cnc cut used for sale

Machine is in very good condition X : 600 mm Y : 400 mm Z : 350 mm

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000

60″ x .135″ x 20,000Lb Dahlstrom CTL Line Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Cut to length line Redman 2000mm x 13mm x 20 ton Make: Redman (UK) Material Width: 600mm – 2000mm Material Thickness: 6mm – 13mm Coil Weight: 20 ton Coil ID: 460mm – 760mm Coil OD: 1800mm Max Speed: 20 meters per minute Production Mode: Stop / Start Direction: R-L Entry V-Type Coil Car Double Mandrel Uncoiler Hold-Down Roll Hydraulic Peeling Table Driven Pinch Rolls Pinch Rolls Diameter: 330mm Corrective 4-Hi Leveler Nine (9) Working Rolls Work Rolls Diameter: 140mm Hydraulic Work Rolls Adjustment Up and Down Back Up Flights 120HP DC Motor Drive Mechanical Shear with Motor Belt Conveyor with Measuring Head Drop Type Stacker with End Conveyors Electrics, Hydraulics, Controls

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

REF-1059 CHOP CUTTER CRM NEXUS 220 Manufacturer: CRM (COSTRUZIONI-REVISIONI-MECCANICHE) Model: Nexus 220 Year: 2003 Entirely built in stainless steel Power: 4kW 220/380V, 50Hz. Three-phase Inner dimensions: - Max. piece length: 900mm - Max. piece height: 260mm - Max. piece width: 220mm Outside dimensions: Length 2,130mm, width 800mm, height 1,200mm

Unused in box

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unused Rated power: 9.2 kVA Rated current: 14 A Open-circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic duration factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Without plug.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow Start: Contact

Unit for precision cutting Make: IMA

Connected load: 1.5kW, including documentation.

2000mm x 8mm x 30ton FIMI CTL Line Cut-to-length line FIMI 2000mm x8mm x 30t can help you handle all your cutting needs with sheet metal up to 8mm thickness, 20000 mm width and 30t maximum coil weight. This line is equipped with two levelers to provide high top straightening quality and flying shear to make cutting process perfect Manufacturer: FIMI – ITALY Year: 1990 Material: CR-GZR-RP-RKK Yield Strength: 180-400 Mpa Tensile Strength: 220-550 Mpa Coil Width: 800-2000mm Coil Thickness: 1-8mm Coil Weight: 30 Ton Line Speed: 1-25m/min Direction: Left to Right Sheet Tolerance/Size: Length Tolerance: +/- 1 mm Diagonal Tolerance: 0.1% x Sheet width Sheet Width: 800 – 2000 mm Sheet Length: 3000 – 12000 mm Electric AC: 380V /50 Hz / 3 phase AC Control Voltage: 110 V Control Voltage: 24 V Double Mandrel Uncoiler Sliding Base Powered Mandrel Expansion Powered ...

Polar 115X guillotine Polar RAB4 jogger + Bizerba scale Polar LW-1000 lift

Wohlenberg 92 Cut Tec Year of construction: 2002 Cutter version with monitor Air table, 2x side tables, spare blades Very good condition! At call!

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Complete cutting system consisting of: - Wohlenberg Cut-Tec 137 - Baumann automatic shaker BOD / L - Baumann unloader BA 3 N Year of construction: 2002 Display has been renewed. Accessories: several spare knives, cutting strips, documentation, etc. The machine was used in a single-shift operation, is ready for use and can be tested on site. Price ex works. "Sold only to entrepreneurs. The object of purchase is sold to the exclusion of any warranty"

1 x Polar N137 Plus guillotine (year 2013), equipped with: air table, 2 side tables, 2 knives, photo cells, program 1 x Polar EL 130-4 unloader (year 2013) 1 x LW 1000-4 stack lift (year 2013) 1 x Polar RA-4 (year 2013)

WOHLENBERG pro-tec 137 with ASE – cutting line  Wohlenberg 137  Year / SN 2007  Airtable  Touchscreen  CIP3 + CIP4 compatible  ASE  Photocells  Program  Sidetable  Baumann NUP 1000 – Stacklifter  Max Sheetfed size: 135cm x 110cm  Baumann BSP 3 L – Vibrator  Papersize: 80cm x 114cm  Baumann BA 3 – 1400 – Unloader  Papersize: 80cm x 140cm  Mettler Toledo Scale

1370 mm Air Photocell Digital Programmed Additional Knife Very Good Condition Immediate Delivery

WaterJet MicroStep Aqua Cut 3001.20 was built in 2005. The waterjet cutting machine allows you to cut sheet metal with a maximum thickness of 120 mm on a table size (L x W) 3300 x 2200 mm. The machine portal is equipped with two heads for water cutting, one of which is rotating. The waterjet is controlled by the MSNC 500 CNC controller. The MICROSTEP Aqua Cut 3001.20 WWr + 4001.20P water cutter is offered with extensive equipment, including: Streamline SL-V 50S Plus oil cooler, ATLAS COPCO FX1 dryer and KKT KRAUS OLB7 cooling unit. The plasma source and the additional head also enable plasma cutting after installing an additional table.

