135,482 used machines on RESALE, but how to find them? Machine Search
Key data: 135 t, 3050 mm
Manufacturer: DURMA Model No.: AD-R 30135 Year: 2021 Condition: Used Stock number: 9506 Compressive force: 135 t Maximum bending length: 3050 mm Axis: Y1/Y2 Machine height: 2975 mm Machine length: 4100 mm Machine width: 1900 mm Machine weight: 10500 kg
A Mikron CNC universal machining center in need of repair is offered. Operating voltage: 400V, frequency: 50Hz, rated current: 40A, control voltage: 24V DC, control: Heidenhain TNC 426, weight: approx. 5800kg. The tool changer is defective and the hydraulic accumulator is empty or defective. The machine has been used in production in single-shift operation with these limitations in recent years. The tools were changed manually, otherwise the machine can be operated. An on-site inspection is possible.
Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.
turning diameter: 310 mm turning length: 1000 mm control: MSX 501 total power requirement: --- kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 1500 mm turning length: 6000 mm control: Siemens 840 centre height: 700 mm centre distance: 6000 mm greates pass round over bed: 1500 mm swing diameter over slide rest: 1190 mm spindle bore: 128 mm spindle turning speed range: 4 - 630 U/min main drive motor: 37 kW workpiece weight: 8000 kg total power requirement: 67 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 8,5 x 1,5 x 1,8 m Cycle-controlled precision lathe with Siemens CNC control for machining shafts, flanged shafts and similar components - Siemens CNC control - 4-jaw chuck - Tailstock - 4-position tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type: CNC Turning Center Model: CTXbeta500V4 Manufacturer: DMGMORI Control: Siemens 840D si Operate solutionsline Year of Make: 2014 Location: EU (#301336) Facilities • Main spindle 34/25 kw rpm 5000 • Hydraulic 3-jaw chuck 250 mm • Manual tool measuring device • 12 VDI 40 station turrets • Tool drive for all stations • C-axis • Y-axis • Scale X • Chip conveyor • 12 bar / coolant system • Coolant spray gun incl. documentation if available Technical data Turning diameter max. approx. 410 mm Turning diameter standard approx. 270 mm Rod diameter max. approx. 65 mm X-axis approx. 300 mm Z-axis approx. 550 mm Y-axis approx. +/- 60 mm Spindle speed 1 approx. 5000 rpm Speed milling pindle approx. 4,000 rpm Rapid traverse X/Y/Z approx. 30/22.5/30 m/min Power spindle 1 approx. 34/25 kW Footprint L x W x H approx. 5.3 x 3.0 x 2.1 m ...
The machine is in good technical condition; it can be tested by prior arrangement.
Manufacturer: DOOSAN Model: PUMA MX 1600 ST Year: 2014 Condition: Used Stock number: 9512 Control system: FANUC Maximum turning length: 899 mm Max. turning diameter: 330 mm Maximum turning diameter over bed: 680 mm Maximum main spindle power: 15 kW Maximum spindle speed: 6000 1/min Weight: 11500 kg Equipment: Tool Holder Bar Feeder Strip workpiece remover Grips 2x universal chuck
The machine is in good technical condition; it can be tested by prior arrangement.
Key data: 20000 mm, 7900 mm, 2500 mm
CNC Gantry Milling Machine Waldrich Coburg PowerTec 4500 Built in 1999 with Siemens 840C CNC control X 20,000 mm (longitudinal gantry) Y 7,900 mm (transverse travel of the milling ram) Z 2,500 mm (vertical travel of the milling ram) W 2,500 mm (transverse beam perpendicular) Distance between uprights 4,380 mm Distance from spindle to table max. 4,000 mm Spindle overhauled in 2023 Spindle motor power 105 KW Spindle speeds 2 – 2,500 rpm (2-stage gearbox) Torque S1 9,000 Nm Spindle holder ISO 60 / ISO 50 405-speed tool changer 5 milling heads Universal milling head automatic indexing 1° / 1° Offer number V(F)-7155
Machine Type: CNC Turning Center Model: CTXbeta1250 TC Manufacturer: DMGMORI Control: DMG MORI CELOS with Siemens 840D sl Operate Year of Make: 2020 Location: Germany (#301432) Facilities - Turning-milling spindle HSK-A 63 - Tool magazine 80 places - Hinge belt chip conveyor - Main spindle ISM 102 33/40kW - Sub-spindle ISM 76 25/32kW - Counter-pressure stress main spindle and sub-spindle - Milling spindle 20,000rpm - High pressure cooling 80bar - Feed rinsing device, main spindle - Tool probe, BLUM for fixed tools in the turning/milling spindle - Tool probes for workpieces - Automatic door - Oil mist extraction mechanical - Bar machining package 104 mm - Workpiece pick-up device with conveyor belt - Hydraulic hollow clamping device n max 3,600 rpm - Indicator light, 4-colour - Machine Protection (MPC) - Electrical interface standard Profibus for Robo2Go - ...
