 - 6,000 min-1 Power/continuous operation 11 kW/7.5 kW Spindle with end dia. 14O mm, bore dia. 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) hydraulic thr ...
A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.
turning length: 2000 mm greates pass round over bed: 630 mm swing diameter over slide rest: 350 mm control: Monforts Control System K bed width: 550 mm turning speed range: 2 - 1800 U/min spindle diameter in front bearing: 120 mm spindle head DIN 55027 - Size: 8 tool taper: RD2 PARAT quill stroke: 210 mm spindle bore: 71 mm total power requirement: 30 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.
turning diameter: 1800 mm turning length: 600 mm control: Siemens 6 - Jaw Chuck: ? spindle bore: 130 mm spindle nose: DIN 55027 Größe 11 turning speed range: 1 - 400 U/min max. torque on the spindle: 9000 total power requirement: 38 / 52 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 6x3x2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 376 mm turning length: 1245 mm control: FANUC i-Series turning diameter over bed: 376 mm x-travel: 230 mm z - travel: 1350 mm rapid travel x/y/z: 24/30 m/min main spindle speeds:: 2800 spindle motor: 35 / 26 kW max. torque on the spindle: 1613 Nm spindle passage: 102 mm total power requirement: 33,91 Kva weight of the machine ca.: 7 t dimensions of the machine ca.: 4,6 x 2,11 x 2,3 m Equipped with: - Fanuc i-Series CNC control - C-axis - 3-jaw chuck, 304 mm diameter - 12-station tool turret - Tailstock - Chip conveyor - CE Only 2,300 spindle hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 5 t, 350 mm, 310 mm
Small Electric Table Press Brake with Spindle Drive TableOne 5 - CoastOne Made in Finland Press force: 5T Bending Length: 350mm Spindles: 1x5T Control: TC15-2D Graphics Back gauge: 1 axis controlled X axis - R axis manual Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; Available now! Viewing under power possible at any time by appointment!
The machine is in good technical condition, after prior agreement it is possible to test it. Control unit Hurco Max Turning diameter 254 mm Turning length 340 mm Range over bed 405 mm Range over cross feed 230 mm Length between centers 403 mm Bar capacity 45 mm X-axis movement 177 mm Z-axis movement 355 mm Spindle speed 6000 rpm. Motor power 11 kW
Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993
Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.
Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.
The machine is in good technical condition, testing is possible by prior arrangement.
Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.
CNC turning and milling center MacTurn 30 Control: OSP-U100L Year of Make: 2001 Internal machine no. 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Circumferential diameter over bed: 500mm Circumferential diameter over face slide: 500 mm Tool holder: SK 40 Tool positions: 60 places Travels: X-axis: 430 mm Y-axis: 190(+/-95) mm Z-axis:1,090 mm C-axis: 0.001° - Three-jaw chuck SMW Autoblok - Tailstock programmable - Chip conveyors - Paper belt filter system with high-pressure pump - Oil mist extraction - Touchsetter - One Touch IGF - Door Automatic - Large baking package - Large tool package
CNC vertical machining center Type: U 630 T Manufacturer: Hermle Year: 2001 Control: Heidenhain TNC 426 X: 630 mm Y: 500 mm Z: 500 mm Max spindle speed: 7000 rpm Spindle motor: 7,5 kW Spindle taper: ISO 40 Table: 900 x 528 mm Max table load: 400 kg Machine weight: 4800 kg Tool probe: Heidenhain TS 220 Documentation Machine in good condition, fully functional, under power. Find more here - / Contact us at -
number of spindles: 8 spindle passage: 36 mm turning length: 250 mm spindle bearing diameter: 358,2 mm bar material dia.: 36 mm bar length: 4000 mm longitudinal slide -travel: 145 / 250 mm cross slide - travel: 80 mm spindle turning speed - stepless: 560 - 4000 U/min spindle motor: 28 kW Total weight, approx.: 8500 kg dimensions of the machine ca.: 5850 x 1900 x 2580 mmxmmxmm - Beckhoff CNC control system (Win2000) - IEMCA 4m bar feeder (PRA52/P-Typ42) + Hydraulic catch chute + Mechanical end-piece chute with container + Parts conveyor belt + 3–4 bar oil connection + 100 bar high-pressure connection + 1 HYDAC hydraulic oil cooler + 1 oil cooler for cutting oil + 1 chip conveyor + 1 magnetic roller for sludge removal + 1 new air conditioning unit for control cabinet / year of manufacture 2025 + Feed block: new brass strips fitted in 2023, making the machine as good as new + Spindle coup ...
