cleaning used for sale

Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles Dirt cutter for robots with arc welding machine Operating voltage: 24 volts DC/DC Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatics Compressed air connection: 6 to 8 bar - Milling drive via air motor ( Desoutter) - pneumatic cutter infeed movement (lifting movement) - replaceable cleaning cutter - gas nozzle fixation via pneumatic prism clamp Space requirements: L x W x H 240 x 230 x 380 mm Net weight: 8 kg good condition The milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until dismantling.; used

Stainless steel sink, Fabr. Frank

Jeros 6015 TRAY CLEANING MACHINES

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

Description: Power 1.5 kW, water cooling, wavelength 1070 nm, cleaning width 50 mm, power supply 220 V. 1. Metal surface rust removal/carbon steel rust removal/weld seam cleaning/metal surface paint removal/steel pipe paint removal/aluminum plate surface cleaning oxide film, , 2. Laser cleaning technology refers to the use of high-frequency high-energy laser pulses to irradiate the surface of the workpiece, The coating layer can instantly absorb the focused laser energy, causing the surface oil stains, rust spots or coatings to evaporate or peel off instantly. It is a high-speed and effective cleaning method for removing surface attachments or surface coatings, and the laser pulse with a short action time, Will not harm metal substrates under proper parameters. Laser cleaning is a new technology based on the interaction effect between laser and matter. Different from traditional mech ...

Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

Part cleaning system cleaning system part cleaning machine cleaning equipment Metal cleaning equipment Kliro Centrimat L 15 kg Year of construction 1998 Panel Mount ACP protected 6000 with internal conveyor Centrimat C3 manual The original price of this machine was 25,000 euros. The machine requires no additives to clean, but the parts are cleaned by the centrifugal force. Device 2.300 kg Cabinet 50 kg Dimensions: Footprint unit without Cabinet 1200 x 1200 mm Height 1680 mm Cabinet 650 x 650 mm Height 1960 mm KLIRO Anlagenbau Marienheide No. 5700145 VEM motors GmbH Wernigerode K11R 132 No. 88 Rothstein protection systems GmbH Marienheide Siemens COROS OP3 RITTAL-Werk Rudolf LOH GmbH Herborn AE 1360 No. 134617 RITTAL-Werk Rudolf LOH GmbH Herborn AE 1556 No. 039556 Maschinenfabrik bihler Halblech type B-4 No. 22732 Machine is fully functional.

doubel side brushing unit Brand: OMMA Type:SPX_1400 New machine with transversal cleaning system Technical data: Useful working width about mm 1.350 Maximum working thickness mm 150 Adjustable speed mt/min 5~25 Working level (adj. +/- 20mm) mm 905 Brush rotation speed about mt/min 92 Suction connections Ø mm 120 Installed power about kW 1,2 Color Ral 7035 Command side (in front machine, looking at the entrance) Right Standard voltage v 400/50/3 Technical equipment: - Top & bottom transversal cleaning system by means of motorized belts with special nylon brushes. - Adjustable system to compensate the natural lengthening of the brushes, increasing the lifetime. - Mechanical devices through the brushes to remove dust allowing the best elimination/aspiration. - Special cleaning system for the finest particles, with adjustable atomizers and separate tank for specif ...

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Nozzle tube system(s) three-dimensional Basket diameter 600 mm Basket load 100 kg Usable internal height 370 mm incl. accessories for CE certification: - Direct drive for the washing basket - Weekly timer - Water deficiency protection - Chip/particulate filter with bath cover plate - Vapour extraction Automatic level replenishment: - automatic level supplementation Function blowing off / drying: Pulse compressed air blow-off three-dimensionally Lye care: Disc oil skimmer – discontinuous oil discharge – For floating/demulsifying oils Bag filter system type Sʺ With 2 pieces of pressure gauge on the bag filter housing ʺAfterʺ Filtration Emptying and cleaning the system (occupational health and safety): Pumping device/flushing of the tank bottom Hose/nozzle in aluminium/plastic Option – AM execution: AM version for additional manual cleaning (high ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Hörger SKU 1500 Artificial Grass Cleaning Device Artificial Grass Cleaner SKU for sand-filled or granule-filled artificial grass. The artificial turf cleaner consists of a cleaning attachment in the front attachment and a tank-pump unit in the rear attachment. The rear tank is divided into a fresh water and a dirty water area. The PTO-driven high-pressure pump sucks in the fresh water and transports it via hoses to the front of the front cleaning attachment. Due to the large working brush diameter of 500 mm, the machine can be used for three different working procedures are carried out. 1. Maintenance cleaning: Depending on weather conditions, every 14 days to monthly; Coarse dirt and dust that has settled in the meantime as well as pole abrasion are removed. 2. Intensive cleansing with loosening: About every 3 months; Coarse dirt is removed, fine particles consis ...

