37 offers clou

Category: 2200 surplus goods
Latest update: 10.05.2020 No.: 144050378
approved
dealer
New in: new
Seller: country-de Frank Sprengel Metallbearbeitungsmaschinen
Location: 46240 Bottrop

Large item of paints and varnishes in large containers of 25 litres and 30 litres. Multiple times present. Also to be handed over individually, inexpensive! Clou Acocryl Rapid 30 litres - multiple times available (approx. 7 pcs) Cloupur Dilution aromatic-free 30 litres Clou Acocryl - Hardener 30 litres Clou delayer for nito and DD coatings 5 litres 2x present Hesse Lignal UNA-Color Topcoat DB555-9005 2 K-Pur acrylate resin lacquer 25 liters 4 pieces available - RAl 9005 (Black), list price per litre approx. 12 EUR Hesse Unapur topcoat DE 554 2 K-Pur acrylate resin lacquer 25 litres 2x present Hesse Rustic Pickle NCL 5-53552 25 litres Lignal Universal DelayDV 499 Special dilution to extend processing time 25 litres All containers unopened. Complete acceptance or individual acceptance, please against bid. All data in approx. units of measure. Special price

Category: 2422 trucks/other
Latest update: 11.07.2020 No.: 145100334
approved
dealer
New in: 1960
used
Seller: country-de Gassmann GmbH
Price: 79.000 €

; Mileage [km]: 1; Transmission: Automatisch; Accessories: Klimaanlage; Colour: Blau

Category: 109 other metal working machines
Latest update: 23.12.2019 No.: 5306463
approved
dealer
New in: new
Seller: country-at ZIEGLER Maschinen & Werkzeuge
Location: 4661 Roitham
Price: 3.150 €

Blacksmith hammer / air hammer Zeva machines 16 bear Air / forging hammer 16 bear Max 250 strokes/min Working cylinder diameter 90 mm Stroke approx. 170 mm CLOUT approx. 16 bear Anvil is connected to machine Ambosswerzeug can be changed CLOUT and Geschwindegkeit can be controlled with foot switch and hand 1.5 KW, 250 kg If you are interested in air hammers with 25Baer, 40Baer, 55Baer and 75Baer write me a short message!

Category: 701 basic foodstuffs and animal feeds machines
Latest update: 29.08.2019 No.: 139926706
approved
dealer
New in: 2000
used
Seller: country-de LM Dairy Consulting GmbH
Location: albi Fruchtsaft,Berghülen
Price: 78.000 €

C 103 1 Ultra filtration plant, Capacity: 8.000 l/h with 2 tanks standing in the first floor Manufacturer is comp. Koch to filtrate fresh juice without Aroma Manufacturer year is 2000 1 standing Tank, intern was marked with water tank Manufacturer of the tank is comp. Möschle Manufacturer No. 15121, Content 5.000 l one wall, outside sheet is cloudily constructed 1 standing Tank, intern was marked with raw juice tank Manufacturer of the tank is comp. Möschle Manufacturer No. 15122, Content 5.000 l one wall, outside sheet is cloudily constructed 1 centrifugal pump Pu 951 1 Fischer Plate heat exchanger, standing in first floor Type: Eurocal 40PF, manuf. year: 2000 1 Pipe heat exchenger, made out of stainless steel. 1 Hilge pump, int. Pu 30 1 Centrifugal pump, int. PU 32 1 standing tank, intern was marked: filtrate product Manufacturer is Fa ...

Category: 705 pharmaceuticals and cosmetics machines / Cartoning machines
Latest update: 09.05.2019 No.: 135432463
approved
dealer
New in: 2000
used
Seller: country-it INTIMAC
Location: INTIMAC - Fagnano Olona (VA)

Horizontal cartoner with continuous movements with leaflet folder GUK , bar code reader Leatus and coding unit . Product for which it is equipped: PVC trays with ampoules Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2. Cords and pre-attached cases. Clousere: Tuck Automatic trays feeder . Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power vacuum pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar Mechanical speed : max 260 per minute Format range A 20 - 160 mm B 12 x 70 mm C 70 x 230 mm

Category: 107 sheet metal working / Bending Machines
Latest update: 28.06.2019 No.: 136479770
New in: 2000
used
Seller: country-de Kimmel GmbH & Co.KG

