cnc milling used for sale

WYPALARKA PLAZMOWA MODEL MTX 2000/4000 Konstrukcja: stal+aluminium Wymiary całkowite: 4600/2700/1400 Pole robocze: 4200/2200/1400 Napęd osi XY obustronny napęd bramy: silniki krokowe 4Nm z przełożeniami, listwy zębate klasa dokładności 8 Napęd osi Z: silnik krokowy śruba kulowa Prędkość przejazdowa: do 25m/min Układ kontroli osi Z: THC My plasm system Układ kolizyjny, zabezpieczający palnik przed uszkodzeniem Prowadnice liniowe: TBI Automatyczny układ wykrywania materiału Zasilanie: 240V Dopuszczalne obciążenie: 1700kg Masa całkowita: 1200kg netto W ZESTAWIE: - pulpit sterujący -stół wodny -ruszt wymienny -program sterujący w języku niemieckim, angielskim, polskim -deklaracja zgodności CE - DTR - gwarancja Możliwość dobrania odpowiedniej przecinarki Hypertherm PowerMax 45A, 65A, 85A,105, 125A, Max Pro 200 do indywidualnych pot ...

PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor Travel speed: up to 25m/min Z-axis control system: THC My plasm system Collision system, protecting the burner against damage Linear guides: TBI Automatic material detection system Power supply: 240V Payload: 1700kg Total weight: 1200kg net INCLUDED: - Hypertherm 65A source - control panel -water table -interchangeable grate -control program in German, English, Polish -CE declaration of conformity -DTR -warranty Choose the right Hypertherm cutter for your individual business needs.

CNC PLASMA BURNER ProMax Professional Series TECHNICAL PARAMETERS working width from 1500 to 4000 mm working length from 3000 to 12000 mm travel speed up to 80 m/min max cutting thickness of plasma sheet up to 50 mm gas up to 150 mm KEY EQUIPMENT VEICHI servo drives X-axis support with double rails quick START - preparing machines for cutting less than 1 minute nesting ProNest LT- a program for decomposing material into sheet metal planetary gears helical oblique slats in class 6 touch screen with industrial computer remote control sectional extraction table with pneumatic actuators CS anti-collision system - a system protecting the burner against collision Central lubrication CLS double Y-axis basing laser marker indicating the position of the burner SC system - security system

PLASMA PLOTTER MODEL MTX 2000/6000 Construction: steel+aluminium Working field: 6200/2200/1400 XY axis drive double-sided gate drive: 4Nm stepper motors with ratios, gear strips accuracy class 8 Z-axis drive: ball screw stepper motor double aluminum beam with a special cross-section ensures rigidity, service life Travel speed: up to 25m/min Z-axis control system: THC My plasm system Linear guides: TBI, Automatic material detection system Power supply: 240V Permissible load: 3000kg Total weight: 2500kg USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC Cutting Height Control System Rope guides TBI Double-sided gate drive: X-axis stepper motor and gear strips accuracy class 8 Y-axis stepper motor and gear strips accuracy class 8 Z-axis stepper motor and ball screw Drives implemented with TBI 20 ra ...

Condition: Brand New, tested but never used. Well-packaged. Includes: - ELITE Series Foreman (48 x48 Cut Area) - Spindle Mount Size 80mm - Stiffy Included - Onefinity 3-Axis XYZ Touch Probe - Dust Collection Kit ELITE Series The Jenny Infinite Possibilities set Makita Router Installation support will be offered via video call.