turning diameter: 500 mm turning length: 910 mm control: Mazatrol Smooth G axis stroke (X,Y,Z): 450/200/960 mm : 1436 mm rapid travel x/y/z: 40000 mm/min rapid travel W: 30 m/min Main spindle:: spindle turning speed range: 5000 U/min Motor output (40%ED): 11 KW capacity at 100%: 7,5 KW spindle bore: 76 mm bar material dia.: 65 mm spindle nose: A2/6 3-jaw chuck: Kitagawa BR08 milling spindle: turning speed range: 12000 U/min power capacity: 7,5 kW tool taper: Capto C6 tool change unit: numbers of positions in the tool changer: 36 max. tool diameter: 125 mm max. tool length: 210 mm max. tool weight: 5 kg 2nd Spindle:: Subspindle Power: 11 / 7,5 kW Subspindle - speed: 5000 U/min spindle bore: 61 mm spindle nose: A2/5 total power requirement: 51,1 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3,8 x 2,5 x 2,5 m - CNC Control Smooth G - Main & Subspindle - ATC for 36 ...
Used machine NLX2000SY with loading magazine Machine Type: Turning Center Model No.:NLX2000SY Manufacturer: DMGMORI Control: CELOS Year of construction/IB: 2021/2022 Location:: Germany - Main spindle 15/11 KW - Chuck for main spindle - Automatic path control of the clamping cylinder for the main spindle. - Sub-spindle 11/7.5kw - Chuck for sub-spindle - Automatic path control of the clamping cylinder for the sub-spindle - Double footswitch for HSp and GSp - Coolant shower on lining - Spindle 2 tailstock specification - 20 Station turret - Milling drive for all stations 10,000 min-1 - Direct position measuring system X-Y-Z axis - Y-axis - Chip conveyors - Coolant pump 8bar - Bar feeder IF - Parts catcher conveyor belt for parts - Irco Bar Loading Magazine MUK 7012 III - Workpiece ejector (headstock 2) - Oil separator - Alternating speed - Spindle orientation ...
FALCON S4020 6 kW fiber laser was built in 2025 in China by FFG CHINA CO., LTD. The machine was launched in March 2026 and has been in operation for a small number of hours. It is covered by a valid warranty until February 2031. This fibre laser belongs to the FALCON S Masterline series, developed for users seeking high performance while keeping operating costs low. The machine is designed for the precise cutting of large sheets of metal with a maximum thickness of 30 mm. Cutting is performed using a fiber optic beam generated by a high-performance ULTRON 6 kW laser source. The narrow focal spot, combined with high energy density, ensures precise material machining with minimal thermal deformation. The fibre laser technology also offers greater energy efficiency and performance compared with other cutting methods. The FALCON S4020 features a BOCHU 3D cutting head with a range of us ...
CNC lathe Okuma LB 3000 EX II MYW 800 Control: OSP-300L Year of Make: 2014 Internal machine no. 75 Distance between tips or spindle lugs: 1085 mm Circumferential diameter over carriage / bed: 340 / 580 mm X-axis travel: 260 mm Y-axis travel: 115 mm Z-axis travel: 1,010 mm Travel C-axis: 360 mm Travel W-axis 895 mm Spindle passage: 72 mm Main spindle speed: 45 - 5,000 rpm Sub-spindle speed: 45 - 6,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: Chip conveyor Touchsetter Parts catcher Bar loading magazine IRCO MUK 7012 Bar length:1250 mm Coolant system TM 24, 8 bar
5-axis CNC machining center Type: DMU 40 eVo Manufacturer: DMG MORI Year: 2013 Control: Heidenhain iTNC 530 X: 400 mm Y: 400 mm Z: 375 mm B: -5•/+110• C axis Spindle speed: 18000 rpm Spindle taper: HSK 63 Max work diameter: 450 mm Max work height: 460 mm Max work weight: 250 kg Machine weight: 6900 kg Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...
control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: SIEMENS - - -: - - - - - - - - -: - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 255 mm centre distance: 1.080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1.000 mm control: EuroTurn spindle bore: 70 mm spindle taper: KK 8 DIN 55027 3-jaw-chuck diameter: 250 mm bed width: 360 mm turning speed range: 2 - 2.800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: PARAT Gr. 2 drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...
