Manufacturer:
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.

Manufacturer:
(Category: 107-608)

MG 1
sheet metal working / CNC Bending Machines
date: 18.02.2024 add to watchlist
item-No.: 161951369
New in: 2015

used

Seller: IndustrialMachinesNet Ltd
Location: 0 Alcester Land-uk

add to watchlist

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

sheet metal working / CNC Bending Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 163561066
New in: 2013

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

sheet metal working / CNC Bending Machines
date: 15.01.2024 add to watchlist
approved
dealer
item-No.: 161835006
New in: 1987

used

check Seller: Robert Petersen Værktøjsmaskiner A/S
Location: 3520 3520 Farum Land-dk

add to watchlist

Max. bending length 2540 mm Max. plate thickness 2,0 mm Equipped with: Motorized back gauge 2500 mm Segments Service tools etc.

sheet metal working / CNC Bending Machines
date: 02.04.2024 add to watchlist
approved
dealer
item-No.: 162476231
New in: 2023

new

check Seller: Bendingroll Italy srl
Location: Land-it

add to watchlist

4 ROLL BRAND NEW MACHINE 2000X20MM -plate width 2000 mm -plate thickness 20 mm -prebend 14 mm -Top roll mm. 280 -lower roll mm. 260 -Power electric 380/50 Minimum rolling ID 330 mm Capacity 2000 X 20 mm Capacity 1000 x 25 mm -4 rolls hardened very high strength on surface -direct driven rolls rotation with axial planetary gear + hydraulic motor each roll. -conical bending hydraulic tilt angle for plate rolling conical reducers -rerolling system for welded plates to pass automatic welded seams thru -overload protection hydraulic safe operation. -console centralized with electric joysticks -rollers position bending and pre-bend digital readout CNC EVO graphic controller automatic fully programmable 4 axis plate rolling. Auto-calculate programs upon plate data input and test. .dxf files from cad station immediate drawing import and run b ...

sheet metal working / CNC Bending Machines
date: 02.04.2024 add to watchlist
approved
dealer
item-No.: 160798195
New in: 2022

new

check Seller: Bendingroll Italy srl
Location: Land-it

add to watchlist

4 ROLL HYDRAULIC MODEL M2008 EVO_4.0 CNC GRAPHIC CAD-CAM Machine serial number 2022 PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING Capacity -Width of plate: 2000 mm -Thickness of plate rolling 8 mm -Thickness of plate pre-bending 6 mm -top roll 190 mm -lower roll 170 mm minimum rolling shell ID 220 mm -Power 5,5 Hp to run the hydraulic unit Voltage 400/50 – 480/60 -Weight of the machine 3400 Kg Configuration installed Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling Dual pre-pinch, with adjustable force upon the input of plate thickness Conical bending hydraulic attachment - hardened contrast pad. Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. Calibration system f re-rolling of welded shells  ...

sheet metal working / CNC Bending Machines
date: 12.11.2023 add to watchlist
item-No.: 153960648
New in: 2018

used

Seller: IndustrialMachinesNet Ltd
Location: 0 Alcester Land-uk

add to watchlist

Max Bending Length 2250mm Machine is in excellent condition - As New LOW HOURS

sheet metal working / CNC Bending Machines
date: 12.11.2023 add to watchlist
item-No.: 158337767
New in: 2014

used

Seller: IndustrialMachinesNet Ltd
Location: 0 Alcester Land-uk

add to watchlist

• 3000w IPG with Picking • Sorting Unit LSR & Combo Storage H38 • Large Format 3000 x 1500mm • Year 2014 • Servo Electric - High Speed 30 Ton Punching Head • ONLY 535 HOURS!

sheet metal working / CNC Bending Machines
date: 22.05.2024 add to watchlist
approved
dealer
item-No.: 163561067
New in: 2003

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

sheet metal working / CNC Bending Machines
date: 15.04.2024 add to watchlist
approved
dealer
item-No.: 163786595

used

check Seller: Komplett-Konzept Verwertungs GmbH
Location: Land-de
Price: VB 24.370 € add to watchlist

Salvagnini P4-1812 + HTP 2015 + R51 CNC Plate Bending Machine/CNC Folding Machine  Technical Data: Maximum Edge Length: 1850mm Maximum Edge Height: 127mm Maximum blank thickness at 400N/mm²: 2.0 mm (standard version) Maximum angle : +/- 135° (depending on tool) Maximum diagonal of the board and panel: 2150 mm Maximum length of the board : 1995 mm Maximum width of the board and panel; 1500 mm Minimum notching distance on the long side: 265 mm Working height: 1090 mm Compressed air consumption at 6 bar: approx. 2 l/min Cooling water requirement: approx. 2 m³/h Cooling water inlet temperature: max. 20 °C Mains voltage 400V 30 KW Mass without oil filling: approx. 16,000 kg Hydraulic oil filling : approx. 600 l Sound pressure level at Bediernerplatz: 80 dB(A) Area requirement LxWxH: 7055 x 6845 x 2500 mm More items in other sizes - new and used - can be found in ou ...

sheet metal working / CNC Bending Machines
date: 08.05.2024 add to watchlist
approved
dealer
item-No.: 160764859
New in: 2011

used

check Seller: ETAP-Development and engenering
Location: 8000 Novo mesto Land-si

add to watchlist

Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information