cleaning used for sale

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

Keg Washer/Filler - Second Hand 2 head keg washer filler complete with beer carbonator manufactured by NT Teknik Type NM Keg 1-1 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

connected load frequency: 230 V battery: 24V / 200Ah Brush diameter: 510 mm tank capacity: 50 / 50 Liter weight: 90 kg range L-W-H: 1,0 x 0,6 x 1,0 mm RTE Floor Cleaning Machine: - with drive system - battery charger - working capacity 2000 m²/h - suction width: 850 mm - cleaning width: 510 mm - fresh/wastewater tank volume: 55/60 L The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026.

Sheet Metal Cleaning Basin Fresh Manufacturer : Fresh Type : Spritzmatic Exterior Dimensions : W: 122cm D: 33cm H: 86cm Interior Dimensions : W: 102cm D: 29cm H: 70cm Cleaning for 60x40cm and 60x80cm wide trays on casters Details see picture   

KD Putz Sheet Metal Cleaning Machine 58cmProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 58cm wide 2-edge trays on the short sideThe KD Putz Sheet Metal Cleaning Machine is a special machine used in bakeries and kitchens to clean baking trays. This machine facilitates the removal of dough and baking residues from the trays to ensure a hygienic and clean working environment. The sheet metal cleaning machine from KD Putz can handle various

KD Putz Sheet Metal Cleaning Machine Bakery / GastronomyProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 60 x 40 cm trays, 2-edge on the short sideBack outputOuter dimensions: width 91.5 cm, depth approx. 74 cm, height 84 cmDetails see pictures.

Machine Type: Ultrasonic Cleaning Device Make: Finnsonic Type: MC-360/III Year of Make: 2002

KD Putz Sheet Metal Cleaning Machine Avidi 800 Product description Manufacturer: KD Putz Type: Avidi 800 Condition: used, functional, bakery condition Material: Stainless steel Cladding with emergency stop switch on castors, mobile For 58 x 78 cm trays, 2-edge on the short side Back output Power connection: 230/400 Volt / 4 A / 1.1 kW Exterior Dimensions: width 112 cm, depth approx. 92 cm, height 84 cm For details, see pictures.

Elma XTRAST Elmasonic 9738 Ultrasonic cleaning device In a very good condition!

Sheet metal cleaning machine KD Putz for 78 cm traysProduct descriptionManufacturer: KD PutzCondition: used, functional, baker's conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobileFor 58 x 78 cm trays, 2-edge on the short sideBack outputExterior dimensions: width 115 cm, depth approx. 88 cm, height 104 cmDetails see pictures.

Krones Lavatec Year of Make: 1999 Output: 24,000 bph. Retrofit: 2014

Sheet metal cleaning machine Reini 60 â Product description âœ" Manufacturer: Metall- und Apparatebau GmbH âœ" Type: Reini 60 âœ" Year of construction: 1990 âœ" Condition: used, tested, Baker's condition âœ" Material: stainless steel âœ" Cleans with rotatable brushes âœ" suitable for 3 edge sheet metal sizes  60 x 80 cm âœ" With 2 parking brakes âœ" Outside dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment) Details see pictures

Klinger bottle washing machine also for swing-top bottles. Machine can be planned and set up by us. We can also supply additional conveyor technology

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : II A.M.K 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edged baking and perforated baking sheets. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Krones bottle washer built in 2001 676-039 6000 bottles/h 0.2l-1.0l bottles Machine will be available in December 2026

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : AVIDI 800 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edge baking and perforated trays. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Semolina plastering machine MIAG DK 30 drive left, lighting, aluminium frame, 1 spare frame.

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

GENERAL Project No.: 905713 Quantity: 1 pcs. Manufacturer: GEORG RENDER Type: W 90 TH4 WSKAT PLC Control: Siemens SIMATIC HMI Year of Make: 2017 Condition: Used machine PARTS CLEANING Cleaning medium: Water-based Front loader Max. weight per load 120 kg GENERAL TECHNICAL DATA Total power requirement 26 kVA Machine weight approx. 750 kg NOTE We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non-binding and to check the data in detail during an inspection.

An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible.

Sheet metal cleaning machine KD Putz Tubur 600 for 2 edge trays - Sheet metal cleaning machine with brushes - Manufacturer: KD Bakery Equipment - Type: Tubur 600 - 1.1 kW

A top-loading batch cleaning system Render is available. Pump capacity: 140l/min, cleaning bath fill volume: 130l, max. operating temperature: 130°C, load capacity: 120kg, connected load: 16kW, machine dimensions X/Y/Z: approx. 1350mm/1200mm/1350mm, weight: approx. 350kg. Includes a transport cart. Documentation available. An on-site inspection is possible.

