cnc atc used for sale

Manufacturer: Priess und Horstmann, Type: BAT-III-CNC, Year: 1996, Control: B&R + PC, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 190-600, Work piece length min-max mm: 100-1350, Work piece thickness min-max mm: 16-35, 3 Achsensteuerung: 3, Vertikale Bohrstationen von unten: 2, Bandbohrung: yes, Pufferbohren und setzen: yes, Grifflöcher: yes, Sonderbohrung Fläche: yes, Automatic setting up: yes, Drilling supprt from bottom: 2, Drilling supports horizontal: 1, Drilling heads overall: 3, Beschlagstation: yes, Year :1996

1 x CNC bench boring machine in cross-bed design Manufacturer: TOS Type WH13 CNC Year of manufacture 1997 Control: TNC 426 Heidenhain 5-axis X-3500 mm Y-2000 mm Z-1250 mm B-800 mm B-360 Degree Table clamping surface: 1600 x 1800 mm Table load: 12 t Spindle diameter: 130 mm Spindle mount: ISO 50 Spindle speed: max. 1500 rpm Condition: Very good. The machine was only used for repair purposes; no contract manufacturing. Spindle hours: 22,054 Program runtime: 15.661

Manufacturer: Biesse Model: ROVER A FT 1224 CNC Year of Manufacture: 2021 Type of Machine: Numerically Controlled Machining Centre Operating hours: 1238 h Spindle / 42 h Drill heads Weight: 350 kg Power Supply Voltage: 400 VAC Full Load Current: 53 A Number of Phases: 3 Power: 31.20 kW Frequency: 50 Hz Short Circuit Rating: 10 kA RMS Sym Find more here - / Contact us at -

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

Key data: 870 mm, 3000 mm

Turning length: 3000 mm Turning diameter: 870 mm above bed 560 mm over cross slide Weight between tips: 3,600 kg without bezel 4,400 kg with 1 bezel 5,600 kg with 2 bezels Spindle speed: 0 - 900 rpm Spindle bore: 162 mm Control: Fagor Equipped with: - Extra jaw chuck on the rear side of the main spindle - 1 fixed bezel Ø420 mm - 1 rotating bezel - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 tool containers - Coolant and chip container at the rear - Machine documents Country of origin: Spain Motor power: 30 kW Machine weight: 9,000 kg Machine LxWxH: 5.1 x 2.4 x 2.0 mtr.

Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.

A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible.

Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible.

Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.

Sanding length: 650mm, max. sanding diameter: 508mm, center height: 125mm, workhead speed: 1500rpm, max. workpiece weight: 30kg, workpiece swivel range: 30°-90°, tailstock: MK3. Grinding wheel diameter: 508mm, grinding wheel width: 40mm, bore: 203mm, max. internal grinding diameter: 150mm. Machine dimensions X/Y/Z: approx. 4300mm/3100mm/2200mm, weight: approx. 4000kg, control: Siemens Sinumerik 820G. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025.

turning diameter: max. 250 mm turning length: max. 900 mm control: FANUC SERIE 0-T turning spindle: Durchlass 75mm chuck diameter: 250 mm turning speeds: 0-3700 U/min transmission ratio: 2 tool numbers: 12 feed speeds: X/Z 15/20 mm/min quill stroke: 100 mm diameter of quill: 110 mm tool adaptor: MK 4 coolant tank: 130 l weight - pallet system: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A defective CNC spring coiling machine BB Spring (Babbio) is available. Wire thickness range: 3mm-8mm, max. outer diameter: 120mm, wire processing speed: 90m/min, power: 35kW, machine dimensions X/Y/Z: approx. 2750mm/3150mm/2700mm, weight: approx. 4000kg. Including a winch plate for winching left springs and a torsion spring device. The motor and drive of the machine are defective. Documentation available.

Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible.

!bargain price!

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never used productively., - Control Options, - options package, - high-pressure coolant flow, - accessory package

A precise Kuris textile cutting machine including peripheral equipment is available. Cutting height: 55mm, max. cutting speed: 45m/min, positioning speed: 60m/min, working width: 1930mm, machine weight: approx. 4000kg. Including 50kW vacuum pump and tables. Documentation available. On-site inspection is possible.