HPT2715+P4-2512. LS1° SO). Ll (SO). MLA (SO). Wheel. MMACHNT. CLA+R81+JOBP4. DIARIO+UC1000/2(SO)+Schnellspannsegmente 12x150mm+Schnellspannsegmente 2x40mm+P40FFICE Labour characteristics: Max length of the clout: n board, at the entrance: 2700mm Maximum width of the cloned board, at the entrance: 1500mm Max rotating diagonal of the excluded board: 2700mm Max cutting length: 2500mm Max room of canals above the work table: 127mm Max sheet strength at tensile strength 410 N/mm2:2.00mm Max sheet strength at tensile strength 600 N/mm2:1.25mm Max sheet strength at tensile strength 265 N/mm2:3,00mm Min. Sheet strength: 0.50mm

Category: 107 sheet metal working / CNC Pressbrakes
Latest update: 23.11.2019 No.: 133484570
approved
dealer
New in: 2012
used
Seller: country-tr Pyramid Mühendislik
Location: 34087 ISTANBUL, Atikali mh. Sarayagasi

Capacity 400 ton Bending Lenght 6100 mm Distance between cloumns 5100 mm Throad debth 450 mm CNC Controller Cybelec Modeva 10S

Category: 824 pre press: software
Latest update: 21.03.2019 No.: 123538208
approved
dealer
New in: 2014
used
Seller: country-de 3p Vertriebsgesellschaft mbH
Location: D - Brandenburg

A quantum leap to new functionaltools This new version of XMF, the internal technologies have undergone a series of upgrades to meet the more complex requirements of high-speed digital printing and the optimization of traditional CTP disk production. VDP support and database XMF workflow v5.5 supports both the most innovative (PDF/VT) and established (PPM) In addition, a new database is being used in the XMF software to optimize the processing of high data volumes in variable data printing and thus to ensure the production of fast-running digital printing presses. MIS integration Fujifilm received CIP4 certification some time ago. This strengthens the complete integration of an MI system and XMF v.5.5 gemaess CIP4 specifications. In addition, new JDF tools are built into the process to convert incoming MIS statements into JDF-compliant control commands. automatic 3D proof XMF v ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587681
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 262.040 €

: 3.060 x 1.530 mm : 2,0 kW : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presettings f ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587683
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 372.230 €

: 3.060 x 1.530 mm : 6,0 kW : 25 mm : 12 mm : 15 mm : 10 mm : 12 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presettin ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587686
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 458.450 €

: 3.060 x 1.530 mm : 8,0 kW : 25 mm : 15 mm : 20 mm : 12 mm : 14 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presettin ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587687
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 324.320 €

: 3.060 x 1.530 mm : 4,0 kW : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presetting ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587688
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 295.580 €

: 3.060 x 1.530 mm : 3,0 kW : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presettings f ...

Category: 604 textile finishing machines
Latest update: 16.07.2020 No.: 145089833
approved
dealer
New in: 1993
used
Seller: country-de FEYEN Maschinen GmbH
Location: ab Standort Spanien

Working width: 2400 mm Roller width: 2600 mm pressure: 50 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 400 dia Roller covering: Stahl, verchromt Heating - upper roll: Elektro/Dampfheizung Swimming roll - dia: 350 / 435 mm Roller covering: Flexroll-Manchon Clouth speed: 80 m/min Weight: 15 to dimensions of the machine ca.: 5,0 x 6,0 x 2,5 m • 2-Bowl-Rolling/Finishing Calender with one Swimming-Roll (S-Roll), • Steel roll newly chrome plated • Inlet, working platform in front of machine, with metal and seam sensor, • 2 cooling rools at outlet side • SOCHOR-Winding at outlet, • Sleeve as replacement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146587690
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 544.680 €

: 3.060 x 1.530 mm : 10,0 kW : 30 mm : 20 mm : 25 mm : 15 mm : 20 mm : 3.060 mm : 1.530 mm : 160 mm : 3.048 x 1.524 mm : 10.750 mm : 6.210 mm : 9.350 mm : 6.000 mm : 2.800 mm : 3.350 mm : 1.700 mm fiber laser HESSE HD-F made by DURMA The shuttle table is positioned in one line with the machine to allow best possible accessibility for optional loading and unloading systems. As option the machine can be equipped with linear drive for X- and Y-axes for even higher speed and accuracy. The machine consists of the following components: capsuled cutting room with safety glass -X-axis with massive gantry-drive by rack and pinion -Y-axis by rack and pinion shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touch screen  (Made in Germany!) - technology and cutting parameter data bank with presetti ...

