cnc machine center used for sale

Grinding length: 650mm, center height: 125mm, grinding wheel dimensions X/Y/Z: 406mm/60mm/127mm, peripheral speed: 45m/s, spindle power: 4kW, travel X/Z: 210mm/810mm, feed rate: 8m/min, table swivel: 8°, speed: 5000rpm, tool spindle head swivel: -30°/90°. Machine dimensions X/Y/Z: approx. 3600mm/2850mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik. The X-axis spindle and the scale were renewed. Including Movomatic measuring system and accessories. Documentation available. On-site inspection is possible.

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

grinding diameter max.: mm regulating wheel width: mm max. width of grinding wheel: mm Control: SIEMENS 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Manufacturer: Priess und Horstmann, Type: BAT-RTW-CNC, Year: 2003, Control: NST Panel PC W2k, Software: Ferro CAN Bus, Online connection: möglich, Machining stations: 4, Work piece width min-max mm: 130 - 600, Work piece length min-max mm: 290 - 1.300, Work piece thickness min-max mm: 16 - 25, 3 axis control: yes, Destacking unit: yes, Robot charging: yes, Beschickungsband: yes, Vertical drilling station from below: 2, Belt bores: yes, Drill and set buffer: yes, Grip holes: yes, Special bore area: yes, Automatic setting up: yes, Fitting station: yes, Transmission station: yes, Hordenwagen Aufstapelstation: yes, Automatic feed of the: yes, Line boring units pcs: 2, Line screw running units: yes, Year :2003

Inv. Num. : 9056 Type: SPRY 40 CNC-D Producer: ZPS Created: 1994, GO 2016 Parameters: Control system: Siemens Sinumeric 840D Maximum turning length: 300 mm Max. turning diameter: 110 mm Maximum main spindle power: 10 kW Spindle bore: 50 mm Max. rod diameter: 40 mm Weight: 2400 kg Equipment: Duplomatic tool head with rotary tools 3 meter pole holder

Fanuc 6-assig robotfreescentrum voor aluminium en staal Fanuc R-2000-B/165F CNC: R-30iA CONTROLLER X-beweging van de robot op de rails: 10.500 mm Uitgeschoven robotarmbereik (links en rechts): 3045 mm gt; Maximale werkstuklengte indien het een profiel betreft: 15 meter gt; Maximale werkstukafmetingen zonder uitgeschoven arm: 10.500 x 3045 mm gt; maximale werkstukhoogte: 3500 mm gt; Maximaal gewicht dat aan de robot kan worden bevestigd: 165 kg Gewicht van alleen de robot: 1200 kg Gereedschapswisselaar gemonteerd op rails met 13 gereedschapsposities: - 12 live tools - 1 meetsonde Freeskop: TMA6 17/2 Snelheid: 1 gt; 12.000 tpm ISO 40 - 11 kW Gewicht: 45 kg Technische kenmerken: • Automatische gereedschapswisseling (ATC). • Geïntegreerde thermische beveiligingssensor (motoruitschakeling bij 90 °C). • Pneumatisch gereedschapsklemsysteem (enkelwerkende cilinder met veerretour): – Ci ...

Center height: 150mm, center distance: 800mm, max. grinding length: 400mm, table dimensions X/Y: 1245mm/200mm, grinding spindle diameter: 80mm, grinding spindle length: 400mm, workpiece carrier: ISO50, spindle speed: 8000rpm. Documentation available. An on-site inspection is possible.

Coming for sale : TOS Hol Monta UB85/6000 CNC , 2014 Under power less used and very good condition

A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.

Key data: 7200 mm, 4100 mm, 1250 mm

Control Heidenhain ... TNC7 Clamping table surface ... 6000x2900mm Axis X ... 7200mm Stand passage ... 3200mm Axis Y ... 4100mm Axis Z ... 1250mm Axis W ... 1600 mm Spindle speed... 0-3000 rpm. Max. table load ... 20 000kg The machine has undergone a complete overhaul. More info on request, new Fermat headstock new UHAmi 30 milling head CE new electrics and hydraulics new HH TNC 7 controller new digital display HH New linear guide new ball screws cooling New tool changer device