• Height of centers 750 mm • Distance between centers 5000 mm • Diameter on the bench 1500 mm • Diameter on the carriage 1050 mm • Main engine power 75 Hp • Baruffaldi BA 300 4-position automatic turret • CNC ECS 2400 • Hydraulic chuck • Max. permissible weight between the tips without steady rests kg. 15000 • Max. permissible weight on the platform, cantilevered, with centre of gravity at 300 mm: kg. 3800

Cutting lenght 6000 mm Cutting thickness 13 mm

Mikrosa SASL 5 CNC (Kronos L size), complete overhaul and retrofit Grinding wheel 500 x 610 mm Regulating wheel wheel 400 x 650mm Fixed center Complete mechanical overhaul Complete electrical overhaul No hydraulic movements Application 5-axis CNC controlled in position with digital brushless motors: - working wheel axis motor with Heidenhain linear encoders - Grinding wheel and regulating wheel both with electrical axis movements - rotating axis with digital brushless motor on regulanting wheel - rotating axis with 55kW AC motor with inverter on grinding wheel to regulate number of RPM Protection and fume extraction hood For through-feed grinding and customization possible according to customer needs. Machine refurbished, therefore possibility of testing in our warehouse, CE certification, manuals, 12 months warranty. The machine is visible working in our warehouse in Gussago BS. Mimu Ma ...

Spare parts Siemens 810 GA2 CNC numerical control + Simodrive 611 power supply and drives It can be inspected in our warehouse in Gussago BS Mimu Machine Tools

FOR SALE – AMADA PROMECAM HYDRAULIC PRESS BRAKE Model: ITPS – Length 2000 mm – Force 50 Tons With DELEM DA-65R numerical control ⚙️ TECHNICAL FEATURES: Brand: AMADA PROMECAM Model: ITPS Folding length: 2000 mm Maximum force: 500 kN (i.e. 50 tons) Maximum stroke: 105 mm CNC : DELEM DA-65R Date of manufacture: 03/02/1999 Voltage: 380 V / 50 Hz – Tri Current rating: 125 A Installed power: 11 kW Machine weight: 3450 kg Condition: Good working condition Comes with complete bending tools Photos available: General condition, numerical control, nameplate. Asking price: 12.500 € HT] ✅ Truck-mounted loading capability ✅ Ready-to-work machine

Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

CNC Univ. Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4Machine - Defect - without ControlMachine not ready for operation - electric without function - without CNC controlFabr. No: 03-02 Year of manufacture 19904 axes (X, Y, Z and R)Table clamping surface 1300 x 250 mmCenter width 700 mmCenter height 155 mmGrinding length (X-axis) max. 400 mmGrinding width (Y-axis) max. 260 mmGrinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kWNet connection 380 Volt, 50 Hz, 25 Amp.- CNC control

CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools

A CNC jig grinding machine Hauser is available. Weight: approx. 3000kg, control: ADCOS CNC 400, control option: ASS. Includes a coolant system and various accessories. An on-site inspection is possible.

Inv. Num. : 8559 Type: WDR 1000 CNC Producer: Wagner Created: 2011 Parameters: Control system: Siemens 840D Maximum turning length: 5000 mm Maximum turning diameter over bed: 750 mm Maximum turning diameter over support: 666 mm

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

Key data: 850 mm, 6000 mm

Stock number: 3989 CNC LATHE Manufacturer: GURUTZPE, Type: AUTO M-S CNC 6000 mm Machines NO.: AM-52.8035, Year of manufacture: 2002 Specifications: Max. circumferential diameter 850 mm dia. Turning length 6000 mm Turning over planing slides 500 mm dia. Main motor power 22/28 Kw - 415 V kw Spindle bore 260 mm dia. Control Fagor 8055 FL - TC Fabr. Accessories: Chip conveyance.

Key data: 300 t, 3000 mm

Inv. Num. : 8595 Type: CNC HAP 30300 Producer: DURMA Generated: 2000 Parameters: Control system: DNC 880S Compressive force: 300 t Maximum bending length: 3000 mm Lifting height: 245 mm Weight of the upper tool: 55 kg Reduce tool weight: 310 kg Number of strokes: 3 1/min Machine height: 3100 mm Machine length: 4550 mm Machine width: 2400 mm Machine weight: 16000 kg

CNC horizontal boring machine Type: WH 10 CNC Manufacturer: TOS Year:1991 Overhauled and modernized machine Control: Heidenhain iTNC 530 Spindle diameter: 100 mm Spindle cone: ISO 50 Max spindle speed: 1100 rpm Rotary table: 1000 x 1120 mm Max table load: 3000 kg X: 1250 mm Y: 1150 mm Z: 950 mm W: 630 mm Machine weight: 13500 kg In good condition, under power Find more here - / Contact us at -

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 320mm, Y-axis: 400mm, Z-axis: 40mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible.

