cnc 4 axis used for sale

Used boiling kettle BASTRA, 400 L - Heating type: Electricity - With separate MC 30 control - Boiler capacity: 400 litres The unit has been serviced annually and is in good condition. More pictures and information on request. Visits and test runs are possible by arrangement.

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTec ...

roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Builder: WILLIBALD Model: MZA 4600 Engine: MAN 460 HP Data: L. 10.700 x W. 2.500 mm x H. 3.800 mm Year: 2003 Operative Hours: 7.750 h Hourly Production: 160 m³/h Shredding System: 48 HAMMER Rotor Data: D. 1.000 mm Fuel Tank: 450 L Weight: 16.000 kg NOT OVERHAULED !

roll diameter: 400 mm throat: 390 mm workpiece height: 240 mm saw band length: 2980 mm table surface area: 500x600 mm weight of the machine ca.: 350 kg dimensions of the machine ca.: 650x1100x1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 250 kg coil internal dia.: Ø 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 440 mm stroke: 8-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 63 mm table surface area: 720x750 mm ram surface: 440x280 mm hole in the table: Ø 240 mm table height: 830 mm tool hole in ram: Ø 40 mm weight of the machine ca.: ca. 5,0 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 300-500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard radiators, car radiators, oil coolers, heat exchangers, compressor radiators, hydraulic oil coolers -Manufacturer: AKG, lightweight metal oil/air cooler with filter from Atlas Copco compressor type GA 408 Pack -Type: 1613 2726/653.92 -Pressure: max. 12 bar -Dimensions: 910/400/H700 mm -Weight: 49 kg

Key data: 150 KG, 1356 mm, 2490 mm

Technical data for the shelving system: Shelving system: META Type: CLIP Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,356 mm Number of fields per row of shelves: 01 pieces of 1,300 mm each Number of levels plus ground level: 06 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: blue Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates and gravel bar The stands are pre-assembled 2,490 mm high 640 mm deep 06x shelves, new (second choice) Soil name: MS150-III Material colour: sendz. galvanized Dimensions: 1,300 x 600 x 40 mm max. load per shelf 150 kg with evenly distributed load 04x Levelling plates, used Dimensions: 76 x 58 x 2 mm Weight|Pcs: 0,064 kg Material colour: sendz. galvanized 24x shelf rac ...

Machine type: MIG/MAG welding machine Make ESAB Type LAN 400 Connection voltage 3 x 400 volts Adjustment range 45 – 400 amps Duty cycle 60% ED at 400 amps 80% ED at 355 amps 100% ED at 315 amps Current setting 40 switching levels 3 chokes for the ground cable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feeder 4-roller drive Fuse 20 Ampere Dimensions L x W x H 900 x 700 x 990 mm Weight 192 kg Age approx. 15 years Condition workshop tested, good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 Piece Instruction Manual Warranty: 6 months from the date of delivery List factory price from stock €6,900.00 + VAT Pr ...

Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible.

Welding rectifier, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible.

Shaft height: 400mm, motor type: 3~ motor/ three-phase motor, connection: Δ/Y, rated voltage: 380/660V, rated current: 560/323A, frequency: 50Hz, rated power: 315kW, rated speed: 993/min, mounting arrangement: IM V1, protection: thermal winding protection, power factor: cos φ 0,89, thermal class (WKL): F, protection class: IP54, weight: 2,45t. An on-site inspection is possible, not connected to power.

electric motor, three-phase motor -Manufacture: Siemens Atlas Copco, electric motor from compressor Atlas Copco type GA 408 Pack -Type: 1RA6 183-2AB 51-Z -Power: 30 kW -Speed: 2925 rpm -Shaft: Ø 55 x 110 mm -Design: B5 -Dimensions: 625/480/H395 mm -Weight: 156 kg

Electric forklift Still RX 60-25 with tine width positioner in very neat condition: – Model RX 60-25 – Load capacity 2500 kg – Lifting height 4170 mm – Forks 2200 mm – Fork positioner KAUP 2T160BZA – Sideshift in the fork positioner – Additional hydraulics double – Hydraulics with multi-lever operation – One-pedal drive operation – Superelastic tyres – Fork carriage 6 rollers 1150 mm Form 2A – Cabin with canopy and glazing on the front and roof – Still Safety Light when reversing (Blue-Light) – Lighting system at the front and rear top – Front top left and right work lights – Reversing lights upper right – Panoramic rear-view mirror inside – Driver's seat Grammer MSG 65 – Paintwork Orange / Silver Metallic – Battery compartment for trough 234 – Battery 80V 4PzS 620 Ah – Water refill system – Charger 80V – H1 = 2775 mm mast height – H ...

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.

An MBK horizontal cage welding machine for the production of small square reinforcement cages is offered. Cage diameter: approx. 200mm-1500mm, max. cage length: 4000mm, wire diameter: 5mm-12mm, welding capacity: approx. 100kVA, control: Zoller+Fröhlich. Machine dimensions: approx. 6000mm/2500mm/2200mm, weight: approx. 8500kg. Inspection possible by arrangement.

Technical data for the shelving system: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Overall width: 1,270 mm Total depth: 382 mm Clear span: approx. 340 mm f. Column depth: 400 mm Total height: 20 mm Mesh size: MW 68x35 mm Bearing rod: 20|1.80 mm Weight / piece: approx. 5.33 kg max. load per floor at Evenly distributed load: 100 kg 02x Mesh floor crossbar, used Material colour: sendzimir galvanised Clear width: approx. 1,280 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of de ...

- KITAGAWA 400 mm chuck - Spindle bore 110 mm - Chip conveyor - Feed rate X-Axis 20M/Min - Feed rate Z-Axis 25M/Min - Coolant and Filtration system

Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

LANG Technik Makro-Grip / Quick-Point Clamping System Package 2 pieces of these units available 1x LANG Makro-Grip 125 Vise Type 47205 1x LANG Quick-Point 96 Single Plate Type 45400 1x LANG Quick-Point 96 grid plate type 45763 1x LANG Quick-Point 96 substructure 100 mm type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centres. The system is ideal for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short set-up times and high repeatability. Pros: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast changeover thanks to quick-point zero-point technology Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of use from ongoing production. Viewing possible by arrangement.  ...

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details.

Welding frame dimensions: 450x550mm, applicable films: POF/ PP/ PE/ PVC, max. film thickness: 50μm, weight: approx. 150kg, with Nero shrink tunnel system TBS PACK STA-3528 and documentation. On-site inspection is possible.