Category: 706 beverage machines
Latest update: 21.01.2020 No.: 23447602
approved
dealer
New in: used
Seller: country-de VINO TEC e.K.

1 x sparkling wine filling system used, plant 1, output approx. 5,000 bottles / h, sparkling wine filling line Direction: li-re & re-li, decorated for 0.75 ltr. Champagne & 0.75 ltr. Nymphenburg Palace & 0.75 ltr. Schlegel, champagne bottles, which includes: 1 x new levers for glass Kettner with Demag chain hoist, task table, 3-rail and a drain band with separation, 1980. 1 x steriliser straw, type Sterima ST45, 2-channel rinser, Shell version, BJ. 1997, 5,000 b / h 1 x sparkling wine pressure filler KHS Rola-tronic, 45 filling stations, BJ. 1988, 8,000 b / h 1 x level control HEUFT, type: Spectrum, BJ. 1989, 10,000 b / h 1 x sparkling wine Cork Orientierer Neri, type: Alfec B/90, BJ. 1995, 6,000 b / h, with large elevator to the storage/loading 1 x 4 Sektkorker Bertolaso, type: Delta 506 S, BJ. 1999, 8,000 b / h 1 x 4 Polykorker Bertolaso, type: Kappa, BJ. 1980, 5,000 b / h 1 x Aggraf ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161145
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 291.300 €

: 3.100 x 1.550 mm : 3,0 kW : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 3.100 mm : 1.550 mm : 125 mm : 3.048 x 1.524 mm fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The automatic shuttle table is positioned on the lenghtside of the machine to keep the total lenght as compact as possible. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) - technology and cutting parameter dat ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161146
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 152.600 €

: 3.048 x 1.530 mm : 1,0 kW : 8 mm : 4 mm : 4 mm : 2 mm : 4 mm : 3.048 mm : 1.530 mm : 125 mm : 3.048 x 1.524 mm : 575 kg fiber laser HESSE HD-FS made by DURMA The HD-FO is our compact entry level model. Control, laser source and cooler are integrated into the system to minimize the total dimensions. The manually extandable table is moved laterally out of the machine for loading and unloading. The cutting head has an automatic focus adjustment.  It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) laser source IPG YLR (Made in Germany) cutting head DURMA with automatic focus adjustment liquid cooler for cutting head and resonator CAD/CAM software LANTEK to program and optimize utilization of material (nestin ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161150
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 371.300 €

: 3.100 x 1.550 mm : 6,0 kW : 25 mm : 12 mm : 15 mm : 10 mm : 12 mm : 3.100 mm : 1.550 mm : 125 mm : 3.048 x 1.524 mm fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The automatic shuttle table is positioned on the lenghtside of the machine to keep the total lenght as compact as possible. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) - technology and cutting parameter  ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161151
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 93.850 €

: 1.500 x 3.000 mm : 170 A : . 4.650 ca mm : . 4.300 ca mm : . 1.920 ca mm : 5.100 ~ kg HyPerformance plasma power source Hypertherm XPR 170 CORE with ",true hole", technology automatic gas console plasma ignition consol  command torch height control CNC control BECKHOFF Lantek software with auto nesting control of filter unit by CNC  remote control diagnostic by Ethernet spare parts starting kit cutting plate alignment function user manual in GERMAN and ENGLISH Options: suction with filter €     17 000,00   moreprice for VWI instead of Core €       4 050,00   moreprice for Optimix instead of Core €       8 150,00   Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request. working area: 1.500 x 3.000 mm plasma source: Hypertherm XPR 170 CORE max. thickness:  ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161153
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 321.300 €

: 3.100 x 1.550 mm : 4,0 kW : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3.100 mm : 1.550 mm : 125 mm : 3.048 x 1.524 mm fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The automatic shuttle table is positioned on the lenghtside of the machine to keep the total lenght as compact as possible. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) - technology and cutting parameter d ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161156
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 170.400 €

: 3.048 x 1.530 mm : 2,0 kW : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3.048 mm : 1.530 mm : 125 mm : 3.048 x 1.524 mm : 575 kg fiber laser HESSE HD-FS made by DURMA The HD-FO is our compact entry level model. Control, laser source and cooler is integrated into the system to minimize the total dimensions. The manually extandable table is moved laterally out of the machine for loading and unloading. The cutting head has an automatic focus adjustment. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) laser source IPG YLR (Made in Germany!) cutting head DURMA with automatic focus adjustment liquid cooler for cutting head and resonator CAD/CAM software LANTEK to program and optimize utilization of material (nesting)  ...