Phenix RS LT CUT 2040 plasma cutting machine With POWERMAX 125 GENERATOR Hypertherm Plasma Torch - Set Harnesses, Hypertherm cables and voltage divider board - Altitude control feeler and Hypertherm anti-collision - Mechanically welded machine frame, rectified on machining center - Machine frame with 4 PANASONIC Motors / Brushless encoder 15003000 Double motorization in X - Automatic game catch-up between rack and pinion - Precision gearbox, guides and racks - Smoke suction trays compartmentalized - Removable slag collection trays by the side - Electrical cabinet - PHENIX Numerical Control TECHNOLOGY - Industrial PC -Laser pointer - 3 axis wired joystick -Pneumatic dot peen marker - Central suction and filtration of smoke EASY 3 7.5 KW -Pre separator (spark trap)

Agie Charmilles CUT30P EDM Wire Cutting Machine Axis movement: X, Y, Z : 600 x 400 x 350 mm Maximum workpiece size : X, Y, Z 1050 x 800 x 350 mm

Phénix RS MD CUT 2040 plasma cutting machine Following the closure of our manufacturing plant, we are selling our large Plasma table: - 4 Panasonic or HDT brushless motors - Machined frame and beam - Rack and pinion transmission and linear guide - Quality precision reducer - X-axis dual motor drive - Automatic control of the height of the THC torch - Anti-collision system included - Removable steel slag collection tray, exiting on the side of the machine - Removable grating blades mounted on a removable frame - The table is equipped with an integrated fume extraction tray with pneumatic partitioning - Edges facilitating the positioning of the sheets - Grids for collecting small parts on the cutting surface - XPR 170 plasma generator

Maker: Muhong Material Width: 500mm - 20000mm Material Thickness: 8mm - 20mm Coil Weight: 35 ton Coil ID: 410mm - 650mm Coil OD: 1800mm Direction: Right to Left Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 5-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 300mm Motor: 132Kw DC Drive Driven Exit Conveyor 9-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 230mm Motor: 200Kw DC Drive Driven Exit Conveyor Hydraulic Shear Entry Entry Pinch Rolls Self Contained Hydraulics Exit Driven Conveyor Drop Type Stacking System Electrics, Hydraulics, Controls

Line consists out of: 1 - Double head decoiler: - cap: 25 ton - max length of coil: 2 meter - max diameter of coil: 3 meter 2 - Pre-leveller/straightening + edge slitting unit - 2 slitting heads are movable to slit the edges of the sheet - variable from 400 to 2000 mm wide 3 - Ungerer leveller/straightening unit - 6 + 7 rolls - for fine levelling/straightening - max thickness: 4 mm 4 - Schröder shear - max cap: 2050 mm - max thickness: 4 mm 5 - feed-out table + sheet storage Workwidth x sheetthickness: 2050 x 4 mm Straightner: yes Shear: yes

WOHLENBERG 115 PAPER CUTTER Manufacturer: Wohlenberg Type: 115 Year of production: 2001 Max. Paper size: 115 cm Available immediately

1 x Polar 137 XT guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar TR 130ER-4 unloader 1 x LW 1000-4 stack lift 1 x Polar RA-4

General SKU391T1169 LocationBarneveld Make(unknown: missing typeplate) Main Features MaterialStainless steel Volume23 Ltr. Motor2.2 KW Specified Features - Cutter Cuttercheck Bowl cuttercheck Capacitymax. ± 23 Ltr. Diameter360 mm Depth230 mm With scrapercheck Inletdia. 210 mm Outlet290x120 mm Motor2,2 kW Speedscrapers: ± 141-142,5 mm, dicers: ± 564-570 rpm, slicers: ± 846-855 rpm MaterialAluminum bronze, Stainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck Floorspace1,0x1,3 m Total height1,53 m Weight560 kg Extra Specificationswith extra rotor and knifesCutters-Mills > CuttersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU354T1001 LocationBarneveld MakeUrschel TypeGK No.2017 Year of construction1983 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Cutter Cuttercheck Continuous cuttercheck Number of knife blades8-25 With scrapercheck Inlet460x250 mm Outlet180x Motor1,5 kW With variable speed drivecheck MaterialStainless steel Information Mounted on framecheck With switchcheck Weight470 kg Floorspace1,87x1,17 m Total height1,2 m Extra SpecificationsTYPES OF CUTS: SLICES: 1.6 to 19.1 mm DICES: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. :Slice thickness: 3.2 to 19.1 mm  :Crosscut knives: 7.1 to 22.2 mm  :Circular knives: 2.4 to 76 mm STRIP CUTS: To make strip cuts, only the slicing knife a ...

