cnc bending used for sale

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Key data: 100 mm, 160 mm, 115 mm

Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

4 ROLL HYDRAULIC DUAL PRE-PINCH 3000x15 MM PLATE BENDING MACHINE NEW Brand MG model M3015 -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat -safety and emergency systems installed -manuals and schematics along with the machine

PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHAFTS SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 – 78 – 90 – 116 – CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE COMMANDS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTONS CAPACITY CHART IN ENCLOSED FOR MACHINE PERFORMANCES MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL AND HORIZONTAL SAFETY AND EMERGENCY STOP INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS DOCUMENTS IN ORIGINAL DIMENSION 1260 X 1000 X H1260 MM -WEIGHT 1000KG

Machine Type: Profile Bending Machine Make: COMAC Type: 308 Year of manufacture 2004

6 axis Type of controll tasc 6000 Power (ton) 320 Length ( mm) 4420 Depth groove ( mm) 420 Passage between the couloumn (mm) 3680

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,000 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 102.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

Key data: 300 t

300 T Gantry Straightening Press – Gantry Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic gantry press with a pressing force of 300 t for straightening, assembly and machining processes on large-format components. Base price: 142.000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with T-slots according to DIN 650 75 mm table top Servo hydraulic ...

pressure: 80.0 t stroke: 285 mm flat steel: 300 x 25 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 750 x 1425 mm total power requirement: 10.0 kW motor: 400 Volt 50 Hz oil volume: 120 l weight: 1700 kg range L-W-H: 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) Bending punch .. degree: 60° / bending radius: 5.0 mm Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions The data ...

Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

wire diameter 10-16 mm feed legth 100-250 mm pitch 5x dia. output pieces/min 25-50

dia. range 5 mm width of band 40 mm feeding length 500 mm stokes per minute 200 1/min

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

3D - CNC wire diameter 5-12 mm feeding length unlimited

Max. bending capacity: 300 kN (30t) Cylinder stroke: 250 mm Pressure adjustable from 0-300 kN Tool height: 200 mm Bending capacity:140 x 20 mm for V125; 200 x 18 (19) mm at V200 straightening capacity Wy200 at straightening block spacing 1,000 mm Length stop with several stop flaps Automatic and manual mode possible Weight: approx. 700 kg

Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Dimensions in the pictures -Tool: for press brake -Tool: with radius 1500 mm -Beading height: 8 mm -Tool gap: 2.5 mm -Tool: is guided -Tool intermediate dimensions: 900 mm -Transport dimensions: 1200/200/H230 mm -Weight: 210kg

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Manufacturer: Betschke Wegerhoff, lower tool: for press brake 4 pieces -Total length: 3320 mm / 3 x 835 mm 1 x 815 mm -Prisms: 12 mm x 37° / 8 mm x 35° -Dimensions: see drawing in the photos -Transport dimensions: 835/290/H65 mm -Weight: 77 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8 to 3 -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3 (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as seen, see photos -Condition: upper bending tool has been welded -Manufacturer: LOTZE Swivel bending machine type HDZKE20 -Drive: mechanical -Max. working width: 2000 mm -Max. sheet thickness: 6 mm -Max. intermediate dimension: 235 mm -Connected load: 5.2 kW -Dimensions: 1340/3460/H1400 mm -Weight: 3700 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Continue spiraalschroefmachine voor de productie van industriële schroeven. Spiraalvormige schoepen worden gevormd door een metalen strip onder druk door conische rollen te leiden. Maximale strookbreedte: 200 mm Maximale stripdikte: 11 mm spiraalrichting naar links of naar rechts optimale rolsnelheid: 80 tpm Spoelcapaciteit: 5 ton Gewicht van de machine: 12 ton vermogen: 75 pk Inclusief rolslijphulpstuk: hiermee kunnen de conische rollen opnieuw geslepen worden zonder ze uit de machine te hoeven verwijderen. Inclusief hydraulische guillotines: geschikt voor het doorsnijden van alle soorten vleugels. Standaard steek: de buitendiameter is gelijk aan de steekmaat. Korte spoed: de spoed is kleiner dan de buitendiameter. Lange spoed: de spoed is groter dan de buitendiameter. Lintvlucht: vergrote binnendiameter door gebruik van smal basismateriaal. Komvormige vliegwiel: het vliegwielblad staa ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 33000 € : 630.3 € : 2530 mm : 6 mm : 6 mm : 4 mm : 190 mm : 5.5 kW : 4250 mm : 1200 mm : 1150 mm : 3750 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AMADA – Press Brake with Automated Robot Line General data: Manufacturer: Amada Capacity: 80 t Working length: 2700 mm Displayed hours: 23029 h Motor power: 9 kW Machine weight: 5750 kg Dimensions (L x W x H): 3400 x 2030 x 2530 mm Technical details: Electric backgauge: yes Maximum stroke: 200 mm Description: Modified complete automated production line consisting of a press brake and industrial robot system. The installation includes a FANUC ArcMate 120iB robot mounted on a rail, equipped with protective enclosure for safe operation. Additional information: External access for robot integration (details to be confirmed). Auction-ID: A7-45351-1

YASKAWA MOTOMAN – Pipe Bending Machine with Robot General data: Manufacturer: Yaskawa Motoman Year of manufacture: 2015 Machine type: Robotic pipe bending system Number of axes: 6 Payload: 50 kg Controller type: Motoman JZRCR-YPP21-1 Weight: approx. 550 kg Technical details: Arm length: approx. 900 – 1000 mm Base dimensions: approx. 1000 x 1300 mm Control system: Yaskawa DX200 (4 kVA) Description: Industrial robotic system for pipe bending applications, equipped with a Yaskawa Motoman 6-axis robot. The system offers high precision, flexibility, and automation capabilities, making it suitable for complex bending operations in industrial production environments. Auction-ID: A7-45351-25

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - / Contact us at -

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 2900 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

Key data: 300 t

For sale is a hydraulic gantry straightening press (H-frame) from the manufacturer Durendus with a maximum pressing force of 300 T. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm and a stroke of up to 600 mm, making it particularly suitable for straightening, tuning and heavy forming work in industrial use. Technical data + information: Hydraulic gantry straightener – H-frame – 300 t 1,500 × 2,000 mm General information - Name: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Press force: 300 T (adjustable) - Distance between the stands: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from the ground: 950 mm - Plunger extension: 200–400 mm - Total weight: approx.  ...

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - / Contact us at -