Category: 307 rubber machines / Calenders
Latest update: 16.07.2020 No.: 145089861
approved
dealer
New in: 1998
used
Seller: country-de FEYEN Maschinen GmbH
Location: ab Standort Frankreich

Working width: 2400 mm Roller width: 2600 mm pressure: 50 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 400 dia Roller covering: Stahl, verchromt Heating - upper roll: Elektro/Dampfheizung Swimming roll - dia: 350 / 435 mm Roller covering: Flexroll-Manchon Clouth speed: 80 m/min Weight: 15 to dimensions of the machine ca.: 5,0 x 6,0 x 2,5 m • 2-Bowl-Rolling/Finishing Calender with one Swimming-Roll (S-Roll), • Steel roll newly chrome plated • Inlet, working platform in front of machine, with metal and seam sensor, • 2 cooling rools at outlet side • SOCHOR-Winding at outlet, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161159
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 256.300 €

: 3.100 x 1.550 mm : 2,0 kW : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 3.100 mm : 1.550 mm : 125 mm : 3.048 x 1.524 mm fiber laser HESSE HD-FS made by DURMA When the requirement is to laser cut with high performance and precision, though the available space is limited, it is a task for the model HD-FS. The control unit is integrated in the machine to keep the overall dimensions as low as possible. The automatic shuttle table is positioned on the lenghtside of the machine to keep the total lenght as compact as possible. It makes the machine very economical, fast and easy to handle. The machine consists of the following components: capsuled cutting room with safety glass lateral shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!) - technology and cutting parameter dat ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 147161160
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 95.550 €

: 2.000 x 4.000 mm : 170 A : . 5.650 ca mm : . 4.900 ca mm : . 1.928 ca mm : 5.900 ~ kg HyPerformance plasma power source Hypertherm XPR 170 CORE automatic gas console plasma ignition consol  command torch height control  CNC control Lantek software with auto nesting  marking system  control of filter unit by CNC  remote control diagnostic by Ethernet  spare parts starting kit  cutting plate alignment function  user manual in GERMAN and ENGLISH (sample photo) Options: suction with filter €     17 000,00   moreprice for VWI instead of Core €       4 050,00   moreprice for Optimix instead of Core €       8 150,00   Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request. working area: 2.000 x 4.000 mm plasma source: Hypertherm XPR 170 CORE max. thick ...

Category: 604 textile finishing machines
Latest update: 16.07.2020 No.: 145089868
approved
dealer
New in: 1979
used
Seller: country-de FEYEN Maschinen GmbH
Location: Lager Krefeld

Working width: 2200 mm Roller width: 2400 mm pressure: 50 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 350 dia Roller covering: Stahl, verchromt Heating - upper roll: Gasheizung Swimming roll - dia: 350 / 400 mm Roller covering: Flexroll-Manchon Clouth speed: 80 m/min Weight: 15 to dimensions of the machine ca.: 5,0 x 6,0 x 2,5 m • 2-Bowl-Rolling/Finishing Calender with one Swimming-Roll (S-Roll), • Inlet, working platform in front of machine, with metal sensor, • SOCHOR-Winding at outlet, • Sleeve as replacement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 705 pharmaceuticals and cosmetics machines / Cartoning machines
Latest update: 29.06.2020 No.: 142307664
approved
dealer
New in: 2010
used
Seller: country-de Hauser Maschinen e.K.

continuous cartoning machine, folding carton format range min. 30x15x65 mm (AxWxH), max. 80x90x155 mm (AxWxH), blister format range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), insert/booklet feeder (inserts are automatically removed from the stocking boxes/trays and provided to the insert feeder), prepared for retrofitting a GUK brochure folder, cloud m600 advanced ink jet for the application of the variable data and code closure as plug-in Glue closure by means of Nordson PROblue 4 hot glue device as Tamper-Evident protection, folding carton outlet in Pago Pagomat 6/2 labeling system for applying labels to the top of the folding carton (vignette, Bollino), connection voltage 400 V/230 V/50 Hz, electrical fuse 20 A, electric connection value 10 kW, compressed air requirement 6-10 bar, machine base area approx. 7289 x 2041 mm (LxB), machine height approx. 2254 mm, net machine we ...