LOIRSAFE CNC hydraulic press brake Model No.: PHSE-90/30/26 Year of manufacture: 2005 Serial number: 15.629 Bending force: 900 kN / 90 t Folding length: 3,050 mm Travel: 150 mm Main motor power: 5.5 kW Power supply: 400 V, three-phase, 50 Hz Full-load current: 17.5 A Machine weight without tooling: 5,000 kg Maximum tooling weight: 200 kg Maximum approach speed: 100 mm/s Maximum working speed: 10 mm/s Stopping Time: 64 ms Equipped with CNC control Pedal drive Auction-ID: A7-49809-4
pressure: 80.0 t chamfer lenght: 2570 mm distance between columns: 2125 mm column arm: 420 mm table width: 60.0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm dayligth: 470 mm table height: 960 mm Number of working hours: ~ 33.100 h oil volume: 90.0 l total power requirement: 9.0 KW weight of the machine ca.: 5750 kg. range L-W-H: 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=SskqZJdQxsQ https://www.youtube.com/watch?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front ...
Universal Milling Machine Deckel Maho DMU 50 BJ 2004
Key data: 26 mm
5 CNC lathes machines for sale ONLY in PACKAGE : 1. CNC sliding head lathes, 3 pieces Make : Traub Type : TNL 26 Year of construction : 2011 / 2008 / 2006 Hours : 64.154 / 75.849 / 81.823 Control : Mitsubishi TX 8i Equipment : - Main spindle - Sub-spindle - Turret top - driven + Y axis - Turret lower - driven + Y axis - Front apparatus - driven + Y axis - Residual apparatus - Bar feeder 2x FMB / 1x Breuning The machines come from ongoing production. 2. CNC lathe, 2 pieces, one defective Make : EMCO Type : Turn 332 MC Year of construction : 2010 / 2008 Operating hours : unknown Control : Siemens Sinumerik 840D Equipment : - Main spindle - Sub-spindle - Revolver top - Revolver underneath - Bar feeder TOP ETL 8-45 One machine is from ongoing production, one has already served as a spare parts carrier, and several components have been ...
CNC Swiss Automatic Lathe with Bar Loading Magazine Stamag FMB Turbo 5-42 TX8i control system with Traub tool monitoring Main spindle: - C-axis with driven tools - Holder for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bush Sub-spindle: - Counter spindle as motor spindle with hollow clamping and locking device with Z4 carriage - C-axis - Tool carrier lower X1 / Y1 - Axes - 12 tool holders driven - Tool carrier top X2 / Z2 - Axes - 12 tool holders, driven - X3 - Transverse axis for front apparatus / sub-spindle - Front apparatus 5-way with Z3 carriage without tool drive - Tapping side processing station (5 tools) with axis X4 / Y4 without Tool drive - Hinged belt conveyor - Coolant equipment for externally and internally cooled tools, 20 l/min - 30 bar - Equipment for deep hole drilling with comp ...
The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.
turning diameter: 590 mm turning length: 1100 mm control: Fanuc turning diameter over bed: 800 mm total power requirement: --- kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 340 mm turning length: 500 mm swing dia.: 695 mm X-Axis movement: 215 mm Y-Axis movement: 100 mm Z-Axis movement: 605 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: Mazatrol Smooth G Main Spindle:: Spindle Speed: 4000 1/min spindle motor: 18,5 / 15 kW spindle bore diameter: 80 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 7,5 / 5,5 kW spindle bore: 80 mm spindle distance: 605 mm total power requirement: 36,7 kVA Weight: - t dimensions of the machine ca.: - m - Mazatrol Smooth EZ - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 10 -- Counter: 6 - Chip conveyor - Coolant system - Iemca Kid bar feeder (80 mm bar diameter) ...
turning diameter: 600 mm turning length: 1.045 mm control: MSX - 711 III MAPPS III swing diameter over support: 600 mm distance between spindles: 1.255 mm max. bar capacity: 65 mm Main drive 2: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 25 / 22 kW no. of turning speeds: 2 spindle nose: JIS A2-6 spindle bore: 73 mm internal diameter: 120 mm C-Axis: 0,0001 ° chucking diameter: 200 mm Milling Spindle:: Speed range Tool Spindle: max. 12.000 min/-1 Power rating Tool Spindle: 5,5 / 3,7 kW tool taper: Capto C5 internal diameter: 65 mm B - Axis: 0,0001 ° swivellable: +/- 120 ° axis stroke:: x-axis: 685 (610 + 75) mm y-axis: +/- 125 mm z-axis: 1.075 + 130 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 20 mm Drill shank diameter: max. 32 mm tool magazin:: tools in tool magazin: 40 pos. max. tool diameter: 70 mm max. tool ...
