cnc router used for sale

Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020

- Producer Venjakob - Type VEN SPRAY DUO/C CNC 6000 - Year of construction 2004 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Diameter exhaust air pipe 500 mm - Exhaust air 10.000 m³/h - Transport belttransport System - Feed speed adjustable ~ 2 - 7,5 m/min - Belt cleaning system - Belt cleaning system with v-belt - Lacquer reclaiming system with v-belt - Gun control touch screen CNC 6000 - Number of installed lacquer circles 2 Stk. - quick change system for spraying guns - Supply air box - Suitably for water based lacquer - Suitably for solvent based lacquer - Switch cabinet built into the machine - Total connection power ~ 29 - Voltage / HZ 400 / 50 - Colour 7035 - Location, on stock - Voltage fluctuation max. +/- 5 %

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. There is a complete manual in Czech and German. We also have a probe and accessories (vices, clamps, collets, mandrels, etc.)

This 3-axis QUICK CNC UE-481PL was manufactured in 2025. It features a robust heavy-duty base, a large working area of 2100 x 3050 x 200 mm, and a 9 kW HSD milling spindle capable of 24,000 rpm. Additional highlights include a 12-fold linear changer, dual 250 m3/h Becker vacuum pumps, and a wireless control panel. If you are looking to get high-quality CNC machining capabilities, consider the QUICK CNC UE-481PL machine we have for sale. Contact us for more information.

Key data: 28 t, 1000 mm

Hydr. CNC Press Brake BOSCHERT Type Profi 28 CNC with various bending tools Weight approx. 3000 kg

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, its ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine.

The machine is in good technical condition, after prior agreement it is possible to test it. It was put into operation in 2012 with the HEIDENHAIN iTNC 530 control system, including a chip conveyor and a cutter head (8 positions). The machine is fully functional and runs without complications, serviced regularly, originally directly by the KOVOSVIT company and after its demise by the VOPSS company.

- CNC wireless remote control - Zero-3 / 5-channel stepper motor drive - Base frame (movable on wheels) - Dell PC (with monitor, keyboard, and mouse) - WinPC-NC USB software (Version 2.50) - Accessories

CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.

Inv. Num. : 8995 Type: Masturn MT 550i CNC Producer: Kovosvit Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Max. turning length: 1500 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum spindle speed: 3000 1/min Spindle bore: 82 mm Weight: 3400 kg Equipment: Chip conveyor Cutter head (8 positions)

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG MORI CMX70U 3+2 Control: Heidenhain TNC 620 Year of Make: 2021 #001350 Optimal area of application. Bearing seats on long shafts, crankshaft bearing seats, balancer shafts, etc. TECHNICAL DATA: Max. turning length: [mm] 1,055 Turning diameter: [mm] 120 Max. Rotary Ø over bed: [mm] 285 Rapid traverse: (X/Z) [m/min] 20 Main spindle Max. speed: [1/min.] 3,500 Drive power: [kW] 7.5 / 5.5 Bar Passage: [mm] 43 Spindle Nose: A2-6 Number of turrets: 2 Tool positions: 6 + 6 Tool holder: Capto Tailstock This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

STUDER Favorit CNC grinding machine

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

CNC punching machine manufactured in 2001. This Pullmax 6000 features a maximum sheet size of 3000 × 1500 mm and a maximum punching force of 300 kN. It has a tool capacity of 15 positions and a maximum tool diameter of 76.2 mm. If you are looking to get high-quality punching capabilities, consider the Pullmax 6000 machine we have for sale. Contact us for further details.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain TNC 530 Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In good condition, fully functional Find more here - / Contact us at -

turning diameter: 315 mm turning length: 1000 mm control: Siemens type: Sinumerik 802 D turning diameter over slide: 160 mm spindle hollow: 52 mm Tool changer: 12 turning speeds: 30-3300 U/min chip conveyor: total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Machine has been overhauled Die techn. Daten sind Hersteller- bzw. Betreiberangaben und daher für uns unverbindlich. Einen Zwischenverkauf behalten wir uns vor, es gelten ausschließlich unsere Geschäfts- und Verkaufsbedingungen. Über uns mehr als 400 eigene Maschinen im Lager über 15.000 m² Lagerfläche, Krankapazität 70 t mehr als 10.000 Artikel Zubehör für Ihre Werkstatt Sie wollen Maschinen Produktionslinien oder Ihren Betrieb verkaufen, dann sprechen Sie uns an. Weitere Angebote finden Sie auf unserer Webseite. Besichtigungen sind nach Absprache möglich. Wir freuen uns auf Ihre ...

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

Key data: 4200 mm, 2300 mm, 1250 mm

Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.

Used industrial machine offered by IBEXTRA.

Reversible clamping device, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, dividing head, rotary indexing table, rotary coupling -Manufacturer: NIKKEN Rotary table with drive -Type: CNC-100 -Recording: SK40 -Clamping: pneumatic -Control: Z3BF UNIT -Tailstock: 2 pieces type P-105 -Dimensions of transport trolley: 600/940/H720 mm -Weight: 119 kg

used 5-axis CNC machining centre, the CHIRON FZ 08 S, manufactured in 1998, is for sale. | Technical specifications: | Machine type: 5-axis CNC machining centre / vertical machining centre | CNC control: FANUC 21i-M, depending on model | Travel ranges: | X-axis: approx. 300-350 mm | Y-axis: 250 mm | Z-axis: 250 mm | A-axis: 360° for corresponding 5-axis/rotary axis models. | B-axis / swivel axis: -20° / +110°. | Table size / clamping surface: 550 x 300 mm, | Max. workpiece weight: approx. 50 kg in some market specifications. | Tool magazine: 12 tools | Spindle mount: HSK-A 40 | Spindle speed: up to 10,000 (15,000) rpm | Spindle motor power: 3.7 kW | Machine weight: 1,820 kg | Dimensions: 2,050 x 2,250 x 1,900 mm | The machine can be viewed by appointment. | We reserve the right to make changes and corrections to the technical data and specifications, and to sell the item in the meanti ...

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...