Machine dimensions: 2900 x 1200 x 2000 mm Press dimensions: 2000 x 500 mm Press thickness: 20 – 350 mm Electric power: 14Kw/h, 40A Voltage frequency: 400V / 50Hz / 3P + N + PE Pressing power: 3200kg Production capacity: 1000 – 3000 m² per day Weight: 1000kg Mold weight: 100kg Emergency stop button: Yes

turning diameter: 400 mm turning length: 1500 mm control: Mazak Fusion 640 MT Mazak motor: 200 V turning diameter over bed slide: 390 turning diameter over bed: 610 mm total power requirement: 48 kW weight of the machine ca.: 9650 Kg dimensions of the machine ca.: 5,4x2x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Plasma Cutter, Plasma Cutting System, Portable Plasma THC, Large Format portable plasma cutting system / oxyfuel cutting machine large format Working area 3000x1500mm without plasma cutter With height compensation THC Software StarCAM Machine Voltage Signal phas 220V ,50HZ Plasma power Voltage 380V 3 Phase,50HZ Cutting mode Plasma+Flame Effective cutting range(mm) 1500mm×3000mm Cutting speed(mm/min) 50-3500mm/min Rotational Speed 0-5000mm/min Plasma cutting thickness According to models Moving precision ±0.2mm/m Cutting system Fangling F2100B THC Fangling F1620 Software StarCAM Total weight(kg) 150kg Emergency stop Yes Working temperature -5~45°C Relative humidity

Inv. Num. : 7153 Type: CXK-32BX Producer: Bluetooth CNC Generated: Parameters: Maximum turning length: 150 mm Max. turning diameter: 12 mm Maximum spindle speed: 3000 1/min

CARTER CNC 4.2 M double mitre saw built in 2021 is ideal for high-volume production that requires precise cutting of workpieces with a maximum length of 4200 mm. The machining of workpieces at 90° and 45° is performed with the utmost precision and accuracy using high-quality discs driven by powerful electric motors. The machine has been used very little to date – it has only been in operation for 1 hour a day. Technical specifications of the CARTER CNC 4.2 M sawing machine - controller: SIEMENS - machinable materials: aluminium, PVC - maximum workpiece length: 4200 mm (possibility to cut oversized workpieces with a length of 7 m) - cutting angle: 45°; 90° - HMI panel: SIEMENS SMART LINE TOUCH - power supply: 380 V; 50 Hz - dimensions of the machine (L x W x H): 4600 x 900 x 1600 mm

Fiber Laser welder 1 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported.

Fiber Laser welder 1,5 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Manual laser welding devices with optical fiber laser emitters are the latest development in the field of welding technologies, which replaced argon arc welding. They are used for welding such metals as stainless steel, iron, aluminum and other metals.

Fiber Laser welder 3 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 ℃  ...

Fiber Laser welder 2 kW with cutting and cleaning functions ADLCW 3 in 1 - Factory new - 3 working modes - Welding | Cleaning | Cutting - Warranty period - 1 year - Service - Technical support, possible even after warranty service The price is shown without VAT. Creates smooth joints that achieve strength basic material. ADLCW machine with stable performance that allows their use even under specific conditions. The machine is easy to operate and do not take up much space and can be easily transported. Laser wavelength - 1064 ~ 1080 nm Pulse frequency - 5000~10000 Hz Cooling method - Water cooling (Chiller) Laser type - Fiber Laser generator - Raycus Guidance and positioning system - Red Point Temperature of the cooling water - 5-45℃ Length of the output fiber - 5/10/15m (optional) Processing width (for cleaning) - 10-80 mm Working temperature - 0-40 � ...

For fast and high-quality cutting of metal without processing after cutting, you need a fiber laser machine. Fiber lasers are currently the last word of science and technology not only in the field of metal processing, but also the brightest achievement in modern laser physics and fiber optics. Fiber laser emitters have a number of advantages compared to traditional lasers: • effective heat removal; • high quality of output radiation; • stability and reliability of the laser, and as a result – an order of magnitude longer working time; • pumping efficiency; • compactness and light weight ADLT 1530 fiber laser is equipped with Raycus|Maxphotonics sources of the following capacities 1000W | 1.5 kW | 2kW | 3kW | 4kW | 6kW | 8kW | 10kW | 12kW| Application materials: Metal: carbon steel, stainless steel, durairon, titanide, galvanized, aluminum, copper.