Key data: 4000 mm, 2700 mm, 1250 mm

Control Heidenhain ... TNC 640 Clamping pond area ... 4000x2000mm Axis X ... 4000mm Stand passage ... 2500mm Passage between the table and the crossbeam... 1890mm Axis Y ... 2700mm Axis Z ... 1250mm Spindle speed... 0-5500 rpm. Max. table load... 15 000kg The machine is after the general overhaul. More info on request. new Fermat headstock new electrics and hydraulics new digital display HH New linear guide new ball screws cooling CE Options: Tool changer setup Swivel Heads

Key data: 4200 mm, 2300 mm, 1250 mm

Control Siemens ... Sinumerik 840 D Clamping table surface ... 1600x4000mm Axis X ... 4200mm Stand passage... 2100mm Max. table load ... 10 000kg Axis Y ... 2300mm Axis Z ... 1250mm Spindle mount... ISO 50 Spindle speed ... 40-6000 rpm Max. spindle torque ... 1050/1435Nm Rapid traverse ... 10m/min Main engine power ... 30/41kW Total power requirement ... 79kVA Machine weight ... 51000kg L x W x H ... 10480 x 5200 x 6120mm Incl. milling heads - C50 and N75 The machine is in good condition, possible to test under power.

Control Siemens ... Sinumerik 840D Sl Clamping table surface ... Diameter 1200mm Axis X ... 2200mm Stand passage... 2125mm Axis Y ... 2425mm Axis Z ... 1000mm Max.table load ... 6000kg Rapid traverse ... X,Y,Z 15 000m/min Total power requirement ... 110kVA Number of positions in the tool changer ... 100 Max. tool weight ... 15kg IKZ ... 60bar Machine weight ... 50000kg Spindle speed 12000 rpm Spindle mount. HSK 100T Workpiece Probe Renishaw OMP 60 Tool Probe Renishaw TS 27R Rinsing gun Handwheel 3x chip conveyor Documentation The machine is in good condition, possible to test under power.

Weight: 1.5t, operating hours unknown, with documentation, machine vices and fixtures are available as accessories, the machine ran in one shift operation and was serviced regularly. An inspection on site is possible.

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional

High-quality and precise Schaublin 110-CNC lathe. The machine is in very good condition overall and has been used carefully. Note: The spindle amplifier is currently defective and would need to be repaired or replaced. Otherwise, the lathe is full-fledged and well-maintained.

faceplate diameter: 3000 mm swing diameter: 3500 mm turning height: 3200 mm Control: Fanuc type: Series 320i Model A slide adjustment: 1750 mm ram head dimension: 300x300 mm x-axis: 2700 mm Table load: 30000 kg main drive motor: 100 kW Tool changer: 16 chip conveyor: total power requirement: kW weight of the machine ca.: 89 t dimensions of the machine ca.: 8,5x6x8 m No. 1104 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look ...

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90.0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11.0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mm swing diameter: 3500 mm turning height: 2550 mm workpiece weight: 50 t faceplate speeds from - to: 0,8 - 80 U/min main drive motor: 120 kW cross rail adjustment: 2100 mm Control: Siemens 840D total power requirement: 195 kVA weight of the machine ca.: 65 t overhauled/modernized in 2017: - CNC control Siemens Sinumerik 840 D, - 4-jaw faceplate, - 2 ram supports on the cross beam -- horizontal movement of tool head no. 1: 1400 mm -- vertical movement of tool head no. 1: 1500 mm -- horizontal movement of the tool head No. 2: 1980 mm -- vertical movement of the tool head No. 2: 1350 mm -- Swivel angle of the tool head: -/+ 30°. - Hydrostatic table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCHAUBLIN 140 CNC ist eine CNC-Drehmaschine mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazitäten: Dreh-Ø 300 mm; Spindelloch 51 mm; Stangendurchmesser 24/36 mm; Wege Z 370 mm, X 210 mm; Revolver 1×12 angetr. Werkzeuge. Technische Daten: 3 Achsen; Aufnahme A2-5 (VDI30); 30–6000 1/min (stuf.), stufenlos 50–5000 1/min; Werkzeugleistung 2.2/3.7 kW; C-Achse Aufl. 0.001°; Vorschübe 1–10000 mm/min; Eilgang 10 m/min; Druckluft 6 bar; 380V 50Hz; Masse ~3000 kg; Abm. 2530×1400×1840 mm. Zubehör: Lampe, Kühlmittel 130 l, Fußpedal. Ermöglicht enge Toleranzen; Bereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

