cnc automat lathe used for sale

Angled seat valve DG2D3 Serial Number: 500698/11101-19/04 GN/DN: half inch inside/inside Control pressure: 6 bar Operating pressure (PS): 25 bar Fuel consumption: 1.4408 Phone: 05731/79010 Manufacturer's ref.: DG2D31210157OS-HY End Automation GmbH & Co with traces of storage

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Manufacturer GURUTZPE Model A-1200 4G CNC x 6000 Year 2008 CNC FAGOR 8055 TC Capabilities and advances Center height 600 mm. Distance between points 6,000 mm. Cross carriage travel 530 mm. No. of support guides 4 Maximum turning on bed 1,200 mm. Maximum turning on carriage 1,000 mm. Fast Forward X/Z Axes 10 m/min Head Head revolutions 20-1,600 rpm No. of Automatic Head Ranges 2 Main Motor Power 42 kW Head Bar Pitch 150 mm. Turret DUPLOMATIC turret type Turret Positions 8 VDI-50 Tool Size Counterpoint Tailstock shaft diameter 180 mm. Additional equipment C-axis + motorized tools INCLUDED 4 independent jaws plate Ø 800 mm INCLUDED Bezel with 3 supports Ø 50 – 500 mm. INCLUDED Bezel 3 supports Ø 50 – 520 mm. INCLUDED Bezel 3 supports Ø 480 – 930 mm. INCLUDED MORARI Self-Centering Hydraulic Window Capacity 50 – 315 mm INCLUDED MORARI Self ...

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

: 330 mm : 330 mm : 400x330 mm saw band length: 4570 x 34 x 1,1 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 2,35 t dimensions: 2,23 x 2,15 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 460 mm : 460 mm : 460 x 460 mm saw band length: 5450 x 41 x 1,3 mm table height: 800 mm band speed: 20 - 100 m/min total power requirement: 5,5 kW weight of the machine ca.: 3,2 t dimensions: 2,675x 2,15 x 2,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm : 350 x 350 mm saw band length: 4640 x 34 x 1,1 mm band speed: 15 - 115 m/min total power requirement: 5,5 kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 2,2 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 480 mm : 610 x 450 saw band length: 5320 x 34 x 1,1 mm band speed: 15 - 100 m/min table height: 820 mm total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drill ...

Key data: 550 mm

IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - wood - aluminum - bronze - GRP (glass fiber reinforced plastics) - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind hole ...

cutting capacity - round: 300 mm dimensions of saw-band: 3320 x 27 x 0,9 mm cutting capacity - flat: 330 x 260 mm cutting capacity - square: 260 mm Control: evolution work height max.: 870 mm : 40 / 80 mt/min weight of the machine ca.: 1050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Specifications: hydr. Raising and lowering the saw arm Cutting diameter round steel 90°: max. 600 mm Cutting diameter square steel 90°: max. 1000 x 600 mm Cutting diameter round steel 45°: max. 600 mm Cutting diameter square steel 45°: max. 600 x 600 mm Cutting diameter round steel 60°: max. 400 mm Cutting diameter square steel 60°: max. 400 x 600 mm Saw blade length: 9100 x 54 x 1.6 mm Cutting speed: 14 - 74 m/min. CNC control: CEB model Mozart Motor power: 10.5 kW CE mark Dimensions (length x width x height ): approx. 2300 x 4600 x 3350 mm Weight: approx. 5.5 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

saw blade diameter: 130 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 120 mm capacity 90 degrees: flat: 180 x 100 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: flat: 120 x 100 mm engine: 3,3 / 4,4 KW 0: 1400 / 2800 U/min weight of the machine ca.: 1060 kg dimensions: 2,5 x 1,8 x 1,85 m TIGER 402 CNC HR, automatische elektromechanische Vertikalkreissäge für den Einsatz von Hartmetall – Sägeblättern, um Serienschnitte von 45° rechts bis 60° links auszuführen. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min Control: CNC total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-a ...

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 17 - 70 U/min total power requirement: 3,0 kW weight of the machine ca.: t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m SPECIAL PRICE! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer  ...

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m Unused display machine 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In add ...

cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Bandsaw filling machine The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of  ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l

!bargain price!

Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.

turning diameter: 850 mm turning length: 2200 mm control: Siemens 840 D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Chevalier FCL 1840 - Ø 460 x 1000 mm CNC Swing over bed: 460 mm Swing over cross-slide: 230 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 900 mm Max cross travel X-axis: 250 mm Dia of spindle bore: 58 mm Power on the spindle: 7,5 HP Number of speeds: 40 > 2000 rpm Command: Fagor Total power needed: 5,5 kW Length: 2200 mm Width: 1400 mm Height: 2000 mm Weight: 2300 kg

