cnc 4 used for sale

Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Key data: 460 mm, 10

BEVEL GEAR SPIRAL GENERATOR

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Short taper: 6 -Flange: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø mm -Weight: 65 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg

Recon Part number: 524 030 12 20 EX59403800070/42 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

Three-phase motor, electric motor -Power: 10 kW -Speed: 1450 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 560/420/H340 mm -Weight: 124 kg

Recon Part Number: EX52710100083 CCC 5337 950 0011 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Electric motor, three-phase motor -Power: 5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 530/370/H280 mm -Weight: 80 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot damaged, see photo -Power: 3.5 kW -Speed: 1440 rpm -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Price: per piece -Number: 1x available -Dimensions: 470/350/H300 mm -Weight: 62 kg

Recon Part number: 524 050 00 01 X52405100022 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Disc sander, disc grinder, disc sander, edge sander, edge grinder -Drive: 2.2 kW 3000 rpm -Plate diameter: 420 mm -Table size: 50 x 420 mm -Dimensions: 1000/600/H1150 mm -Weight: 210 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 102 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 74 kg

Derinder Weber Type: ASC 460 Engine power : 1.1 kW Connected load : 400V/50 Hz/16 A Weight: 315 kg Dimensions: Width 910 x Length 890 (with bands 1800 mm) Thickness adjustment : from 0 - 15 mm Spring-loaded cutting system Pressure roller automatically adjusts to the cutting height Max. product setting 90mm Feeding and discharge conveyor with quick-release device Cleaning : Disassembly/assembly of all product-carrying parts without tools Integrated crate support Request a quote INTER-WIBA Sp.j. Ul. Krakowska 263 Pl 43-305 Bielsko-Biała NIP PL547-17-47-669 Phone 0048/33 812 58 60

Recon without ring carrier 5 ring grooves Ring grooves Std 6.440.0.160.001.7 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg

Recon with ring bearer 4 ring grooves 6.440.0.160.021.4 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Centrifugal water pump -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 8.3 rpm -Power: 0.25 kW -Diameter shaft: Ø 40 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 700/210/H300 mm -Weight: 41 kg

Recon Type UG8 / TN: H8 Serial: 2023381 640-1440 rpm Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 12 rpm -Power: 0.25 kW -Hollow shaft diameter: Ø 25 mm -Design: Hollow shaft angle -Protection class: IP 44 -Brake -Dimensions: 450/195/H190 mm -Weight: 23.2 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 223 rpm -Power: 2.2 kW -Construction: B5 -Diameter shaft: O 30 mm -Protection class: IP 33 -Price per piece -Quantity: 2 pieces available -Dimensions: 600/270 / H250 mm -Weight: 41 kgpc.

All stainless steel Hopper capacity - 450 litres Two working shafts with paddles Loading unit for 200l trolley Vacuum pump BUSCH - 21 m3 Touch screen MITSUBISHI” Power – 6.2 kW Machine dimensions in mm without loader – 1900/1050/1730(2250) Weight - 950 kg Loading unit dimensions in mm - 1100/1200/2500 Loading unit Installed power - 0,8 Kw

Cutting width: 4 x 60 mm Year of construction: 2015 Productivity: approx. 35-40 Sheets (DIN A4, 70g/m²) Price: on request Security level: P3 Power supply: 380 V/ 2.2 kW Machine is fully functional, after technical supervision.

Specifications Cutting width: 6 x 50 mm Year of construction: 2007-2009 Productivity: approx. 120 sheets (A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s Security level: P3 Power supply: 400 V/4 kW Machine is fully functional, after technical supervision.

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 31 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Diesel forklift hook, front forklift hook, gallows, forklift crane -Load capacity: 4000 kg -For: 600 mm sign -Mast height: 1620 mm -Length to hook: 1200 mm -Arm length: 1300 mm -Dimensions: 1300/1080/H1740 mm -Empty weight: 300 kg

Machine Type: Pulse-Arc Welding Machine Brand: Merkle Type HighPULSE 454 DW Special Edition: Light Grey, RAL 7035 Connection voltage 3 x 400 Volt Adjustment range 20 – 450 amps Duty cycle 50% ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Infinitely variable current adjustment Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Optional equipment ✔ Connection cable to the DV device, 5 mtr. ✔ Slewing ring to the DV device ✔ Mobile wire feeder ✔ Standard control panel in DV box ✔ Lockable cover flap for control panel in DV box ✔ Filter attachment Wire feeder 4-roller drive DV 26 Fuse protection 32 amps Dimensions L x W x H 1,100 x 490 mm x 1,200 mm Weight 140 kg Age 7 years Condition workshop-tested, very good, incl. UVV test report Scope ...

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 4.3 rpm -Power: 0.55 kW -Diameter shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 690/285/H450 mm -Weight: 95 kg

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: BICC vero -Type: Monovolt PK 60 136-44585 -Number: 2x control cards available -Price: per piece -Dimensions: 40/170/H265 mm -Weight: 0.95 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 290/150/H190 mm -Weight: 10.3 kg

Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package

Wire electrode, SG2 welding wire, welding wire -Net weight: 15 kg -Number: 1x package available -Price: per package -Weight complete: 15.6 kg/package

PLC control, digital output -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 451-7LA11 -Number: 5 modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 430-7LA11 -Number: 4x modules available -Price: per piece -Dimensions: 45/195/H300 mm -Weight: 0.9 kg

Transformer, converter, inverter, three-phase autotransformer -Type: 4AV4074-1JA -Technical data: see images -Dimensions: 75/120/H130 mm -Weight: 1.1 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Input: 3 PH 380-460 V - 50/60 Hz -Output: 3 PH : 380/460 V -Number: 1x converter available -Weight: 4.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm -Dimensions: 500/500/H250 mm -Weight: 7 kg