CNC fiber laser machine for cutting pipes and tubes of round, square and complex cross-sections and cutting holes in them of various shapes. ADRT 0262 is equipped with Raycus sources of the following capacities of 500 W; 750 W; 1000 W; 1500 W; 2000 W; 3000 W; 4000 W; 6000 W; 8000 W; 10000 W; 12000 W. • Processing length – 6200 mm • Laser source – Raycus • Type of cooling – S&A” chiller • Laser head – Raytools (Swiss) • Accuracy of repeated positioning - ≤ 0.05 mm • Supply voltage – 380 V • Servo motors, 750W • Gearbox type - Planetary • Square linear guides on all HIWIN axes • Feed mechanism - polished helical rack along the Y axis, along the Z and X axes - SHP • WEIHONG (Autonomous rack) • Automatic pipe support • Autofocusing of the laser head • Centralized system of automatic lubrication of moving m ...

For fast and high-quality cutting of metal without processing after cutting, you need a fiber laser machine. Fiber lasers are currently the last word of science and technology not only in the field of metal processing, but also the brightest achievement in modern laser physics and fiber optics. Fiber laser emitters have a number of advantages compared to traditional lasers: • effective heat removal; • high quality of output radiation; • stability and reliability of the laser, and as a result – an order of magnitude longer working time; • pumping efficiency; • compactness and light weight ADLT 1530T fiber laser is equipped with Raycus|Maxphotonics sources of the following capacities 1000W | 1.5 kW | 2kW | 3kW | 4kW | 6kW | 8kW | 10kW | 12kW| Application materials: Metal: carbon steel, stainless steel, durairon, titanide, galvanized, aluminum, copper.

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

ANAYAK PERFORMER 2000 CNC milling machine built in 2007 in Spain, uses a torsion milling head with automatic positioning in the A+B planes for precision machining of larger workpieces, weighing up to 5000 kg. The machining process is carried out on an easily accessible work table of the milling machine, with dimensions (L x W) of 2200 x 850 mm, in X,Y,Z axes with feed rates of 2000 (X axis), 1000 (Y axis) and 1000 (Z axis). The CNC bed milling machine has a highly efficient spindle with two-stage speed adjustment from 60 to 3000 rpm, ensuring a significant reduction in milling time. The machine also features, among others, a control panel with HEIDENHAIN iTNC 530 CNC control, cooling through spindle and RENISHAW RMP60 workpiece probe. The CNC bed type milling machine weighs 14000 kg. Technical parameters of the ANAYAK PERFORMER 2000 machining centre - work table area (L x W): 2200 ...

CNC Vertical Milling Machine Make: JAFO Model: FYN 50 NB X-axis: 800 mm Y-axis: 500 mm Z-axis: 500 mm Year of construction: 1988 Controls: Heidenhain Operating voltage 380 V Control voltage: 24 V Total power consumption: 10 KW Weight 4,000 kg The track-controlled JAFO - FYN 50 NB NC vertical milling machine is designed for milling work on parts weighing up to 700 kg, including the clamping device. Consoles with table are equipped with a hydraulic counterweight. The well-sized guideways for the console on the stand chest and the guideways of the table are hardened. All counter guides are covered with "TURCITE" plastic and always remain in contact with the corresponding guides along their entire length. (no overflow). The vertical milling spindle, which can be swivelled in one plane, is attached to the transversely adjustable crossbeam. The milling spindle is driven by a t ...

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. CNC gantry milling machine characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindl ...

SERON 1315 EXPERT CNC milling machine built in Poland in 2017 is new and has never been used. The machine designed and manufactured with attention to the smallest details, is used for precision machining of a wide range of materials such as mild metals, plastics, carbon, wood, wood-like panels and glass. All vibrations and deformations during the milling process are eliminated by the high-quality ribbed steel construction with a T-slot table made of aluminium profiles, with a length of 1500 mm and a width of 1300 mm. The workspace is additionally equipped with a special PVC overlay to protect the table cover while cutting the workpieces through. At the end of the table there is a six-position linear magazine with an automatic tool correction sensor. The 1315 EXPERT machine axes are driven by highly dynamic and precise brushless AC servo drives with back pressure, equipped with serv ...