Key data: 80 t, 2550 mm, 2050 mm

Safan CNCS 80-2550 - Hydraulic press brake - Incl. various bending tools - Year of construction 1986 Specifications - Capacity: 800 kN - Bending length: 2550 mm - Projection: 250 mm - Passage: 2050 mm - Stroke: 140 mm - Stop time: 140 ms - Stop travel: 600 mm - Operating pressure: 300 bar - Motor power: 5.5 kW - Operating voltage: 400 V - Dimensions WxHxD: approx. 3400 x 2600 x 1300 mm - Weight: 4800 kg

CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture : 1998 Specifications: X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Control : Siemens Sinumerik

Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of Make: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm Clamping surface table: 800x500 mm Spindle revolutions: 20-2780 rpm Levels: 2x continuous Spindle power: 5.5 kW Tool holder: SK40/ISO40 Final drive: 0-2000 mm/min Final drive rapid traverse: 5000 mm/min Quill stroke W: 100 mm Head Swivel: 2x90° Resolution measuring system: 0.001 mm Positioning: +/- 0.02 mm Special features: Protective housing that can be opened, chip tray, quill stroke

A Reform CNC rotary table surface grinding machine is available. Segment head: 560mm, segment dimensions X/Y/Z: 94mm/38mm/180mm, number of segments: 10, segment head speed: 720rpm, rapid traverse: 2m/min. Rotary table diameter: 900mm, rotary table speed: 40rpm, new segment working height: 400mm, control: Siemens 805, operating hours: 55800h. Documentation available. On-site inspection is possible.

Carnaghi Ø 1700 mm CNC Chuck dia.: 1600 mm Max turningdia -- passage: 1700 mm Max hight of workpiece Z-axis: 1000 mm Command: E.C.S CNC 2600 Turret: yes Qty Tools: 7 Coolant pump: yes

X-axis: 3000mm, y-axis: 1200mm, z-axis: 1500mm, touch probe: PH10, probing system: TP 20mm, probe diameter: 4mm, probe length: 25mm, completely overhauled in 2018. An on-site inspection is possible. With documentation.

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible.

CNC portal machining center Type: FVP 50 CNC Manufacturer: TYC Control: Heidenhain X: 1400 mm Y: 200 mm Z: 600 mm Max spindle speed: 15000 rpm Tool holder: ISO 40 Table: 1600 × 1000 mm Max workpiece weight: 4000 kg Passage between columns: 1250 mm Shut hight table-crossbar: 700 mm Machine weight: 9500 kg In good condition, under power Find more here - / Contact us at -

Center height: 230mm, center width: 1500mm, swing diameter over bed/cross slide: 475mm/260mm, max. workpiece weight: approx. 500kg, spindle diameter: 1000mm, spindle bore: 62.5mm, max. chuck diameter: 250mm, travel X/Z: 1330mm/280mm, rapid traverse X/Z: 8m/4m/min, speed: 3150rpm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1600mm, weight: approx. 3300kg, control: Bosch CC 200T. Documentation vorhanden. An inspection on site is possible.

overhauled: 2025 Control Siemens ... Sinumerik ONE Max. workpiece diameter ... 1800mm Table diameter ... 1600mm Max. table load ... 12000kg Max. workpiece height ... 1760mm Axis Z ... 1000mm Plunger Cut... 180x220mm powered tools ... 15 Number of positions in the tool changer ... 15 Axis C ... 360° cooling ... 20bar Main engine power ... 60kW Speed of the clamping table surface ... 2-200 rpm Speed of driven tools ... 8-3300 rpm Motor power of driven tools ... 19.5kW Machine weight ... 27200kg L x W x H ... 5700x7000x5900mm The machine is completely overhauled. More info on request. With one-year warranty.

CNC vertical machining center Type: FVC 120 CNC Manufacturer: TYC Control: Heidenhain X: 2200 mm Y: 1700 mm Z: 900 mm Max spindle speed: 24000 rpm Tool clamping: HSK-A63 Tool magazine: 32 positions Maximum tool length: 300 mm Maximum tool diameter: 150 mm Maximum tool weight: 6 kg Dimensions: 8900 x 7350 x 5100 mm Machine weight: 30000 kg In good condition, under power Find more here - / Contact us at -

Inv. Num. : 8860 Type: BUAJ 30 CNC Producer: JUNKER Created: 2002 Parameters: Control System: FANUC Series 210i-T Maximum grinding diameter: 400 mm Max. sanding length: 630 mm Weight: 2800 kg

TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...

Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020