STUDER S 40 CNC ist eine CNC Rundschleifmaschine hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Spitzenhöhe 175 mm, Spitzenweite 1000 mm, Werkstückgewicht max. 130 kg; Schleifscheiben Ø400×80 mm (Bohrung 127). Längsschlitten Weg 1050 mm, Querschlitten 275 mm; Werkstückspindel 30–750 t/min (drehbar 90°). B-Achse 15°+205° (Inkremente max. 5°); Schleifscheiben bis 1670/2110 t/min, Umfangsgeschwindigkeit 35 m/s. Werkstückspindelmotor 8 kW, Schleifmot. 1 kW, Gesamtbedarf 30 kVA, Anschluss 3x400 V 50 Hz; Gewicht ~5100 kg, Abmessungen 3750×1200×2300 mm. Zubehör: Innenschleifeinrichtung, 1 Spindel bis 60000 t/min, Beleuchtung, einstellbare Reitstockspitze, elektronisches Handbedienpult. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

ROLLOMATIC CNC 600 X ist eine CNC Werkzeugschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Schleiflänge 150 mm, Durchmesser 0,1–12,7 mm, Scheibe max 150 mm; Spindelaufnahme W20; W/U 600 mm; Verfahrwege Quer 230, Längs 180, Vertikal 150 mm; A -15/+90°, B -130/+45°. Daten: Drehzahl 2.000–7.200 min-¹ (stufenlos), Motor 14,5 kW, Anschluss 3x380 V 50 Hz; Abmessungen 2060×2032×1880 mm; Gewicht ~3500 kg. Erreicht enge Toleranzen; Einsatz: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

ROLLOMATIC CNC 600 X ist eine CNC-Werkzeugschleifmaschine, die Präzision, hohe Genauigkeit und Zuverlässigkeit bei der Schleifbearbeitung von Werkzeugelementen bietet. Bearbeitungsmöglichkeiten: Schleiflänge max. 150 mm; Schleifdurchmesser 0,1–12,7 mm; Schleifscheibendurchmesser max. 150 mm; Spindelkonus W15; W-/U-Achse 600 mm; Quer 230 mm, Längs 180 mm, Vertikal 150 mm; A: -15/+90°, B: -130/+45°. Hauptdaten: Schleifspindel stufenlos 2.000–7.200 t/min; Schleifspindelmotor 14,5 kW; Anschluss 3x 380 V, 50 Hz; Maschinengewicht ca. 3.500 kg; Abmessungen L2060×B2032×H1880 mm. Entwickelt für enge Toleranzen; typische Branchen: Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

STUDER S 31 LEAN CNC ist eine CNC Rundschleifmaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Spitzenhöhe 175 mm, Spitzenweite 650 mm, Werkstückgewicht bis 80 kg; Schleifscheibe Ø500×63 mm, Bohrung 203 mm, Revolver 2+1. Wege: Längsschlitten 800 mm, Querschlitten 254 mm; Werkstückspindel 1–1000 U/min (drehbar -15/+195°), MK4; Schleifspindelmotor 7,5 kW, Anschluss 3×380 V 50 Hz, Gesamtbedarf 32 kVA; Gewicht ca. 5200 kg, Abmessungen 3000×2200×2100 mm. Ausstattung: Touchtaster MARPOSS, Innenschleifeinrichtung, RS-232. Erreicht enge Toleranzen; Einsatzbereiche: Automobil, Luftfahrt, Werkzeugbau, Medizintechnik. Technische Daten ohne Gewähr

STUDER S 31 CNC ist eine CNC Rundschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenhöhe 175 mm, Spitzenweite 650 mm, max. Schleifdurchmesser 348 mm; Schleifscheibe links Ø500×63 mm, rechts Ø400×63 mm; Revolver-Schleifspindelstock 2 Spindeln; C-Achse Auflösung 0,0001°. Bewegungen und Spindeln: Längsschlitten Z Hub 800 mm, Querschlitten X Hub 254 mm; Schleifscheiben-Drehzahl 1.400–3.200 min-¹; Werkstückspindel 1–1.300 min-¹; Spindelbohrung 26 mm; Reitstock Kegel 3 CM, Pinolenweg 35 mm. Technische Daten: Vorschübe Z 0,001–10.000 mm/min, X 0,001–5.000 mm/min; Anschluss 3×400 V 50 Hz; Werkstückspindelmotor 3 kW; Gesamtleistung 23 kVA; Gewicht ~5.200 kg; Abmessungen 3000×2200×2100 mm. Zubehör: Papierfilteranlage, Kühlmittelfilteranlage, Innenschleifeinrichtung, Beleuchtung, elektronisches Handbedienpult, Schleifsch ...

