cnc rotary table used for sale

Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale

75,0 kW, max. 8,50 bar, 12,28 m3/min. With built-in frequency inverter. Volume flow 2,89 - 12,28 m3/min.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.

Workspace tip height 102 mm centre distance - with normal headstock with 450 mm - reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm spindle poles spindle nose for collets type Schaublin W25 spindle bore 25 mm collets passage 20 mm reduction ratio of 1:5 Raedergetriebes cheek height x width x length 168 x 130 x 1000 mm cheek from cast iron, trapezoidal profile as lathe 102 N and dovetail, hardened and ground. Sledge greatest way on the cheek width 400 mm runner - length 90 mm top runner above 80 194 mm way manual adjustment 20 mm shank of tools 12 x 12 mm cross slide width length 94 300 mm way manual adjustment 100 mm bed slide length of leadership on the cheek 250 mm screw lead screw for longitudinal turning and threading, Ø 40 mm screw hardened, Ground thread, slope 4 mm speed range RPM 270 3000 rpm turning 0.02 0.3 mm / Rev. Tapping largest slope  ...

75,0 kW, max. 7,50 bar, 13,80 m3/min. Condition like new.

132,0 kW, max. 9,0 bar, 22,90 m3/min. With energy recovery. Condition like new.

160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.

315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.

160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled

75,0 kW, max. 7,50 bar, 12,90 m3/min.

132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled

160 kW, max. 10 bar, 25,10 m3/min.

75 kW, max. 10 bar, 11 m3/min. 2 pieces available.

90 kW, max. 8 bar, 14,98 m3/min.

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

160 kW, max. 7,5 bar, 26,88 m3/min.

75 kW, max. 8,60 bar, 11,20 m3/min. Oil-free, air cooled.

110,0 kW, max. 3,50 bar, 23,22 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132,0 kW, max. 3,50 bar, 24,30 m3/min. Oil-free, water cooled. Air end (screw) has 18000 working hours.

132,0 kW, max. 2,20 bar, 43,02 m3/min. Oil-free, air cooled. 2 pieces available.

200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.

75,0 kW, max. 10 bar, 12,44 m3/min. With built-in compressed air dryer.

75,0 kW, max. 7,50 bar, 13,80 m3/min.

Material: steel Engine: 7,5 kW Weight: 8500 kg Length x Width x Height: 7500 mm x 2000 mm x 3000 mm With working platform Turning pipe: 44 U/min Length 5950 mm, diameter 1700 mm; two draft. Very good condition, overhauled. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

200 kW, max. 8.50 cash, 36.80 m3 / min.

Rotary screw air compressor Kaeser ESD 351 200 kW, max. 8.50 bar, 36.80 m3/min.

50,0 kW, max. 13,0 bar, 7,90 m3/min. With built-in frequency inverter. Volume flow 5,93 - 7,9 m3/min.

160 kW, max. 7,5 bar, 27,80 m3/min oil-free, water cooled. Air ends have 32000 working hours.

250 kW, max. 10 bar, 37,60 m3/min, oil-free, water cooled.

250 kW, max. 10.50 bar, 34,86 m3/min. Oil-free. LP and HP air ends are new Mk2 version and have 13000 working hours.

90 kW, max. 8,35 bar, 13,20 m3/min. Oil-free, water cooled, with built-in adsorption dryer IMD 260. Excellent condition.

45,0 kW, max. 10,0 bar, 6,10 m3/min. With frequency inverter. Volume flow 1,5 - 6,1 m3/min. New air end in 2008 at 51000 working hours.

315 kW, max. 12,0 bar, 46,40 m3/min. Condition like new.

55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.

55 kW, max. 10 bar, 7,80 m3/min.

Kat. No. 12-1170 in a very good condition Measurements and weight: LxBxH: 140 x 64 x 117 cm weight: 160 kg type: SRZ4 / 055LD Serial No. 279503 4,4 kW DN 65 130 l/min., 7800 l/h 7,5 bar For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1165 in very good condition Measurements and Weight: LxWxH: 136 x 44 x 113 cm Weight: 125 kg 3 kW 60 l/min., 3600 l/h 2 bar DN 65 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

160 kW, max. 8,5 bar, 30,60 m3/min. New air end in 2007 and has 26000 working hours.

450,0 kW, max. 7,5 bar, 68,64 m3/min. Oil-free, water cooled, with soft start, new motor in 2009, service records available.

50,0 kW, max. 7,61 bar, 8,60 m3/min. Oil-free. Air cooled. Variable speed drive. Volume flow 2,6 - 7,6 m3/min.

The rotary piston blower is general-outdated. of the blowers is also to be had with impulse.

Rotary screw air compressor Atlas Copco ZR 110 oil-free 110 kW, 7,5 bar, 18,6 m3/min.

Rotary screw air compressor Kaeser 250 kW, 7,5 bar, 46,10 m3/min.

Rotary screw air compressor Atlas Copco GA 315 VSD FF 290kW, 9,95 bar, 50,50 m3/min. Variable speed drive. With built-in compressed air refrigerant dryer. Volume flow 12,4 - 50,5 m3/min. at 7 bar

Rotary screw air compressor Atlas Copco GA 200 FF 200 kw, 7,25 bar, 36,10 m3/min. with built-in compressed air refrigerant dryer

Rotary screw air compressor Atlas Copco ZR 450, oil-free 7,5 bar, 75,30 m3/min water cooled