cnc punching used for sale

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production

OKUMA LB15 – CNC Lathe Highlights • Model OKUMA LB15 • Tool turret with 12 tool positions Technical data • Turning length max.: approx. 500 mm • Turning diameter max.: approx. 250 mm • Tool positions: 12 • Machine dimensions: approx. 2600 x 3600 x 1800 mm • Machine weight: approx. 5000 kg • Nominal voltage: 380 V • Phases: 3 • Frequency: 50 Hz • Power consumption max.: 21 kVA Equipment • Tool turret • CNC control • Protective cladding • Chip conveyor Note • Loading must be carried out by the buyer

CNC lathe Type: T-7 Manufacturer: Leadwell Year: 2006 Control: Fanuc Oi-TC with 8.4” LCD Max. machining diameter: 350 mm Max. machining length: 550 mm Max. bar diameter: 65 mm Chuck size: 210 mm Spindle speed: 4500 rpm Spindle taper: A6 Number of tool positions: 12 Max. tool holder diameter: 40 mm Spindle motor power: 15 / 18.5 kW Machine weight: 4600 kg Central lubrication system Hydraulic tailstock Chip conveyor Electrical cabinet cooling Collet clamping 3-jaw chuck Ø 210 mm Jaw clamping pressure control via M-code Hard jaws – set, soft jaws –set Coolant system 4 bar Bar feeder preparation Oil mist extraction Absolent year 2023 - extraction performance = 1,000 m3/hour. Machine in good condition, fully functional, under power Find more here - / Contact us at -

CNC lathe Type: GLS-200 Manufacturer: Goodway Year: 2016 Control: Fanuc Oi - TF Hours: 4851 Max. swing diameter: 500 mm Swivel seat diameter: 310 mm Max. turning diameter: 360 mm Max. turning length: 500 mm Max. load capacity: 85 kg HOWA chuck size: 8" Rod diameter: 65 mm Hole through spindle: 76 mm Spindle bearing diameter: 110 mm Spindle: A2-6 Spindle speed: 45 - 4500 rpm X: 1210 mm Z: 520 mm Turret: 12 positions Tailstock Bar feeder Tool probe Scoop for removing workpiece Machine weight: 3,200 kg Dimensions: 2432 x 1643 x 1727 mm Machine in good condition, fully functional, under power Find more here - / Contact us at -

A CNC coordinate measuring machine Zeiss calibrated at the end of 2025 is available. Measuring dimensions X/Y/Z: 1200mm/1800mm/1000mm, max. workpiece weight: 2000kg, length measurement deviation: 2µm/L300, resolution: 0.2µm, measuring rate: 200/s, max. stylus length: 800mm, max. probe mass: 600g, measuring head: VAST Gold Scanning. Machine dimensions X/Y/Z: approx. 3000mm/2050mm/3550mm, weight: approx. 6000kg. Without grid plate, probe rack, software license and computer. Documentation available. An on-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

The machine is in good technical condition, after prior agreement it is possible to test it. with a bar seller, 65 mm draw tube passage, Sauter revolver, driven tools, hydraulic tailstock, it is after GO, new draw cylinder for clamping tools, still connected in operation, including draw tube inserts, tool holder, etc.,

Used lathe with numerical control HEIDENHEIM PLUS Basic parameters: Diameter: 490 mm, Length 1000 mm Max. diameter over cross slide 280 mm Bed width: 350 mm Spindle bore 65 mm Main motor 12/16 kW Max. speed 2500 /min Feed range 0.01 - 3 mm/rev. Quill stroke 160 mm Quill bore 70 mm Dimensions 2800 x 1800 x 1400 mm Weight 3.2 tons

Key data: 350 mm, 650 mm, 3500 1/min

CNC Teach-in Lathe COLCHESTER Alpha 1350 XT CNC FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 42 mm Rotation max: 3500 RPM Turret: 8 tools Year of construction: 2006 Working hours: 174 working hours only MACHINE IN VERY GOOD CONDITION