Cleaning machine, Fabr. GM Gera, Type: Arcade, for 24,000 bph, control range 7,600 - 26,400 bph, 25 bph, cage pitch 95mm, chain pitch 140mm, with Siemens S7 control

Pressure washer, Nilfisk Food Ecolab XP Foamer F&B, for, foaming, disinfecting and rinsing, year of construction 2022, for wall mounting, without hose and spray lance, Connection 230V, dimensions LxWxH approx. 60x50x25cm, weight approx. 38kg, good used condition, fully functional

Cleaning machine, Fabr. GM Gera, type: Arcade GEK2.1RV1, for 4,000 bph, 9 b/row, with 0.5 lt NRW bottle, cell pitch 95mm, with pre-soak, caustic bath 1+2, hot water bath 1+2, cold water and fresh water spraying, year 2007

Cleaning machine Fabr. Krones, Lavatec type: KES-2-2-212/22-80, built in 1999 for 0.33 lt Vichy, 0.35 lt. AFN bottle, 0.5 lt NRW and EURO bottle with Siemens Simatic Touch Panel

Cleaning machine, Fabr. PAC, type: CB 16-1 R-7,5 LII, for 6,000 bph, up to 1 lt. bottles, 16 b/row, year 1994, L: 7350mm x W: 2800mm x H: 2800mm Weight approx. 8 to, disassembled, for sale.

Spout-hand wash combination, stainless steel

Manufacturer: BvL Model: Rotocleaner RC 1950 RW 2T Year of Manufacture: 2008 Type of Machine : Cleaning System Operating hours: approximately 18,505 hours Key Features - Dual-tank system: separate wash tank and rinse tank for superior cleaning results - Wash basket diagonal of 2319 mm, allowing cleaning of large and small components - Maximum usable length: 1545 mm - Maximum usable width: 1545 mm - Maximum usable height: 1000 mm - Load capacity: 750 daN (approximately 750 kg) - Operating voltage: 3 x 400 V, N+PE, 50 Hz Wash Tank Specifications - Tank capacity: 825 litres - Electric heating: 24 kW - Spray pressure: 4.5 bar - Wash pump: FHE 40-200/75 GLRD SiC/SiC-Viton, 7.5 kW - Level control: LIQUIFANT FTL 260 - Coarse filter: 2 mm - Detergent dosing: Membrandosierpumpe Alpha 1001 Rinse Tank Specifications - Tank capacity: 825 litres - Electric heating: 18 kW - Spray pressure: 3 ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! incl. Clean room - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm  ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

Powerful spray cleaning for a wide range of parts Also for heavy workpieces From lightly oiled to heavily soiled Further data on request

Linomat LN2 washer with filler, 2 active cleaning heads, Fully automatic, fully electronic KEG interior cleaning and filling machine, for different KEG sizes 15-50 L KEG, for containers 20 ltr. - Performance 35 -40 containers / h The Keganlage runs on Schlankkeg- basket fitting. Build in 1992, very good condition and fully functional, tested by Seegräber GmbH

An HGH ultrasonic cleaning system is available. Chamber dimensions X/Y/Z: 600mm/500mm/400mm, basket dimensions X/Y/Z: 570mm/470mm/290mm, usable volume: approx. 120l, tank volume: 160l, ultrasonic power: 1200W. Documentation available. An on-site inspection is possible.

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

Washing system for trolleys and rack trolleys ELIONA / CERTEL, type: WR100.125.190 -in good condition- - For frames max. 1,000 x 1,250 x 1,900 mm - Boxes max. 600 x 400 x H 360 mm - Steam, hot water - Heating type: electric - El. Connection: 3x 400 V + N + PE, 50 kW Visits and test runs are possible by arrangement.

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

Sheet metal cleaning machine AWS Reini R60L Automatic Feed For sheet metal dimensions 98 x 58 cm For 2, 3 and 4 edge trays Dry cleaning Dimensions LxWxH: approx. 80 x 60 x 105 cm High output with up to 200 sheets/hour Easy operation, care and maintenance Movable on castors (with hold-up)

Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels., Additional title: Keg spraying and keg brushing, Max. capacity: 300 Kegs/h, Capacity keg filling plant: 110 Kegs/h, Voltage: 220/380 V, Frequency: 50 Hz, Length: ca. 2200 mm, Width: ca. 1500 mm, Formats: 30-litre and 50-litre kegs, EU format, with PU jacket, Features: Spray jets, high-pressure pump, brush station, label discharge

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row

Cleaning machine used Visually and mechanically good condition Fully functional Without warranty _ Purchased as seen Video in operation can be sent on request. Payment of the machine at pick-up or in advance by bank transfer Invoice Amount plus VAT

Cleaning system ROLL RSB 0060-028-0540-03, year of construction 2017, S/N K05385, aqueous cleaning agent, cleaning cell, 2 rinsing cells, drying cell, circulating belt (vacuum pump missing)

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg