134,657 used machines on RESALE, but how to find them? Machine Search
swing diameter: 560 mm turning length: 800 mm control: C200-4D Siemens 840 D Main spindle:: spindle head: 8 DIN 55026/55021 ISO 7027/1 bar capacity: 90 mm spindle diameter in front bearing: 140 mm turning speed range - spindle: ~ 3.500 U/min drive capacity - spindle motor: 100% / 40%: 43 / 57 kW Torque: 275 / 363 Nm Indexing: 2,5 ° C-Axis: 0,001 ° turret:: Number of Turrets: 1 number of toolpositions: 12 pos. Spindle speed - driven tool stations: ~ 6.000 min -1 power capacity - driven tool-stations: 11 kW tool taper: 40 x 63 mm DIN 69880 Torque: 21,5 Nm travel -x axis: 300 mm travel -z axis: 800 mm rapid traverse: X/Z: 30 / 22,5 m/min feed power: X: 7.200 N feed power: Z: 9.000 N Tailstock:: dia. of quill: 65 mm Cone: SK 30 longitudinal travel: 800 mm rapid traverse: 10 m/min total power requirement: 51 kVA weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 7,3 x 4,0 ...
turning length: 4.500 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 17 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2985x2160x2000 mm Weight: 2000 kg Total power requirement: 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 2650x1400x1700 mm Weight: 1950 kg total power requirement: 11,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 960x900x1460 mm Weight: 200 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 312x410x739 mm Weight: 90 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 960x900x1460 mm Weight: 100 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8900x3700x2500 mm Weight: 8300 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4000 mm, 12000 mm, 12000 W
4000 x 2000mm 12000w
Key data: 340 mm, 2000 mm
Emco Emcomat E-300 2-Axis Teach-In/Cycle-Controlled CNC Lathe CNC control Fagor 8055 i Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2,500 rpm X-axis travel 310 mm Travel Z-axis 2000 mm If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 500 mm, 400 mm, 400 mm
DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.
Used CNC valve seat processing machine NEWEN EPOC XL. Working range valve seat diameter 13-240 mm. Valve guide working range 4-20 mm. Max. workpiece weight approx. 900 Kg.
table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...
With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF
2000 Toshiba BTD-200QF CNC Horizontal Boring Mill Spindle Diameter: 4.33" Extended Quill Diameter: 7.87" Taper In Spindle: #50 Vertical Head Travel, Y-Axis: 39.37" Table Cross Travel, X-Axis: 39.37" Spindle Travel, Z-Axis: 15.74" Saddle Travel, W-Axis: 27.55" Table Size, (2) Pallets: 39.37" x 39.37" Table Capacity: 6,000 lbs Table Indexing: 0.001 Degree Rapid Traverse (X,Y,Z Axes): 472.4 IPM Feed Rates: .04-236.2 IPM Table Load Capacity: 6,600 LBS Spindle Speeds (2 Ranges): 20-3000 RPM Floor Space, L x W x H: 173" x 174" X 126" Machine Weight: 39,600 lbs. -EQUIPPED WITH- Tosnuc 888 CNC Controls 40-Station Automatic Tool Changer (2) 39.37" x 39.37" Pallets with Pallet Shuttle System Thru Spindle Coolant Marposs Probing System Chip Conveyor 30 HP Spindle Motor
A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement.
CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic
TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...
CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...
AMADA LC-1212 ALPHA III laser cutting machine was built in 1999 in Japan by AMADA CO., LTD. The machine is used for precision machining of sheet metal with a maximum weight of 220 kg. Laser cutting is performed by means of a stable 2 kW laser beam, which guarantees the achievement of extremely smooth edges with no irregularities. All this is complemented by an advanced NC control and a laser source of the highest energy efficiency. The AMADA LC 1212 A3 laser cutting machine weighs 4500 kg. Technical specifications of the AMADA LC-1212 ALPHA III laser - laser power: 2 kW - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z axis: 1270/1270/300 mm - rapid traverse in the X/Y/Z axis: 80/80/60 m/min - working speed: 20 m/min - maximum sheet metal dimensions (L x W): 2540 x 1270 mm - maximum sheet metal weight: 220 kg - work table height: 820 mm - positioning accuracy: ± 0.01 mm - pos ...
MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...
Key data: 316 mm, 340 mm
CNC LATHE FOR GENERAL PURPOSE TURNING
A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible.
table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...
For sale Emco CNC double spindle lathe type Hyperturn 45. A very complete CNC lathe with left and right spindle, as well as an upper and lower turret. Both turrets have driven tool positions! The upper turret also has a Y-axis with 70 mm travel. Tool holder attachment VDI25, rod capacity left spindle is Ø 45 mm, maximum speed 7,000 rpm. Maximum diameter is Ø 300 mm. Maximum part diameter is 480 mm. The distance between the two spindles is 720 mm. Fanuc 18i-TB control. The machine is equipped with high pressure pump, chip conveyor with right ejection, parts catcher, manual collet devices, etc. Available from stock, subject to prior sale. The machine has a light layer of soot. This can be easily removed.
turning diameter: 400 mm turning length: 1100 mm control: Siemens Sinumerik 840D SL greates pass round over bed: 500 mm Swing dia. over traverse guideway: 370 mm Main spindle:: Max. rpm: 5000 min/-1 power capacity - main spindel: 17 / 25.5 kW max. Torque: 345 Nm spindle diameter in front bearing: 130 mm spindle bore: 67 mm chucking diameter: 325 mm spindle nose: A8 axis stroke:: x-axis: 750 mm y-axis: +/- 100 mm z-axis: 1200 mm feeds:: rapid traverse: 40 / 40 / 40 m/min Tailstock:: tailstock: 1200 mm taper of center: Mk 5 tension force: max. 8 kN milling head: b-axis: +/- 120 ° tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/min spindle motor: 10,5 kW max. torque on the spindle: 90 Nm total power requirement: - kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 4,6 x 2,5 x 2,82 m Equipped with: - Siemens 840D SlimLine / Cel ...
travel -x axis: 900 mm travel -y axis: 200 mm travel -z axis: 800 mm B-axis swival range +/-: +90 / -20 ° positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 480 mm, 2000 mm, 3050 1/min
Stock number: 4009 CNC LATHE Manufacturer: Gildemeister , Type: CTX 600 Machines NO.: 361238, Year of manufacture: 1997 Specifications: Max. circumferential diameter 480 mm dia. Max. turn. About Bed 650 mm Dia. Turning length 2000 mm Main motor power 27 kw Main spindle speed range 4-3050 rpm Tool turret with 12 stations Powered stations revolver 1 6 pieces. Control Gildemaister EPL Fabr. Accessories: Hydr. Chuck main spindle 400 mm dia Tool holder vdi 50 Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 15 Chip conveyance. Cooling water system. Length: 4000 mm, Height: 2100 mm, Width: 2500 mm, Weight: 9100 kg
Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement.
Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.
Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices
maximum number of results exceeded
please refine your search