Traub TNK 65Year of manuf. : 2016 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):35 kWTorque (max.):120 NmBarcapacity:65 mmWorkpiececlamping:Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:Motor spindle, integrated in tool carrier IISpeed:7.000 rpm:Power (max.):12 kWTorque (max.):22,5 NmChuck:Hainbuch Spanntop Kombi Axfix Gr. 42Toolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmToolcarrier II (X/Y/Z):Technology:Turret with 9 stationsTaper:Traub ø45 mmTooldrive:12.000 rpm, 10 kW, 8 NmMovement in X/Y/Z:140/100/300 mmBackworking attachment:Technology:Backworking attachment with 8 stations (2x synchron, 6x asynchron)Driven Tools:5 stationsTooldrive:12.000 U/min, 6,7 kW, 5,3 NmEquipment/Accessory:Positionsensor:Direct Sca ...
BAIWEI BW-G3015 1,5 kW fiber laser was built in 2019 in China by ZHENGZHOU BAIWEI CNC MACHINERY SHARES CO., LTD. The machine, designed for the precise cutting of sheet metal with a maximum thickness of 14 mm is ideal for both unit and series production. Cutting is performed using a stable fiber beam generated by a RAYCUS 1,5 kW laser source. The fiber laser technology offers greater energy efficiency and higher performance compared to other cutting methods. The BAIWEI BW-G3015 is equipped with a RAYTOOLS cutting head with a range of useful features. The autofocus automatically adjusts the focal position to the thickness of the material being machined. An anti-collision system detects obstacles, reducing the risk of the head colliding with the workpiece. These solutions enable efficient cutting while maintaining a high level of machining accuracy. All process parameters are programm ...
Key data: 600 mm, 2000 mm
Weisser Heilbronn HEKTOR - Cycle CNC lathe - Bosch CC220 controller (in need of repair) - incl. tools & accessories - incl. operating instructions & technical documents - Built in 1992 Technical data: - Center width: 2000 mm - Tip height: 300 mm - Turning diameter over bed: 600 mm - Spindle bore Ø: 80 mm - Quill holder: MK5 - Bed width: 430 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 4700 x 2300 x 2100 mm - Weight: approx. 8000 kg
DECKEL MAHO DMC 63 V CNC vertical machining center was built in 2003 in Germany by DECKEL MAHO Geretsried GmbH. The machine has been regularly serviced and maintained throughout its entire service life. As part of the service work carried out, the CNC controller power supply, the coolant pump in the cooling system and the Y-axis cover scrapers were replaced. The gripper clamping force was adjusted and a new spindle covered by a one-year warranty was installed. The DECKEL MAHO DMC 63 V is designed for precision milling, drilling and threading of metal workpieces. Machining is performed by a spindle cooperating with an automatic, 24-position tool magazine. The spindle, driven by a high-power motor, reaches a maximum speed of 10000 rpm. The tool measuring probe, together with the readout system supports correct tool setting, ensuring high precision of the operations performed. All proces ...
STIGAL VXstandard plasma-gas cutting machine was built in 2013 in Poland by STIGAL Marcin Stępień. The machine is used for the precise cutting of large-size sheet metal with a maximum length of 7 metres and a width of 2 metres. The use of both a gas and a plasma torch allows the cutting method to be adapted to current production requirements. The plasma arc is generated by a high-performance CEBORA PLASMA PROF 254 source, which minimises spatter during operation and reduces the need for additional machining of the finished parts. These features make the STIGAL VXstandard suitable for the production of precise steel components used across various industrial sectors. The machine features a stable, open design that provides free access to the work area from all sides. Outside the main work area is a attachment designed for tube machining. All process parameters are programmed using an ...
Bystronic BySprint Fiber 4020 - Laser Cutting Machine - Bystronic ByVision CNC control - 15" TFT-LCD control panel - Operating hours: 25076 h - Cutting hours: 10728 h - Year of construction 2015 Technical data - Laser Source: Fiber Laser - Laser power: 6000 W - Working range: 4064 × 2024 × 70 mm - X-travel: approx. 4000 mm - Y-travel: approx. 2000 mm - Z-range: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminium: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connected load: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15000 kg
sliding headstock CNC lathe, year 2015, 2368 operating hours, CNC 31i-MODELB. Used machine. More info & price on IndustrialBuyer.
x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 0 - 8.000 U/min hollow: 20 mm control: FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. Ibjbmlszymb Seurhasb 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
Key data: 44 t, 1600 mm, 1530 mm
Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!
maximum number of results exceeded
please refine your search
2.400 € 