Unicom 6000 groot 5-assig draai- amp; frees bewerkingscentrum (verticaal draaibank met 5-assig freesbewerking) Frezen: - 36 kW vermogen op de spindel - Type: HSK100A - 1 gt; 6000 tpm - 720 Nm - hogedrukkoeling via de spindel 50 bar - Universele frees- en boorkop (2x automatische indexering 2,5°) Draaien: - 70 kW vermogen op tafel - 2 gt; 450 tpm - 25.000 Nm koppel - max swing: dia 2000 mm - max werkstukhoogte: 1330 mm Gereedschapsmagazijn voor draaien en frezen: - Type: HSK100A - 141 posities Tafel: - 3 tafels: Ø 1250 mm / Ø 1600 mm / Ø 1800 mm - automatisch (ont)laden Radio-meetsensor Brankamp botsingsmonitoring Geïntegreerd meetsysteem op de glijbaan Spanentransportband Beeldsysteem met camera en apart scherm Swing over bed: Ø 2000 mm Max longitudinal travel Z-axis: 1000 mm Max cross travel X-axis: 2150 mm Power on the spindle: 70 kW Number of speeds: 2 > 450 rpm (25 ...

Hydraulische bril Swing over bed: 762 mm Distance centre tot centre: 1118 mm Max longitudinal travel Z-axis: 1118 mm Max cross travel X-axis: 508 mm Spindle cone: A2-8 Dia of spindle bore: 117 mm Power on the spindle: 45 kW Number of speeds: 2400 rpm Command: Haas Length: 5490 mm Width: 2415 mm Height: 2794 mm Weight: 10 ton Toolchanger: yes Number of tools: 12 driven positions

Haas ST-25Y Ø 381 x 533 mm CNC Swing over bed: 381 mm Distance centre tot centre: 533 mm Max longitudinal travel Z-axis: 533 mm Max cross travel X-axis: 214 mm Spindle cone: A2-6 Dia of spindle bore: 76 mm Power on the spindle: 22,4 kW Number of speeds: 4000 rpm Command: Haas Length: 3180 mm Width: 1980 mm Height: 1960 mm Weight: 6 ton Toolchanger: yes Number of tools: 12 driven positions

CNC-draai- en freescentrum Type: Multus B300 - 1SW De Multus B300W staat bekend om zijn vermogen om diverse bewerkingsprocessen, waaronder draaien, frezen, boren en tappen, te integreren in één gestroomlijnde bewerking. 2 spindels X-as: 580 mm Y-as: 160 mm Z-as: 945 mm B-as: 225° C-as nr1: 360° (0,001°) C-as nr. 2: 360° (0,001°) W-as: 1000 mm Gereedschapswisselaar met 60 posities: - HSK63A - maximaal 10.000 toeren per minuut - 16/11 kW Staafaanvoer LNS 6.68 HS bis D 70 mm - staaflengte 3 meter Spanentransportband Een ruime selectie aan gereedschappen inbegrepen. Swing over bed: 450 mm Distance centre tot centre: 900 mm Max longitudinal travel Z-axis: 945 mm Max cross travel X-axis: 580 mm Dia of spindle bore: 70 mm Power on the spindle: 22 kW Number of speeds: 38 > 3800 rpm Command: Okuma OSP P200L Length: 4400 mm Width: 2032 mm Height: 2590 mm Weight: 10 ton Toolchang ...

Mazak Slant Turn 35 Ø 460 x 1000 mm CNC Swing over bed: 460 mm Distance centre tot centre: 1000 mm Max longitudinal travel Z-axis: 1028 mm Max cross travel X-axis: 335 mm Spindle cone: A2-6 Dia of spindle bore: 80 mm Power on the spindle: 18,5 kW Number of speeds: 4 > 2200 rpm Command: Mazatrol T32-3 Weight: 5 ton ACCESORIES: Chipconveyor Chuck: Kitagawa Toolchanger: yes Number of tools: 16x

Teach-in lathe Type: BNC-2260XL Swing over bed: 550 mm Swing over cross-slide: 310 mm Distance centre tot centre: 1500 mm Max longitudinal travel Z-axis: 1650 mm Max cross travel X-axis: 300 mm Dia of spindle bore: 82 mm Power on the spindle: 15 kW Number of speeds: 80 > 3500 rpm Command: Fanuc 0i-TC Total power needed: 25 kVa Length: 3690 mm Width: 2225 mm Height: 2050 mm Weight: 4300 kg Toolchanger: yes Number of tools: 8 positions

control: Numeriksteuerung CNC 700 K total power requirement:28 KVA weight of the machine ca.:7,8 t dimensions of the machine ca.:6610 x 2280 x 2235 mm work height max.:1060 mm greates pass round over bed:305 mm spindle bore:82 mm Documents:vorhanden

more tech. Details on request

Tischaufspannflaeche Max Tischbelastung 25 to . groove distance 180 mms table movement 1,000 mms table rotation B axis 360? Aufspannflaeche 1600 x 2,500 mms number of the grooves 9 table overtakes completely in 2012 anew SIEMENS impulses, new MOOR GROVE graduations

Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...