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, floor stand for cleaning cloth roll with waste stand -Type: W1 -Roll width: up to approx. 450 mm -Number: 7x cleaning roll holder available -Price per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/piece

Cleaning brush Brand: TecnoWood Type: SPD The cleaning brush unit SPD has been studied to clean the surface of the boards. The filaments of the brush remove the dust to assure a deep cleaning. The big flexibility is assured by the modularity of the solution, which is the greatest strength of all solutions of TecnoWood. Technical Data Standard equipment - Unit with a double brush - Electric lifting of the top brush with digital readout of the working position - Manual lifting of the bottom brush with digital readout of the working position - Customised length of the brush - Customised fixing brackets - Width of the brush 50 mm. - Automatic system to detect the thickness, for brushes units integrated into a line with PLC - Brushes speed rotation max. 90 mt/1? Optional equipment - Optional equipment - Blowers? unit to be applied at the exit side of a ...

Automatic tube cleaning machine "End-Cleaning" for cleaning the tube ends after internal coating

Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • Ma ...

Zippel crankshaft cleaning system Zippel Crankshaft cleaning system L x W x H = 3520 x 520 x 700 mm Item location: 42859 Remscheid Further cleaning systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

A Krones glass bottle filling line Equipped with a bottle vacuum system Performance today. 14,000 bottles of wine per hour Type filler: K 323-152, year of construction 2000 Bloc formation mechanically with a Krones Rinser machine Variojet Type K 562-235 with motorized higher adjustable filler upper part and with manual locking for VK- VKS- VC- VVHL and VVHK filling system 7 different wine bottles were bottled (Sample see photo) with manual cullet and filler exterior spraying, manually controlled. with disinfectant spraying device for vacuum fillers with 2 nozzles including control with set of sterile air filters with steam sterilization unit Rinser Medium 1: Water, temperature 50 to 55 °C with collecting tank with circulation pump, equipped with Container Level Control and Temperature Monitoring Medium 2: with saturated steam heating Medium 3: Sterile air with 2 ...

Electric scrubber drier, floor cleaning machine DEAWOO type DAFL50A Fabr. No. 22DW01702ALE01-00028 Year of construction 2022 Theoretical area performance 2000 mª/ h Working width 510 mm Cleaning brush 510 mm Brush speed 175 rpm. Suction lip width 850 mm Tank volume Pure water: 50 litres Tank volume Waste water: 50 litres Noise pollution 66 dBa Climbing capacity 2% Battery voltage 24 Volt, 100 AH - Battery charger 24 Volt- Battery 24 Volt , 100 AH - one cleaning brush - two separate tanks - without drive, the device is pushed by hand Dimensions L x W x H 1275 x 850 x 1350 mm Empty weight 160 kg very good condition, as good as new; used

Manufacturer: Lancer (Getinge) Model: 1300 UPSS Year: 2008 Type: Laboratory washer-disinfector / dishwasher Application: Cleaning / washing of laboratory glassware and instruments Maximum power : 13,5 KW Accessories: grid baskets, injector baskets and mixed baskets Multi-stage direct injection cleaning. Cleaning: mechanical, thermal and chemical. Multiple programs. Interior volume: 160 L Maximum load: 51 KG

Exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter, exhaust air purification system, filter cleaning system, electrostatic precipitator -Manufacturer: KMA, exhaust air cleaning system filter cleaning system type SR2200 -Rated power: 0.65 kW -Individual components: see photos -Dimensions: 1220/645/H1335 mm -Total weight: 196 kg

Description: Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 liters Weight 160kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm

Max. basket weight:200 kg No. of washing chambers:1 No. Of tanks for washing:1 Small parts - cleaning system BOUS "CeBeCo" SECURUS "D" size 2 "S" from workshop, hardly any operating hours, 1A-TOP-CONDITION Usable dimensions: approx. 800 mm diameter Useful height: approx. 450 mm Operating weight: max. 200 kg with evenly distributed load Nozzles: flat jet Pump: approx. 3 kW 2x heating: approx. 2x 6 kW Thermostat: digital Insulation: Terodem heat insulation Detergent filling capacity: approx. 200 l Power requirement for fan: approx. 0.25 kW Power requirement for drive: approx. 0.12 kW Power requirement for emptying pump: approx. 0.6 kW Voltage: 230/400 V, 50 Hz PE/N Control voltage: 24 V Loading height: approx. 900 mm Labelling: German 1. VAPOUR EXTRACTION The unit is equipped with a vapour extractor, consisting of an electric low-pressure fan with intake connection. The scope of delivery  ...

