136,857 used machines on RESALE, but how to find them? Machine Search
- Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - Projection 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm. - Operating voltage 380V-50Hz - Infinitely variable speed adjustment, by means of an adjustment lever - Engine speed in 2 stages, 700/1435 rpm - Tapping device with rotation direction change after reaching the end stops - Coolant device fully installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - Precision machine vice new (test winner)
For colon 70 single-phase transformers Auction-ID: A1-50700-17
For colon 60 single-phase transformers Auction-ID: A1-50700-18
Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg
Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.
From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts
pressure:6,3 t throat:170/180 mm stroke:310 mm power capacity:3 kW dayligth:775 mm weight of the machine ca.:1,5 t clamping table:470 x 330 mm table height over floor:800 mm C-Type 1 Station
press capacity:950 kN control:Siemens S7 Required air-pressure:6 bar loading area:1200 x 600 mm Pressure power:1000 kN total power requirement:18 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:2600 x 1300 x 3100 mm
pressure:160 t throat:360 mm stroke:500 mm total power requirement:17 kW weight of the machine ca.:7,2 t dimensions of the machine ca.:2,0 x 0,95 x 3,70 m table-size:900 x 630 mm Documents:vorhanden
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
weight of the machine ca.:620 kg dimensions of the machine ca.:1000 x 920 x 1550 mm
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm Column drilling machine with: Thread cutting function. Digital depth display Coolant system 2 stage motor Spindle protection Swivel table Pivoting drill head LED lighting Packaging dimensions: 730x760x188mm Weight 340kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Column-mounted jib crane with chain hoist 125kg Type designation: AS1 25-2,1 Manufacturer: Vetter Krantechnik GmbH YOC: 2019 Condition: very good, like new Delivery available for an extra charge The retail price is net
Offer 22090 Specifications: - Drilling capacity in steel ST 60 20 mm - Drilling spindle holder MK 2 - Drilling spindle stroke 120 mm - 4 drilling spindle speeds 400 - 2000 rpm - Projection 250 mm - Max. distance table - drilling spindle 720 mm - Table with 2 T-slots 440 x 360 mm - Height adjustable via rack with hand crank - Drive 380 V / 0.6 kW - Space requirement approx. W 550 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - Drill chuck 3 - 12 mm
Key data: 16 mm
Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm
Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg
Offer 24280 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 175 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 290 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button -Lighting - Machine vise - 15 pieces HSS – drill bits 8 to 20 mm
Key data: 30 mm
Special price € 4,100 instead of 4,930 excl. VAT Solberga SE2030 - Gear drilling machine (new) Recording: MK3 Capacity: 30 mm - The drill head can be swivelled 360° around the column and is height-adjustable. - The gearbox is built with our traditional and tested technology for the highest possible torque. Helical gears in combination of steel and reinforced fiber material provide a high degree of efficiency, a low noise level, as well as a long service life and an almost maintenance-free transmission. - The spindle is made of steel and ensures optimal concentricity of the tool thanks to its adjustable tapered roller or ball bearing. The machine has an adjustable spindle return spring. This allows the restoring force to be adapted to the weight of the tool. - Automatic feed (M model) - When the preset drilling depth is reached, the spindle returns to its original positio ...
Key data: 5000 mm, 275 mm, 310 mm
Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...
Key data: 25 mm
Special price 2.630,- instead of € 3.090,- excl. VAT - Exact setting of the drilling depth - Suitable for drilling and tapping (optional) - The drilling table is height-adjustable and can be rotated around the column - Made in Sweden Specifications - Drilling capacity: 25 / 28 mm - Quill stroke: 130 mm - Tapping capacity (steel / cast iron): M 16 / M 20 - Spindle holder: MK3 - Spindle speed: 129 - 1498 rpm - Gear stages: 4 - Max. distance spindle/table: 730 mm - Projection: 255 mm - Drilling table size: 500 x 400 mm - Column diameter: 100 mm - Motor power: 0.65 kW - Voltage: 400 V - Dimensions WxHxD: 500 x 1720 x 500 mm - Weight: 185 kg
pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t stroke: 100 mm table surface area: 440x320 mm ram surface: 360x220 mm hole in the table: 160x100 mm table height: 900 mm tool hole in ram: Ø 40 mm dayligth: 280 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: BxTxH 1500x1500x2100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 400 mm stroke: 6-125 mm ram - range of adjustment: 100 mm dayligth: 400 mm table surface area: 1100x750 mm no. of strokes: 60 Hub/min ram surface: 800x550 mm hole in the table: Ø 150 mm total power requirement: 14 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 250 mm stroke: 100 mm ram surface: 500x400 mm hole in the table: Ø 110 mm table height: 850 mm tool hole in ram: Ø 40 mm ram surface: Ø 150 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x2000x2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 350 mm stroke: 16-200 mm no. of strokes: 55 Hub/min ram - range of adjustment: 100 mm table surface area: 1200x700 mm ram surface: 730x530 mm hole in the table: 300x210 mm table height: 900 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,0 t dimensions of the machine ca.: BxTxH 1500x2200x3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 380 mm stroke: 400 mm power capacity: 22 kW dayligth: 600 mm ram surface: 600x500 mm table surface area: 720x600 mm weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t passage width: 810 mm stroke: 400 mm table surface area: 1140x740 mm ram surface: 1140x740 mm dayligth: 670 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1800x1800x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Column crane DEMAG SSK - KBK I/I-V ( SSK-KBKI/I-V ) Bj: 2000 Lifting capacity: 80 kg Span width: 2400 mm Hook height: 2600 mm < br /> trolley DC-PRO 1 - 80 H5 V1 Year: 2005 Lifting speed: 4 / 7 m/min 380 V (motor housing slightly cracked) used, ! Dimensions: 3550 x 2600 x 900 mm Weight: approx. 370 kg
Offer 25020 Specifications: - Compressive force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Diarrhea hole in the table approx. 320 x 220 mm - Pushrod area 940 x 400 mm - Plunger adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg
Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp
heavy 40s Gillardon with cross table
Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg
bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 70 mm throat: 420 mm bore stroke: 260 mm thread capacity: 50 M spindle taper MT: 5 MK column diameter: 220 mm bore spindle turning speed range: 51-966 U/min table-size: 600x600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
1 € 
