We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,582 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work
used
With the universal hole punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work.
used
Hole punch (punch) Northern precision punching NPR-55 Hole punch (knuckle punch) -Punching of sheet metal and plastics. -Aluminium, bronze, copper, 2 mm steel sheets -Simple solution of punching - punching with punch and die stamp round D = 10 mm can be replaced individually on request
used
used
offer consists of: Horizon HP-20A punch unit - features: press- and punch - numbers of holes: max. 4 holes; min. 2 holes - punch hole position: max. 14mm; min. 9mm - punch hole diameter: 6mm - size: max. 350x500mm; min. 120x90mm - punch thickness: max. 3,2mm - speed: max/hr. 4050 Broschüren/h - power: 230V / 50Hz - 260W - dimensions: 590x760x1035mm - weight: 200kg; very good
used
Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price
used
Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
used
Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t
used
used
used
M.- No. : 827
used
Equipment: 5 Sledge units 1 Two-point excenter press 70 kN working range: Drahstaerke range: max. 3.0 mm width: max. 40 mm feed load: max. 170 mm power: max. 250 rpm; ready to use
used
Max punching force: 750 kN stroke over foot switch With range of tools as desired
used
Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.
used
Manufacturer / Origin: Bacher / Germany (EU)
used
Punching and forming center in chain with an assembly line for the production of relays, see pictures
used
Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm
used
Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.
used
new
Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw
new
pressure: 110 t : Ø 40x20 mm throat: 500 mm engine output: 9 kW no. of strokes: 28 Hub/min stroke max.: 80 mm weight: 3150 kg Accessories / equipment: - punching table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
M. No.: 4028/20 Equipment / Additional information: G2.090.9041/03
used
1 LABEL DIE CUTTING MACHINE PMC MODEL F -Year of manufacture 1990 -Four-sided guiding system jogs and holds the stacks on all four sides during the die cutting operation for precise die cutting. -Full control of stacks through feeding, guiding and die cutting eliminates manual jogging. -Convenient adjustment of guides and die with clear view of die register on labels speeds set-up and reduces waste. -Labels are safely loaded outside die cutting area. -Typical uses: labels, note pads, credit cards, identification tags, postal cards, game cards, 3-way trim, round cornering. -Materials: paper, plastic, vinyl, Mylar, paperboard Specifications Model F: Maximum Pre-cut Size 184mm x 184mm(7.25” x 7.25”) Minimum Pre-cut Size 32mm x 32mm(1.25” x 1.25”) Maximum Die Cut Size 178mm x 178mm(7” x 7”) Minimum Die Cut Size 25mm x 25mm(1” x 1”) Recommended Tri ...
used
Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.
used
Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices
new
Universal - NPR-55U Stanze Knee lever punch -Punching of paper, cardboard and plastics. -for simple stamping -The cutting blades can be recorded from the shaft -The cutting blades can be created also not attached just under the pressure plate. -The pictured tools are not part of the offer.
used
Handle hole punch (bags) -Knuckle punch with punch and die for 20 x 90 mm handle hole -Suitable for bags or paper bags
used
MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351
used
Hydropneumatic functioning Punching power: 50 kN Height: 140 mm
used
Technical data: -maximum cutting force 300 kN -maximum punching diameter up to 88.9 mm -Max that material thickness 6.35 mm -Work area without putting up 1000 x 2000 mm -Actual workspace 1145 x 2100 mm -Work area normally with putting 1000 x 4000 mm -Size work table 1000 x 3500 mm -maximum working speeds of the axes 50 m / min -Max stroke sequence. 320 strokes/min -2 collets min. / max. distance 160-1900 mm -Need for compressed air 6 bar -Power supply 400 V / 15 kW -Space B 4200 x T H 3800 x 2250 mm -Weight approx. 6500 kg -with:-tool station 360-degree rotatable programmable 0.01 ° -CNC control - div. accessories in the separate tool Cabinet
used
Format: A3 // Paper format: ca 31x45cm
used
Register punch ingestion in RG; Knife 90'new ground; Length of format min. 80 mm, max. 340 mm; format width min. 125 mm, max. 350 mm; max. insert height at the table 40 mm; max. cutting height per punch depending on paper quality approx. 8 mm; tee finger for cutting the layers after the cutting process; Machine is serviced and tested by the Infusion Customer Service; other tools on request. Register punch infusion RG; knife 90'new sharpened; min.lenght 80mm, max.340mm; width min.125mm, max.350mm; hight max.40mm; max.cut hight8mm; checked by the support of Tränklein germany; other tools on request.
used
a good blanking press Krupp Model PEKRD 250h, 250 tons, year 1980/2005, overhauled 2005, with infinitely variable drive system and Siemens S7 controls, feed system for material 0.5-6 mm, 500mm wide. With decoiler 6 tons. Built as a double-sided C-frame press so that in- and outfeed front-to-back is possible
used
Alu window profiles Punching tool for end hole ventilation 4 stations
used
M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz
used
Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.
used
For punching out packing material (paper and cardboard) Various die-cutting stencils for chocolate bars and chocolates Produced at Hamburg. (cost approx. 300€) Good condition, still in use Y/O'A 1991 From Germany
used
Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.
used
Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg
used
Punching nibbling machine
used
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
used
Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.
used
Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table
used
Trapeze Punch / Croissant Fritsch Bakery Machines -Built in 2007 -Type trapezoid 270/50x90 6R
used
recently refurbished by Bobst, more details on request
used
Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.
used
Universal punch pots usM 900; good condition; cleaned and tested; 2x punching head; Table size 900x600mm; Max. Insert height 80mm. Universal punch potions USM 900; good condition; cleaned and checked; two heads; table size 900x600mm; max.pile hight 80mm.
used
Inv. Num. : 5451 Type: 1250 F1 Producer: SIMASV Created: 2011 Parameters: Compressive force: 30 t Maximum sheet thickness: 6.3 mm Maximum punching speed: 450 1/min Punching diameter: 89 mm Machine height: 2400 mm Machine length: 4200 mm Machine width: 3700 mm Machine weight: 5500 kg