Category: 603 knitting machines
Latest update: 16.07.2020 No.: 145089895
approved
dealer
New in: 1981
used
Seller: country-de FEYEN Maschinen GmbH
Location: ab Standort

Working width: 1400 mm Roller width: 1600 mm pressure: 40 t Pressure line: 250 N / mm Number of rollers: 2 Stück Upper roll: 320 dia Roller covering: Stahl, verchromt Heating - upper roll: Thermoöl Swimming roll - dia: 355 mm Roller covering: Flexroll-Manchon Clouth speed: 30 m/min Weight: 10 to dimensions of the machine ca.: 3,0 x 4,0 x 2,5 m • Inlet side with bearing cap for small skeins, • At outlet with Sochor arm and hydr. center winder, with thermic oil heating, Make: TOOL-TEMP, Switzerland, Type TT-380. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 104 grinding machines
Latest update: 16.07.2020 No.: 145091692
approved
dealer
New in: 1965
used
Seller: country-de Kemmerich Werkzeugmaschinen GmbH
Location: ab Lager Monheim am Rhein

rotary table diameter: 1300 mm grinding height: 750 mm grinding head - power requirement: - kW max. workpiece diameter: 1500 mm workpiece height max.: 750 mm boring diameter: 100 mm workpiece weight: 1200 kg table - swivable +/-: 3 ° rotary table dia.: 1300 mm total power requirement: ca. 60 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 5,5 x 3,5 x 3,2 m Rotary table Universal Surface grinding machines with rotating cloumn and three grinding headstocks for internal-, external and face grinding. with - swiveling rotary table 3° - oil cooling Partly overhauled by Reform-Rabenseifner - DRO Acu Rite - new lubrictaion system for each head - change of wear parts etc machine accuracy approx 10-1my The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 402 packing machines
Latest update: 29.06.2020 No.: 128669817
approved
dealer
New in: 2010
used
Seller: country-de Hauser Maschinen e.K.

Complete packaging line for sticks (small hose bags) consisting of Merz SPM-50 5-lane shape, Filling and closing machine for sticks incl. dosing for liquid and semi-solid pharmaceutical products by means of 5 peristaltic dosing units for a dosing range of 0.5 – 100 ml., currently set up for sticks with a width of 24 mm, embroidery length adjustable from 40 to 140 mm, filling volume 2-15ml , with corresponding format parts sticks with a width of 17 to 35 mm can be processed, nitrogen gasing, S Siemens S7-300, multi-lane themotransfer printer for batch labeling (printing range 55x40 mm per capita), OCS belt control scale with bad ejection, automatic transfer by means of 3 Pick & Place robots into a Brunner VCL-180 S vertical cartoning machine, Folding carton size range min. 20 x 20 x 60 mm (AxWxH), max. 150 x 100 x 200 mm (AxWxH), number of sticks per folding carton from 1 to 40 pieces,  ...

Category: 705 pharmaceuticals and cosmetics machines
Latest update: 29.06.2020 No.: 137356922
approved
dealer
New in: used
Seller: country-de Hauser Maschinen e.K.
Location: 06779 Raguhn, Gewerbegebiet 2

Blister line for ampoules in "squeeze packs" consisting of Uhlmann UPS 3 Blister machine, max. drawing depth 28 mm, colour camera system for testing ampoule presence, Label and ring code, in 2010 with new machine control and touch panel by Uhlmann retrofitted, Uhlmann C100-LA horizontal cartoning machine with automatic Blister stacking, magazine for feeding booklets, etc., GUK brochure folder from stack, Laetus Argus Code reader for folding carton, package leaflet (both sides) and Package leaflet presence in folding carton, Garvens S2 belt control scale with bad ejection, maximum load 400 g, Pago System 214/221 adhesive labeling machine for application of Safety labels (Tamper Evident) on folding cartons for product safety and protection before counterfeits, 2 label dispensers to provide folding cartons with warranty closure labels. The machine is fitted with an addit ...

Category: 816 presses: flexo and rotogravure
Latest update: 05.08.2019 No.: 138749333
approved
dealer
New in: 2006
used
Seller: country-pl TM Machinery
Location: 51-60 Wroc?aw, Handelsmana 18/1
Price: 320.000 €

ref. F83 Bielloni Magiflex 8 year 2006, CI, gearless machine, max web width 1320 mm, max. print width 1200 mm, 8 clour flexo, print repeat 300-800 mm, print sleeve cylinders (22 sets 300-550 mm), video control Eltromat, automatic register control, kiss-contact system for automatic adjustment of print unit pressure according machine speed, FIFE web tension control after unwind unit and before CI, electric drying, in production, price: 320 000 EUR FCA