Manufacturer: SPINNER Model No.: PD-CNC Year: 2006 Condition: Used Stock number: 9421 Control system: SIEMENS Sinumerik Maximum turning diameter: 120 mm Maximum length of travel in the X-axis: 400 mm Maximum feed rate in the Z-axis: 400 mm Max. rod diameter: 32 mm Spindle speed: 8000 1/min Length: 2300 mm Width: 1200 mm Height: 1700 mm Weight: 2300 kg

Lagun X: 3000 - Y: 1000 - Z: 1200 mm CNC Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1200 mm Dimensions clamping space- table: 3100 x 800 mm Power on spindle: 22 kW Type of millinghead: BT-50 Max speedrange: 50 > 3000 rpm (840 Nm) Control: Heidenhain iTNC 530 Power needed (KVA): 35 kW Length : 8744 mm Depth: 3765 mm Height: 3352 mm Weight: 14 ton

Kunzmann WF 7 CNC Fräsmaschine TNC 410 Steuerung Hersteller: Kunzmann Typ: WF 7 Baujahr: 2001 Zustand: gebraucht, unter Strom Steuerung: Heidenhain TNC 410 X-Weg 610 Y-Weg 400 Z-Weg 400 Aufnhame SK 40 Drehzahl 1-5000U/min Kipp/-Schwenktisch Lieferumfang: ? Unterlagen ? Diverse Werkzeugaufnahmen

met spanentransportband Longitudinal travel X-axe: 1050 mm Crosstravel Y -axe: 560 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 1400 x 550 mm Power on spindle: 9 kW Max speedrange: 10 > 6000 rpm Control: Fanuc O-M ACCESSORIES & TOOLING: toolchanger, 32 positions

Key data: 250 , 400 , 125

STUDER S21 CNC – Universal cylindrical grinding machine – 400 x 125 mm – Integral retrofit The STUDER S21 CNC universal cylindrical grinding machine is offered for sale. High precision machine designed for external, front and internal grinding operations, rebuilt and modernized by MIRA Retrofit, specialists in grinding machine reconstruction and retrofit. Equipped with turret wheel head, configured for: - 2 wheels for external grinding - 1 internal grinding wheel Description: - Manufacturer: STUDER - Model: S21 CNC - Year: 2008 - Distance between centers: 400 mm - Height between centers: 125 mm - CNC Control: GE Fanuc 21i-TB Series - Type: CNC Universal Cylindrical Grinding Machine The machine will be delivered completely rebuilt, adjusted, checked and ready to work. Availability: please consult National and international shipments. For more i ...

Maho MH 1000 S X: 1000 - Y: 560 - Z: 800 mm CNC Max longitudinal travel X-axe: 1000 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 800 mm Power on spindle: 15 kW Admission in boring head (ISO): ISO 50 Spindlespeeds: 2000 rpm Table size: 1250 x 800 mm Control: Philips 432 Length: 4600 mm Depth : 2500 mm Height: 2300 mm Weight: 7,5 ton Toolholder: yes

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions

Manufacturer: ZPS Model No.: S60/1000 CNC Year: 2001 Condition: Used Stock number: 9546 Control system: Heidenhain Pilot 3190 Maximum turning length: 1000 mm Max. turning diameter: 275 mm Maximum length of travel in the X-axis: 275 mm Maximum feed rate in the Z-axis: 1070 mm

faceplate diameter: 2500 mm swing diameter: 3300 mm turning height: 2200 mm workpiece weight: 15000 kg vertical adjustment of the crossrail: 1600 mm turning speed range - faceplate: 1 - 90 U/min main drive motor: 60 kW ram head swiveling: +/- 35 ° ram head - cross travel: 1200 mm ram head - vertical travel: 720 mm feed range: 1 - 3000 mm/min Control: FANUC 0i-TF total power requirement: ca 70 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 4,8 x 4,8 x 5 m Complete overhaul in 2026 - CNC FANUC 0i-TF - 1 ram on crossbeam - 4 clamping jaws for face plate - CE -- mechanical overhaul of all components (adjustment of the geometrical parameters of the machine according to ISO 3655) -- Grinding of the guides -- New telescopic covers -- FANUC main motor -- new electrics and CNC control -- new Fanuc servomotors -- ball screws dia. 50mm -- new hydraulics The data for this ad w ...

