129,247 used machines on RESALE, but how to find them? Machine Search
stainless heat shrink tunnel, adjustable temp, aperture 400mm W x 250mm H,
Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!
Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.
used
Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...
Manufacturer: Vollmer, Type: CMS 13M, Year: 1994, Bore diameter: 5 - 50, Max. disk diameter in mm: 200, Min-max external diameter mm: 20 - 525, Min.-max. tooth pitch mm: 26 , Year :1994
CMS automatic package cross cutting system, Type PMI 120 / EL+L+REG, Manufacture year 2014, - Max. pack size 5000 x 1200 x 1200 mm, - Saw motor 9.2 kW, - Touch screen cnc controller, - Waste conveyor
CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...
A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.
This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.
This CMS ESYM M3 1350 was manufactured in 2019. A deburring machine featuring 3 stations, including 1 belt and 2 brush stations, with only 80 operation hours. Ideal for enhancing finishing processes, the CMS ESYM M3 1350 machine we have for sale is a noteworthy addition to any production line. Contact us for more information.
: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 € : 233.28 € : 0.4 - 2 mm : 100 mm : 200 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.
TECHNICAL DATA: Machine for making pallets Usable work surface: 1200 x 1200 mm Motorized loading roller conveyor: 4500 mm Motorized unloading conveyor: 2500 mm + 3000 mm (free-running) Installed power (cutting unit): 9 kW EQUIPPED WITH: Package Holder 01 Lower conveyor belt for wood waste: 8000 x 800 mm + Tiltable end ramp: 2500 mm
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Türkei : 29990 € : 572.81 € : 0.4 - 3.5 mm : 200 mm : 700 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Türkei : 28390 € : 542.25 € : 0.4 - 3 mm : 300 mm : 900 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bar loading magazine for multi spindle automatic lathe, new Manufacturer: Giovanni Cucchi Machine type: Bar loading magazine for multi-spindle Type: CMSP/CMSPF Design: Side loader as surface loading magazine or bundle loading magazine CMSP / CMSPF at a glance: Proven technology - in use for decades The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release. These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode. The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping slee ...
maximum number of results exceeded
please refine your search
150 € 