HAAS TM-1P CNC vertical machining center was manufactured in 2014 in the United States. This extremely easy-to-use machine with extensive machining capabilities ensures efficient and precise machining of workpieces over its entire lifetime. The machining process is performed on a stable work table using reliable components in the form of cutting tools and a high-speed spindle. In addition, each tool is continuously measured by an extremely accurate RENISHAW measuring probe to ensure that the process runs continuously and without any interruptions. All machining parameters are programmed in the intuitive HAAS CNC control. The perfectly optimised controller allows for the creation of advanced machining programmes in just a few steps, without knowledge of G-codes. The HAAS TM1P CNC machining center is also offered with optional equipment which includes, among others, milling heads, colle ...

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

DUGARD EAGLE 660 VMC CNC machining centre built in 2007 in Taiwan, is used for precision milling, drilling, threading, boring and reaming of workpieces with rotary tools. The machine, with its extensive machining capabilities, is distinguished by its extremely stable base, which provides rigidity and support for the guideways on which the X,Y,Z axes are guided. To ensure a high level of safety, specially designed sliding guards protect the operator from moving parts, coolant and workpiece fragments. All the processes, from tool selection to the machining cycle, are performed fully automatically by the milling centre. The implemented SIEMENS SINUMERIK 810 D CNC control minimises the operator’s handling of the machine, while the capacious 24-position magazine selects the shortest possible access path to the tool. This solution increases production efficiency while significantly reduci ...

OKUMA GENOS M460R-VE CNC machining center was built in 2016 in Taiwan. This technologically advanced machine was designed with the goal of providing its user high reliability as well as extreme precision, while its extensive machining capabilities will significantly improve any manufacturing process. One of the many innovative technologies incorporated into the machine is the Machining Navi M-g technology, which computes the most favourable machining parameters for a given job based on an analysis of the acoustic spectrum. The system also levels the vibrations and oscillations that occur at the contact between the tools and the workpiece, resulting in better workpiece surface quality, longer cutting tools life and low load on the main spindle. In addition, despite the most demanding machining operations, the OKUMA GENOS M460R-VE CNC vertical machining center remains very economical ...

Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

MAZAK VTC 20C milling centre was manufactured in 1997 in the UK. The machine designed for precise and dynamic machining of workpieces with a maximum weight of 1000 kg has a high quality steel construction, which ensures rigidity and stability during milling. Inside the milling machine is a large work table with a length of 2000 mm and a width of 510 mm, and a reliable spindle that rotates at a maximum speed of 7000 rpm. The VTC 20 C machining centre processes workpieces in three axes with feeds of 1660 mm (X axis), 510 mm (Y axis) and 510 mm (Z axis). The installed MAZATROL M PLUS CNC control allows full use of all the machine’s capabilities. The VTC 20-C vertical machining centre weighs 7320 kg. Technical data of the MAZAK VTC 20C milling centre - CNC controller: MAZATROL M PLUS - work table dimensions (L x W): 2000 x 510 mm - feed rates in the X/Y/Z axis: 1660/510/510 mm -  ...

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...

CHIRON FZ 18 W MAGNUM HIGH SPEED CNC milling machine was built in 1998 in Germany. The machine, equipped with an intuitive SIEMENS SINUMERIK 810M CNC controller, a powerful high-speed spindle and a 20-position tool head, is used in precision machining of steel and aluminium. The top-quality construction additionally ensures long, trouble-free operation and high stability under even the heaviest loads. This is why the CHIRON FZ 18 WM CNC milling center is the best choice for any industrial facility. The total weight of the machine is 5500 kg. Technical data of the CHIRON FZ 18 W MAGNUM HIGH SPEED CNC machining center - CNC control: SIEMENS SINUMERIK 810M - feed rates in the X/Y/Z axis: 750/400/600 mm - work table dimensions (L x W): 1240 x 850 mm - maximum spindle speed: 10500 rpm - spindle taper: SK40 - 20-position tool head - machining accuracy (spacing): 0.01 mm - machining  ...

FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330  ...

