127,375 used machines on RESALE, but how to find them? Machine Search
For heavy or tähe products, Trough size 840 x 520 x 450mm deep, Full capacity 160L, usable capacity approx. 100-120kg per product, Stainless steel clad, double-walled for heating/cooling, Mixed elements of normal steel, side walls of normal steel, with stainless steel lid with counterweights and limit switch, converted to pneumatic tilting, with control cabinet, and built-in timer: 1 to 7 minutes. Dimensions: 2.2 x 1.2 x 1.4m high (with control cabinet 1.9m high) Weight approx. 1.200kg
Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
Homogenizer LAB 12.50H, SN.1-84.195 Flow Rate 100 l/h at max. 600 bar Single-stage homogenizing valve with manual adjustment poppet valves, Main motor 2.2 kW, 400V, 50Hz
Tool drawer cabinet Manufacturer Lista Width 100 cm Depth 80cm Height 100cm 9 drawers, of which 6 with full pull-out Very good condition according to photos Other cabinets also with smaller dimensions in stock!
LIUGONG - Mini Excavator 9027 F - Price on request -
Hydraulic wood splitter, functional Details on request
Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.
Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compact pretzel roll with croissant wrapper and feeding device Universum Kasper Model: LWT 3/80 Premium EB II W 20 for all spears such as Kornspitz and pretzel sticks, etc. Universal - Combi - Winding Machine for all doughs for wrapping and long rolls Longitudinal knit width 800 mm Cleaning device of the lower knitting plate Total effective path over 2 levels 2.5m Dough insert of 40 - 300 grams Stainless steel with EB2 feeding device pre-rolling mill for roll lines with transverse discharge only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 2200 x 1000 x 1800 mm, WxDxH Used machine overhauled 3 Months Warranty + Spare Parts Service Option: Mehler Service Package Maintenance contract Instruction & Commissioning We have more TOP winding machines in stock!
Sägeblatt-Ø: 315 mm cutting diameter: 90 mm sawblade width: 2,5 mm capacity 90 degrees: round: 90 mm capacity 90 degrees: flat: 120 x 70 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: flat: 80 x 70 mm turning speeds: 52 -104 U/min voltage: 400 V frequency: 50 Hz power capacity: 1,32 -1,9 kW weight of the machine ca.: 220 Kg range L-W-H: 0,7 x 0,6 x 1,3, m • mitre possibility by adjustment of the sawhead, • self-scrolled vise, self-ajdustable protection cover, • cooling pump with bin, • 2 steps of cutting speed • with under frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 35,950 mm Number of fields / row of shelves: 09 pcs á 3,900 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 36x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 72x Safety pin, used Material colour: sendzimir galvanised For securing the longitudin ...
Key data: 16 KW, 20 kVA, 230 V
Made in the EU 30 months warranty Stamford Alternator ComAp Control Module Power Generator Specifications: Model No.: EQ-P2016 Prime Rating: 20 kVA / 16 kW Standby Rating: 22 kVA / 17.6 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 404A-22G1 Bore x Stroke (mm): 88 x 110 Displacement (L): 2,216 Compression Ratio: 23.3:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1600 mm Width: 650 mm Height: 1250 mm Weight open: 560 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically paint-co ...
x-travel: 2500 mm y-travel: 1000 mm z-travel: 1000 mm Control: Heidenhain table surface area: 2600x800 mm turning speeds: 2100 U/min spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: . mm grinding width: . mm workpiece height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
closing pressure: 4360 kN table-size: 730 x 730 mm control: B+R Industrieelektronik draw back pressure: 190 kN ajustment speed: max. 60 mm/sec return speed: max. 90 mm/sec daylight between the columns: 900 mm = vulcanizing press with vertical closing unit, with form removal and form separation device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. wheel diameter: 650 mm gear width: 200 mm max. module: 10 min. module: 1 work accuracy: DIN 6 clamping table diameter: 710 mm table bore diameter: 150 mm number of strokes - stepless: 35,5 - 560 c/min max. ram stroke: 230 mm feeds: 3,55 - 40 mm/min radial feed: 0,8 - 9 mm/min work-spindle diameter: 110 mm total power requirement: 28,2 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 3,8 x 2,3 x 2,5 m Gear shaping machine for the production of spur gears, for Internal and external gears - Built under licence from LORENZ and identical in construction to LORENZ LS 630 complete Modernisation + overhaul in 2012 with: - new painting - new electrical system from Telemecanique - Counter Holder - Chip conveyor - Coolant unit - change gears Not used in production again after overhaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t stroke: 300 mm Cylinder: 205 MM distance between table / ram: 520 mm table surface area: 1100X350 mm ram surface: 350X350 mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