Category: 834 post press: perfect binders
Latest update: 10.05.2018 No.: 124136345
approved
dealer
New in: 1984
used
Seller: country-de 3p Vertriebsgesellschaft mbH
Location: D - Brandenburg

Tischnutmaschine with grooving tool Working width 50 cm, CLOUT 10-12 sheet depending on paper thickness Investment of levels of 380 volts 1 pouncing tool 1 Groove tool 1 tool for filing holes and tear-off perforating 1 tool for WireO binding 4x4mm; as new

Category: 103 milling machines / CNC Bed Milling Machines
Latest update: 09.03.2020 No.: 134070483
approved
dealer
New in: new
Seller: country-de CNC-Wahab Werkzeugmaschinen Handel & Service
Location: 49762 Lathen, Schubertring 8

DENVER model CNC-1050 Spindle drive type inverter vari Tischabmasse 1520 x 430 (59,84 "x 16,93") T-slots (number X width x distance) 3 x 16 x 80P Cloumn table surface 80 ~ 550 (3.15 "~ 21,65") Stroke of the XYZ axis 1050 x 500 x 500 (41.34 "x 19,69" x 19,69 "") Coils run 140 (5.51 "") Spindle spindle taper NT-40 Spindle speed 3600 RPM Shaft diameter 110 (4.33 "") Spindle nose to table 70 ~ 670 (2.76 "~ 26.38") Spindle Center to table surface 515 (20,28 "") Motor spindle motor 7,5 kw (5 HP) XY axis motor 0,85 kW Z axis motor 0,6375 (0.85 kW) Coolant motor 1/8 HP Measuring machine size 2230 x 2000 x 2200 (88 "x 79" x 87 "") Packaging size 2500 x 2100 x 2500 (95 "x 83" x 100 "") N.W. / G.W.. 3200/3400 kg Standard colour RAL 7035 light grey + blue RA ...

Category: 206 presses
Latest update: 15.07.2020 No.: 147231959
approved
dealer
New in: used
Seller: country-de Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Veneer press Make: ORMA Type: NPC/DIGIT 6/95 new Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Cylinder-Ø: 70 mm Lift & max. press opening: 400 mm Total pressure: 90t Digital control Electro-heater 21 kW for thermo-oil User interface: clour touch-screen Siemens Optional: - Parallelism control by sensor - Elkom heating plates (instead of thermo-oil) - Water heating (instead of thermo-oil) - Stroke 650mm (instead of 400mm)- Mylar protection foil

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146687466
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 390.310 €

: 2,0 kW : 8 mm : 4 mm : 6 mm : 170 mm : 120 x 120 mm : 150 x 100 mm : 8.500 mm : 3.000 mm : 4000 / 6000 mm : 2 D : 185 mm fiber laser HESSE HD-TC made by DURMA The machine consists of the following components: - capsuled cutting room with safety glass - CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!)    technology and cutting parameter data bank with presettings for common metals - laser source IPG YLR 2000 (Made in Germany!) - autofocus-cutting head PRECITEC with integrated and adjusted sensor technics and - motorizedfocus position adjustment (Made in Germany!) - liquid cooler for cutting head and resonator - CAD/CAM software LANTEK to program and optimize utilization of material (nesting) - remote maintenance by LAN connection - manual unloading table - positioning laser Options: exhaust unit with filters  € 12.460,- automatic unloading t ...

Category: 107 sheet metal working
Latest update: 16.07.2020 No.: 146687467
approved
dealer
New in: new
Seller: country-at HESSE+CO GesmbH
Location: Wiener Neudorf
Price: 322.210 €

: 2,0 kW : 8 mm : 4 mm : 6 mm : 170 mm : 120 x 120 mm : 150 x 100 mm : 6.500 mm : 3.000 mm : 2 D : 185 mm fiber laser HESSE HD-TC made by DURMA The machine consists of the following components: - capsuled cutting room with safety glass - CNC graphic control SIEMENS Sinumerik 840D with touchscreen (Made in Germany!)    technology and cutting parameter data bank with presettings for common metals - laser source IPG YLR (Made in Germany!) - autofocus-cutting head PRECITEC with integrated and adjusted sensor technics and - motorizedfocus position adjustment (Made in Germany!) - liquid cooler for cutting head and resonator - CAD/CAM software LANTEK to program and optimize utilization of material (nesting) - remote maintenance by LAN connection - manual unloading table - positioning laser Options: exhaust unit with filters  € 9.110,- automatic unloading table  4 m  € ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)