The JAFO FYN 50 ND CNC milling machine was produced by Jarocińska Fabryka Obrabiarek S.A. in 2007. The machine is equipped with the working table of dimensions (W x L) 500 x 1400 mm and CNC control HEIDENHAIN. The numerical control allows to work in an automatic cycle with a circular or linear interpolation in three-dimensional space. Machine feeds in the X/Y/Z axes are 800 mm, 500 mm and 500 mm respectively. The CNC milling machine weighs 4500 kg. A fourth axis can be connected to the machine control panel. Technical specification of the JAFO FYN 50 ND machine - CNC control: HEIDENHAIN - working table surface (W x L): 500 x 1400 mm - feed rates in the X/Y/Z axis: 800/500/500 mm - stepless feed rate adjustment - spindle nose: ISO 50 - stepless regulation of spindle rotation speed - metering lubrication system - guide rails lined with TURCITE B” material - hydromechanical q ...

CNC milling machine KNUTH WF 1 CNC The CNC milling machine of the renowned KNUTH brand, model WF 1 CNC, built in 1992, offers precise milling results and reliable performance. This used machine is ideal for beginners and hobbyists. Specifications: - Table clamping surface: 270 x 700 mm - Table movement longitudinal (X): 300 mm - Table movement vertical (Y): 200 mm - Table movement transverse (Z): 350 mm - Spindle mount horizontal and vertical: ISO 40 - 8 spindle speeds horizontal: 110 - 1230 rpm - 8 spindle speeds vertical: 150 - 1660 rpm - 8 feeds: 26 - 290 mm/min - Rapid traverse: 1100 mm/min - Quill travel: 60 mm - Drive power: 3.7 kW - Dimensions: approx. 1310 x 1380 x 1650 mm - Weight: approx. 1000 kg The machine is in a used condition and in need of repair. It has proven to be extremely reliable and will continue to work reliably for many years to come. With i ...

NOVAR ACTIVE 4000 CNC milling machine built in 2002 in Italy is the perfect choice for even the most intensive production challenges. The machine allows for efficient machining of large-sized workpieces with a maximum weight of 10 tonnes with reliable components in the form of cutting tools and a high-speed spindle. The installed HEIDENHAIN TNC 426M CNC control additionally guarantees seamless operation of the machine and utilisation of its full potential and capabilities. The NOVAR ACTIVE CNC bed milling machine has been continuously serviced and has new bearings on the spindle. The total weight of the machine is 27000 kg. Technical parameters of the NOVAR ACTIVE 4000 milling machine - CNC control: HEIDENHAIN TNC 426M - feeds in the X/Y/Z axis: 3500/1100/1400 mm - rapid traverse in the X/Y/Z axis: 8000/10000/10000 mm/min - work table surface (L x W): 4000 x 1000 mm - maximum wor ...

CNC milling machine 2100x4000mm 9kW HEAVY DUTY TechnologieCNC CNC Industry 2.0 2140 ATC The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. ✔The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 9kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as t-groove slots for manual clamping of irregular shapes. ✔ATC - The machine is equipped with an automatic linear magazine wi ...

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

TechnologieCNC Milling Plotter CNC 1530 INDUSTRY 2.0 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Covscsx ◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of th ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. R9tu9xj Standard equipment ✅ Hybrid table, i.e. vacuum, enabling n ...

AFM Harnaś R 550 E CNC machining centre built by the Polish company AFM ANDRYCHÓW in 2006 is used for precision workpiece machining. The machine used in production facilities, is distinguished by its exceptionally stable construction and reliable high-speed spindle. The offer also includes equipment comprising, among others, a 16-position tool magazine and a convenient to use FANUC Series 0i-MC CNC controller. The Harnaś R-550 E CNC vertical machining centre weighs 3300 kg. Technical data of the AFM Harnaś R 550 E CNC milling machine - work table dimensions (L x W): 360 x 720 mm - feed rates in the X/Y/Z axis: 550/410/510 mm - maximum spindle rotational speed: 8000 rpm - minimum spindle rotational speed: 45 rpm - spindle taper: ISO BT 40 - spindle torque (at nominal rpm): 47.7 Nm - instantaneous spindle torque (at nominal rpm): 70 Nm - T-slot number: 3 - T-slot width: 14  ...