General SKU094Y625 LocationBarneveld MakeCondux TypeHR9/N3 No.92 Year of construction1988 Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter MaterialStainless steel Cutters GrinderSlicer/chipper (1x) Rotor sizedia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW Information Floorspace1,3x1,2 M Total height1,8 MCuttersConduxMills > CuttersBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU010H020 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeComitrol MG-1700 No.1512 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm With hoppercheck Inletdia. 300mm Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU010H018 LocationBarneveld MakeUrschel Laboratories Inc. Valparaiso USA TypeMG-1700 No.1173 Year of constructionunknown Main Features MaterialStainless steel Motor22 KW Specified Features - Cutter MaterialStainless steel CutterComitrol processor Knife diameterdia. 150mm Inlet150 Motor22,0 KW, 380 Volt Information Mounted on framecheck Floorspace1,3x0,6 M Total height2,0 M Weight380 KGCuttersUrschel UsaMills > CuttersBrand > Urschel Usa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU004Y068 LocationBarneveld MakeAlexanderwerk TypeGKM No.21313 Year of constructionunknown Main Features MaterialStainless steel Motor1.3 KW Specified Features - Vegetable cutter MaterialAluminium, Stainless steel Vegetable cutter/Planetary mixer (1x) With motor1,1/1,3 KW, 380 Volt With hoppercheck Information Mounted on legscheck Mounted on wheelscheck With switchcheck Extra Specifications- With Schneidaufsatz - With Zweikammeraufsatz - With Planeten-Rühr- und Schlagmaschine type PMA-20 Vegetable cuttersAlexanderwerkMills > Vegetable cuttersBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Type: MATRA TAPE CUT W2 Parameters: 500 mm, 350 mm Manufacturer: Fanuc Year of production / SO / GO: 1991 / - / - Description: The machine is in good technical condition. X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Voltage: 200V AC + -10%; three-phase; 50 / 60Hz Cooling water temperature: 10-25 ° C Water flow: 15-35 liters / minute Sold including: 1st filter SW37 D340xd46xH450mm - 3pcs 2.Savah RVH600 - anti-rusting workpiece - 5 liters 3.Eleion plus - resin to reduce the conductivity of working water - 50 liter barrel - full up to 3/4 volume 4. Various small spare parts - see. photo- Dimensions L x W x H: 3500 x 2400 x 2400 mm Weight: 2300kg Upon agreement, the possibility of a tour in progress.

Key data: 320 mm, 250 mm, 160 mm

Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm

Make: Alcos Material: CRS, HRPO, EG, GL, Pre-Paint Max Shear Strength: 50,000 PSI Max Yield Strength: 65,000 PSI Material Width: 12″ – 72″ Material Thickness: .015″ – .135″ Weight: 60,000Lbs Coil OD: 12″ – 72″ Coil ID: 20″ – 24″ Stacker Weight: 20,000Lb Max Line Speed: 250 feet per minute Direction: L–R 4-Arm Entry Tursntile Model: ST4-60K-72 Entry L-Type Coil Car Model: FCC-60K-72 Mandrel Uncoiler 4-Leaf Pumpkin Tooth Mandrel Powered Expansion Water Cooled Brake Hydraulic Feed Up Drive Sliding Base Powered Out-Board Support Hydraulic Peeling Table Driven Entry Pinch Rolls Hydraulic Entry Crop Shear Adjustable Edge Guides Scrap Receiving System Alcos 5-Hi Precision Leveler Model: 175-5H-72 Entry & Exit Driven Pinch Rolls Work Rolls Diameter: 1.75″ Number of Work Rolls: 19 Nine (9) Back Up Flights 150HP DC Motor Drive ...

Cut-to-length line Herr Voss – Wysong 72″ x .135″ x 40,000Lb (A3788) Make: Herr Voss – Wysong Material: CR, HR, Stainless, Aluminum Material Width: 12″ – 72″ Material Thickness: .030″ – .135″ (-030 – .187″ 60″) Weight Capacity: 40,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Direction: L-R Speed: 200 feet per minute Entry L-Type Coil Car Make: Sauer Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Make: Wean Powered Hold Down Roll Sliding Base Pneumatic Brake Feed Up Motor Hydraulic Peeling Table Driven Entry Pinch Rolls Herr Voss 6-Hi Precision Leveler Year New: 1999 Model: VKL-84/2.187/19/7/6-Hi Work Rolls Width: 84″ Work Rolls Diameter: 2.187″ Number of Work Rolls: 19 Motor: 150HP DC Drive Inc Jet Coder Adjustable Hump Table Size: 75″ x 12′ PVC Paper with Static Charge Bar ...

Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco 60" x .187" x 50,000Lbs CTL Line Excellent conditions

CNC cross-cut saw Paul Type 18 E Specifications - Incoming wood length (mm): 2300 - 3500 - Wood thickness (mm): 27 - Wood width (mm): 80 - 600 - Type of wood: oak, beech unedged, kiln-dried, rough-sawn - Shortest sections to be sawn (mm): 2250 - Cutting width (mm): 78 – 220 - Machine frame: made of sturdy welded construction with 20 mm load-bearing walls - Machine hood: with viewing window that can be folded up, soundproofing (sound level < 85 dB (A)) - Cutting height (mm): 180, with saw blade diameter 800 - Note: Machine without control cabinet, as it was integrated into a machine line

R21746/11 HOBEMA Cross cutter Model: 101 A Built: 1969 Working width: 700 mm Availability: by arrangement with collecting cylinder Available: by arrangement

<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once