grinding diameter max.: 100 mm regulating wheel width: mm max. width of grinding wheel: 230 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 1000 mm z-travel: 1400 mm tool taper: ISO 50 spindle turning speed - stepless: 18 - 4000 U/min spindle motor: 22 kW table surface area: 5000 x 1000 mm table load: 10,5 t Control: Heidenhain TNC 530 A-Axis: +177,5 / - 180 ° rapid traverse: 1 - 5000 mm/min distance spindle /table: 125 - 1525 mm total power requirement: 50 kVA weight of the machine ca.: 29 t dimensions of the machine ca.: 13,1 x 5,4 x 3,86 mm medium overhaul in 2023/24, the spindle head and the mechanical components of the machine were refurbished. 5-axis machine - CNC control Heidenhain TNC 530 - MILLING HEAD O - FSQ 4000/750 -- 4000 rpm -- single spindle head with automatically adjustable spindle In a vertical or horizontal position the head can swivel around the cross axis from +177,5° to –180° by 2,5°. Swiveling around cross axis and H/V positioning comes from a regulatory servodrive o ...

Key data: 17000 mm, 4800 mm, 1270 mm

We are also pleased to offer the following Waldrich Coburg Gantry Milling Machine, located in Illinois, USA. Machine Details: Total Weight: Approximately 90 Metric Tons CNC Control & Upgrades: Siemens 840D CNC control (retrofitted in 2013) New CNC control system Complete new electrical wiring and electrical cabinets New Siemens AC motors and drives New main drive and motor Heidenhain glass scales on all axes Rigid tapping capability Included Equipment: (1) Right-Angle Head, Model WFU 250, ISO 50 taper, automatic indexing (1) Right-Angle Head, Model WFU 500, ISO 60 taper, automatic indexing Tool trolley with tool holders Steel sliding-way covers on X and Y axes (2) Chip conveyors Machine Capacities: X-Axis (Gantry Travel): 669” (16,993 mm) Y-Axis (Head Travel): 189” (4,800 mm) Z-Axis (Ram Stroke): 50.05” (1,271 mm) Distance Betwe ...

Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are  ...

Hydraulic ruler holder, Automatic grinding wheel balancer, Cover, Hydraulic working grinding wheel cover, Equipment AEROEL measurement, Hydraulic table locking, Hoist for 1,000 kg, Refrigeration in electrical cabinet, Panel tire, Coolant transfer tank, Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Grinding wheel dimensions (od x id x width): Ø 650 x Ø 304.8 x 500mm, Ø min / max to grinding: 3/200 mm, Ø min/max to be rectified: 3/200mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, No. of regulating wheel speeds: Infinitas, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Min/max speed of regulating wheel (r.p.m.): 10 / 255 rpm, Dressing (auto / manual): Automatic - CNC, Diamond cutting (auto/manual): Automatic - CNC, Diamond dressing speed: 255 r.p.m., Diamond cutting speed: 255 rpm, Lubrication (auto / manual): Automatic ...

This 3-axis GHIRINGHELLI M300SP610 CNC3A was manufactured in 1993. It features a grinding wheel diameter of 610 mm and a maximum wheel speed of 35 m/s. The machine is equipped with an automatic loading and unloading system, enhancing productivity. If you are looking to get high-quality centerless grinding capabilities, consider the GHIRINGHELLI M300SP610 CNC3A machine we have for sale. Contact us for further details.

Specifications / Technical Data S-400 Fraes machine / engraving machine With the High-Z CNC-Fraes.- and engraving machine you acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or put factory tins in a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +/-0,02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with a double-secured emergency exit button. Another is located directly at the controller. Basic equip ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm long Fraeser ), which is usually applied layer construction for large volume components in 3D mold ma ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...