cnc machining centre used for sale

Data erased, screen pixel error-free, without scratches, tested Specifications: Type: Lenovo Think Centre AIO M910z 24\" (61 cm) Display Full HD 1920x1080 Processor: Intel i5-7. Gen 4x3.4 Ghz Year 2019 8 GB RAM DDR4 SSD: 256 GB SSD Opt. Drive: DVD Multi USB 2.0 USB 3.0 RJ-45 (LAN) Headphones/Microphone Auction-ID: A1-50757-180

Data erased, screen pixel error-free, without scratches, tested Specifications: Type: Lenovo Think Centre AIO M910z 24\" (61 cm) Display Full HD 1920x1080 Processor: Intel i5-7. Gen 4x3.4 Ghz Year 2019 8 GB RAM DDR4 SSD: 256 GB SSD Opt. Drive: DVD Multi USB 2.0 USB 3.0 RJ-45 (LAN) Headphones/Microphone Auction-ID: A1-50757-183

Data erased, screen pixel error-free, without scratches, tested Specifications: Type: Lenovo Think Centre AIO M910z 24\" (61 cm) Display Full HD 1920x1080 Processor: Intel i5-7. Gen 4x3.4 Ghz Year 2019 8 GB RAM DDR4 SSD: 256 GB SSD Opt. Drive: DVD Multi USB 2.0 USB 3.0 RJ-45 (LAN) Headphones/Microphone Auction-ID: A1-50757-178

Data erased, screen pixel error-free, without scratches, tested Specifications: Type: Lenovo Think Centre AIO M910z 24\" (61 cm) Display Full HD 1920x1080 Processor: Intel i5-7. Gen 4x3.4 Ghz Year 2019 8 GB RAM DDR4 SSD: 256 GB SSD Opt. Drive: DVD Multi USB 2.0 USB 3.0 RJ-45 (LAN) Headphones/Microphone Auction-ID: A1-50757-185

Data erased, screen pixel error-free, without scratches, tested Specifications: Type: Lenovo Think Centre AIO M910z 24\" (61 cm) Display Full HD 1920x1080 Processor: Intel i5-7. Gen 4x3.4 Ghz Year 2019 8 GB RAM DDR4 SSD: 256 GB SSD Opt. Drive: DVD Multi USB 2.0 USB 3.0 RJ-45 (LAN) Headphones/Microphone Auction-ID: A1-50757-181

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

VERTICAL MACHINING CENTRE Inv. No.13.107M1 Make MAZAK Model VTC-300C Control Mazatrol Fusion 640M X-travel 1740 mm Y-travel 760 mm Z-travel 660 mm Table size 2000 x 760 mm Spindle taper ISO 40 R.P.M. 40 – 12.000 kW 15/11 Volts 400 Cycles 50 Including: Machine cover Manuals Coolant tank Work light Chip conveyor Auction-ID: A1-50718-48

CNC VERTICAL MACHINING CENTRE Inv. No.13.017M1 Make EUMACH Model MC1300P Control Heidenhain 360 Serialnumber E3045 X-travel 1350 mm Y-travel 610 mm Z-travel 610+160 mm Table size 1500 x 700 mm Max loading weight 1500 kg Spindle taper ISO 50 R.P.M. 60 – 4500 Machine weight 9000 kg Dimensions 4400 x 3076 x 3000 mm kW 15 Volts 400 Cycles 50 Including: Automatic lubrication. Telescopic way covers. ATC 32 positions Auction-ID: A1-50718-36

AGATHON 150 SL 2 ist eine Spitzenloseschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Schleift bis Ø 12 mm; Schleifscheibenbreite 50 mm; Hauptscheibe neu Ø 150 mm (Bohrung 50 mm); Regelscheibe neu Ø 100 mm (Bohrung 40 mm). Spindel bis 4.500 t/min; Regelscheibe stufenlos 15–150 t/min; Anschluss 3x380 V 50 Hz; Hauptmotor 2,0 CV; Gewicht ~650 kg; Abmessungen 1200×800×1200 mm. Ausgestattet mit Kühlmitteleinrichtung, Papierfilter, Satz Flansche und Satz Schleifscheiben. Erreicht enge Toleranzen; typisch für Automotive, Uhrenbau, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Ø min/max to be rectified: 1.5 - 75 mm, Peripheral speed of grinding wheel (m/s): 1.700 RPM, Regulating wheel width: 150 mm, No. of regulating wheel speeds: 4, Min/max speed of regulating wheel (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum length to be rectified in plongeé: 150 mm, Grinding wheel head motor power: 15 Cv, Total power: 16,5 Cv, Long: 1.654 mm, Width: 1.500 mm, Tall: 1.535 mm, Weight: 2.200 kg

Lot consisting of 2 large-volume IBC collection stations made of robust PE-LLD for the safe storage and handling of IBC containers or larger liquid containers. The drip trays are designed for industrial use and have a high retention volume as well as integrated holders for internal transport. The lot includes 2 matching raised storage and support frames with grating, one of which is already used in the drip tray in the pictures. The design allows containers to be placed safely above the collection area and at the same time facilitates the inspection and cleaning of the tray. Technical data / equipment: - Number: 2 IBC rescue stations - Material: PE-LLD, chemical-resistant plastic design - Collection volume: approx. 1,100 litres each - Load capacity: max. 2,000 kg each - Year of construction: 2008 - General technical approval: Z-40.22-303 - Integrated forklift and transport mou ...