A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.
turning diameter: 320 mm turning length: 600 mm control: Fanuc Oi-TD spindle bore diameter: 74 mm number of controlled axis: 2 turning speed range: 3000 U/min rapid speed: 20 m/min number of tapers in turret head: 12 direkt tail stock: Ja power requirement: 15 kW weight: 5,0 t dimensions: 3,7 x 1,6 x 2,0 m Used CNC- Lahte 2 axis - 3 jaw chuck Ø 250 mm - chip conveyor - oil dust collector - Tool presetter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm table-size: 900 x 530 mm control: Heidenhain TNC 355 tool adaptor: ISO 40 | | turning speed range: 40- 4000 U/min rapid speed: 5 / 6 m/min feed speeds: 2 - 3000 | mm/min | power requirement: 6 kW table load: 350 kg dimensions: 2,6 x 1,8 x 2,2 m weight: 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.
turning diameter: 280 mm turning length: 400 mm control: Fanuc 18 T spindle bore diameter: 51 mm number of controlled axis: 2 turning speed range: 0 - 4000 U/min rapid speed: 30 m/min number of tapers in turret head: 12 VDI 40 tail stock: Ja dimensions: 3,9 x 1,6 x 2,1 m weight: 4,0 t weight of the machine ca.: 3,9 t power requirement: 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm - chip conveyor - oil dust collector The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad ...
Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible.
faceplate diameter: 4000 mm swing diameter: 4200 mm turning height: 2000 mm workpiece weight: 50000 kg cross travel of ram-slide: 2300 mm slides vertical travel: 1250 mm swival range +/-: -15/+30 Grad faceplate turning speed range: 0,5 - 55 U/min Control: Fagor 8055i CNC total power requirement: 182 kW weight of the machine ca.: 134 t dimensions of the machine ca.: 5920 x 10200 x 8400 mm Machine overhauled in 2008 - CNC Control FAGOR 8055i - Tool C8 - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 9029 Type: TURN E65 Producer: EMCO Created: 2008 Parameters: Control system: FANUC Max. turning diameter: 500 mm Maximum turning diameter over bed: 610 mm Maximum length of travel in the X-axis: 210 mm Maximum length of travel in the Y-axis: 40 mm Maximum feed in the Z-axis: 610 mm Weight: 6500 kg
An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026.
Inv. Num. : 9030 Type: EM80 Producer: ADIGE Created: 2015 Parameters: Control system: SIEMENS Switch-on hours: 37558 h Hours: 26407 h Machine weight: 8500 kg The machine is designed to process steel tubes with a length of 20–600 mm and a diameter of 20–80 mm.
pressure: 80.0 t chamfer lenght: 2570 mm distance between columns: 2125 mm column arm: 420 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm dayligth: 470 mm table height: 960 mm Number of working hours: ~ 33.100 h oil volume: 90.0 l total power requirement: 9.0 KW weight of the machine ca.: 5750 kg. range L-W-H: 3630 x 2450 x 2550 mm Equipment: - AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - ...
Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma
max. bar Ø: 42 mm Max. speed: 4,500 1/min 8-station turret of which 4 are powered Travel X= 110, Y= 50 mm 2. 8-station turret of which 4 are powered Speed driven tools: 6,000 1/min 1 longitudinal carriage 1 vertical slide Pick-up spindle Chip conveyor IEMCA BOSS 545 Bar Feeder Weight 4100 kg
turning diameter: 720 mm turning length: 3000 mm control: Siemens 805 turning diameter over slide: 430 mm turning speeds: 1800 U/min tailstock quill taper MT: 6 steady: 3 Stück main drive motor: 36 kW z-axis: 3050 mm x-axis: 410 mm swing diameter over slide rest: 430 mm spindle motor: 28 kW workpiece weight: 3000 kg spindle passage: 106 mm 3-jaw-chuck diameter: 305 mm chip conveyor: faceplate: mm total power requirement: . kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines ...
A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.
Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg
maximum number of results exceeded
please refine your search