Manufacturer/ Type: Deckel Maho, DMU 60 P hi-dyn, 5 Axis Milling Machine Year of Make: 2002 Information: Tool changer for 60 SK 40 holders, Mill Plus control, Current condition: The Y axis is out of round by 0.03mm, the machine is not working at the moment because the hard drive has to be replaced Availability: Immediately Accessories: 3D probe, machine manual

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

x-travel: 1.100 mm y-travel: 610 mm z-travel: 610 mm B - axis: -30 / +120 ° C-axis: 360 x 0,001 ° distance spindle /table: 105-715 mm table dimensions: 1100 x 610 mm tool taper: SK40 spindle turning speed - stepless: 14.000 U/min workpiece weight: 500 kg control: iTNC530 total power requirement: kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter - cylindrical/face: 203 mm regulating wheel width: 247 - 330 mm max. width of grinding wheel: 380 - 508 mm control: SIMATIC HMI TP700/KP400 total power requirement: kW weight of the machine ca.: 8,10 t dimensions of the machine ca.: 6,00 x 4,10 x 2,50 m Retrofit in 2015 (Huttelmaier), new in 1964 Dressers for grinding and regulating wheels MPM BM50 automatic balancing system Motorized feed axis Incremental steps: 0.001/ 0.005/ 0.010/ 0.100 mm Infeed conveyor with two-hand operation Frasch FP66N-zw belt conveyor Semotec system for finished parts POLO Filtertechnik unit Extraction system (switchable via auxiliary equipment) Nold Hydraulik und Pneumatik hydraulic power unit Central lubrication system with fill-level indicator Infeed handling system for plunge-grinding operations The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3900 mm, 2750 mm, 350 mm

Manufacturer: HOUFEK Model: Scorpion Year: 2021 Condition: Used Stock number: 9624 Control system: FANUC FS 31i-B5 Operating hours: 18000 h Spindle drive power: 22 kW Speed: 24000 1/min X-axis travel: 3900 mm Y-axis travel: 2750 mm Travel travel Z-axis: 350 mm Cone: HSK A 63 Number of all tools: 60+21pcs Max. workpiece height: 150 mm Repeatability: 0.05 mm 1/2022 Spindle replacement (HITECO › HSD) Equipment: 100× HSK A 63 clamping tapers 2× Becker vacuum pump Vacuum table (8 zones)

VEB Heavy-Duty Industrial Lathe Type: Heavy-duty industrial lathe Manufacturer: VEB Großdrehmaschinenbau \"8. Mai\" (Germany) Year of manufacture: 1993 Distance between centers: 4000 mm Swing over bed: approx. 800 mm Swing over carriage: approx. 500 mm Spindle bore: approx. 80 mm Power supply: 3-phase, 380 V, 60 Hz Control voltage: 220 V Installed power: 13.5 kW Rated current: 28 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-13

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-51153-7

Machine Type: Conventional Engine Lathe Manufacturer: Boehringer Göppingen Brand / Series VDF Made in Germany Auction-ID: A1-51153-5

GRAZIANO SAG210 Centre Lathe Type: Centre lathe Manufacturer: GRAZIANO Model: SAG210 Year of manufacture: 1995 Maximum speed: 1800 rpm Electric connection: 380 V Approx. machine weight: 2850 kg Approx. dimensions (L x W x H): 3200 x 1600 x 1500 mm Swing over bed: 500 mm Swing over carriage: 280 mm Distance between centers: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-31

Graziano SAG180 Lathe Type: Lathe Manufacturer: Graziano Model: SAG180 Year of manufacture: 1987 Turning length: 1500 mm Turning Ø: 450 mm Speed range: up to 1500 rpm Engine power: 7.5 kW Electric connection: 380 V Distance between centers: up to 1500 mm, allowing work on medium-length parts Approx. machine weight: 1700 kg Approx. dimensions (L x W x H): 2800 x 1300 x 1400 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-32

VDF Boehninger 640 Universal Lathe Type: Universal lathe Manufacturer: VDF Type: BOEHRINGER 640 Turning length: 1000 mm Turning Ø: 640 mm Spindle boring Ø: 385 mm Machine weight: 3500 kg Dimensions (L x W x H): approx. 3650 x 1100 x 1300 mm Distance between points: 1500 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-16

Arlo Ø 800 x 3000 mm Distance between centers: 3000 mm Swing over bed: 800 mm Swing over cross-slide: 520 mm Swing in gap: 1000 mm (300 mm length) Diametre of main spindle bore: 100 mm Power on main spindle: 11 kW Number of speeds: 6 > 800 rpm Length: 5225 mm Width : 1480 mm Height: 1650 mm Weight: 5 ton

CNC Universal – Machining Center DECKEL MAHO DMU 40 eVo NEW DMG Design with track control Heidenhain iTNC 530 HSCI Year of Make: 2012 Travel: X 400 Y 400 Z 375 Speed range: 20 – 18,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 30-fold tool changer with double gripper 3 D probe Renishaw PP 60 optical Electronic handwheel Operating mode 4 Heidenhain Table Pushbutton TD 110 ( Length Measurement ) IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Direct displacement measuring system Rinsing gun for chip rinsing Rotoclear Oil mist extraction 3-Piece Height Adjustable Machine Shoes Operating Instructions Signal light 4 colour

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Year of construction 2003 Control Heidenhain iTNC 530 Table size 280mm Table load 200kg A-axis +/- 110 degrees B-axis 360 degrees X-axis displacement 700mm Y-axis displacement 590mm Z-axis displacement 480mm Spindle 15000 rpm Rapid passage 32m / min Automatic tool changer Yes, Big Plus spindle system Number of tools32 Tool length 280 mm Tool diameter 88 mm or 125 mm with adjacent pocket area Tool weight 7 kg Input400 / 3 / 50hz 33kW Equipment gap conveyors, coolant, handwheel, oil cooler Features Fully enclosed guarding Length 4000 mm Width 3000mm Height 3000 mm Net weight actually 9,490 kg. / 9.4 tons.

HURCO VM10 Vertical Machining Centre. Hurco WINMax Control Year of construction: 2010 Manufacturer: Hurco Model: VM10 Control: Hurco WINMAX Spindle Speed: 10000rpm Table size: 762 x 356 mm Tool change capacity: 20 Tool size: DIN40 Traverses XYZ: 560 x 356 x 457mm

FOM INDUSTRIE profile machining center was built in 2009 by F.O.M. INDUSTRIE s.r.l. This machine, designed for precision machining of PVC profiles, is an excellent choice for businesses specialising in the manufacture of windows. It enables, among others, milling, cutting or making ventilation and holes for the handle. Window profiles are machined by means of various types of aggregates. The standard machine in this series has 14 aggregates, however, the machine in our offer has been equipped with additional milling and drilling aggregates and has a total of 18 of them. This solution significantly increases the machining capacity of the machine as well as the overall machining efficiency. The FOM INDUSTRIE PVC profile machining center is also extremely easy to operate. All machining parameters are programmed in the intuitive CNC control with graphic software. Technical specifications  ...

x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 508 mm z-travel: 460 mm size of pallet: 1240 x 550 mm numbers of pallets: 2 workpiece weight: 800 kg spindle taper ISO: 40 spindle motor: 5,5 kW turning speed range: 28 - 4000 U/min no. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 4,50 x 3,00 x 2,65 m acc.: chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool, facing and boring head -Manufacturer: Schmid, facing and boring head type -Recording: MK4 -Dimensions: 222/87/80 mm -Weight: 3.1 kg

machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm -Weight: 38 kg

Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...

BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm table surface area: 1250 x 700 mm NC-rotary table: integriert, 700 mmø spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min control: HEIDENHAIN control: TNC 430 feeds x/y/z -stepless: 20 - 15.000 mm/min rapid traverse: 30 m/min ATC: 32 (2 x 16) Pos tool diameter: 80 / 130 mm workpiece length: 315 mm weight of tools max.: 8 kg NC-rotary table - speed -: max. 15 U/min table load: 600 / 500 kg total power requirement: 60 kW weight of the machine ca.: 9,6 t = 5-axis machining center, table clamping surface 1250 x 700 mm with integrated NC-rotary table (=4th axis), movement of milling head via control (=5th axis) Accessories: electron. handwheel, chip conveyor (snailconveyor), coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

vertical machining center, year 2013, 23434 operating hours, CNC i SERIES. Used machine. More info & price on IndustrialBuyer.

ELUMATEC SBZ 140 profile machining center was manufactured in 2010 in Germany by elumatec AG. The machine is designed for the economical machining of aluminium profiles and thin-walled steel profiles with a maximum length of 7600 mm. It enables precise milling, drilling and threading of workpieces with high repeatability. With its capabilities, the ELUMATEC SBZ 140 is ideal for use in plants involved in, amongst others, the production of aluminium joinery and steel structures. The SBZ 140 profile machining centre is distinguished by its 4-axis machining unit, equipped with a high-performance, air-cooled milling spindle. It enables all machining operations to be performed at various angles within a range of -90° to +90°. The machining unit cooperates with an 8-position tool magazine, which automatically exchanges tools in accordance with the programmed sequence. The workpiece is held ...

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.