FOR SALE ALFA LAVAL ECOSTREAM OILY WATER CLEANING COMPLETE SYSTEM TO WHOM IT MAY CONCERN; WE VE COMPLETE SYSTEM ALFA LAVAL ECOSTREAM OILY WATER CLEANING SYSTEM AT OUR STOCK SYSTEM RUNNING HOUR IS ONLY 3HRS . IT IS BRAND NEW . , EPC 50, 15 PPM Alarm and all accessories PLS FIND DETAILS ON BELOW ALFA LAVAL ECOSTREAM ART-NO. 585420-01 AL R SA 52658 MADE IN ITALY 60 HZ FREQUENCY 440V SEPARATOR BRPX 307 TGD-71 ELECTRICAL BOOSTER EH-W25 L1500 YOB 2014 EX STOCK READY TO TRANSPORT IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH SU. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm

Hinst continuous cleaning system Continuous washing systems from the manufacturer Hinst are designed to treat series parts in large quantities with the highest purity requirements at the same time. Appendices No. 04.333 Year of construction 12.2004 Dimensions approx. WxDxH: 3.80 x 4.30 x 3.80m Incl. - 6 baskets: Basket dimensions: 48,5x48,5x H26cm - Roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored with a value of € 3,500 these are included in the purchase price. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Cleanming and Degreasing Plant Part washing system - Part cleaning system - Degreasing system Manufacturer: Reintec Previously used detergents / detergents: acetone, caustic soda Previous use: Cleaning of cast resin molded parts System and workpiece holders stainless steel Spray washing process 3-chamber system Inner chamber: washing chamber with nozzle system Outer chambers for reciprocal assembly of washing baskets Mounting systems or baskets for various workpiece shapes and dimensions available Dimensions total approx. 600 x 130 x height 200 cm

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Nozzle filter with pneumatic cleaning and suspended material filter used Manufacturer: Total filter area approx.m 2 Hose filter each approx.m 2 filter area with pneumatic cleaning Particulate matter filters Gea MultiClean KLH 1/1-re Floating fabric filter 6011 Filter class H11 Operating volume flow: 1000 m3/h too low operating pressure: + 2000/-5000 daPa Run-out with cell wheel lock Total dimensions approx. 2400 x 2400 x 4700 mm The filters were used in a carbon production plant. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Ultrasonic cleaning system FiSA VST 2000/P, YOC 2014 - Ultrasonic power: 8.4 kW - Component weight max.: 5000 kg - Volume: 2000 l - Heating capacity: 51 kW - Internal useful dimensions L/W/H: 1600/ 1000/ 1250 mm - Space requirement (W x D x H): 12 x 3.2 x 2.1 m - Total power: 60 kW - Condition: very good details Mould cleaning for plastic injection moulding, extrusion, elastomere, die casting, core boxes, moulds; well-kept facility, was hardly in use

1-door GMP compilant cleaning machine for commercial cleaning and drying of glassware, container and vessels, machine parts, hoses/tubes etc. Max. usable cabine dimensions: 670 mm (height) 610 mm (width) 750 mm (depth). unit is as good as new.

FLOOR SCRUB CLEANING machine DAEWOO DAFL50A NEW, NEVER USED, YOM 2022 COMPLETED BY EL. BATTERY AND CHARGER NETTO WEIGHT 160 KG TWO AVAILABLE LOCATION - POLAND WE HAVE ADDITIONAL TWO SIMILAR CLEANING MACHINES KREMER KR-FL50A IN NEW CONDITION AND THE SAME PRICE.

Stomach and paunch cleaning machines is designed for mechanical cleaning of beef, pork, and sheep stomachs. The machine is made of stainless steel. 2 Pieces available. Dimensions: L: 1000 mm x W: 900 mm x H: 1500 mm Machine can be screwed to the floor. Capacity about 75 litres. Programable time of work.

Cavecchi Pulitrice F Cheese cleaning machine Serial: 51 2004, cheese cleaning machine, side and bottom brushes, 3Ph

Single-chamber spray cleaning system FRANKE SRF-1000 l-RRS - Year of construction 09/2001 - 3 tanks -Stainless steel - Thermal insulation of the system - Spraying system arranged on all sides - Spray pipes with nozzle loading - Thermostatic heating control - Overheating protection for heaters - Level monitoring - Steam extraction fan - Removable filter basket - Lifting door with electromechanical drive - PLC control - SRF with special usable height and sliding door as well as transverse transfer carriage - Cleaning medium: water-soluble, non-flammable cleaners - Usable dimensions 1450x1450x1000 mm – 1000 kg - Electrical connection 3x 400 V 50 Hz + PE + N - Compressed air connection 6 bar - Fresh water connection 1/2" - Transport data System 3050x2200x3000 mm – 3000 kg Cart 1100x1150x300 mm – 45 kg Transverse sliding device 3800x1200x930 mm – 60 k ...

- sheet metal cleaning machine for 2-, 3- and 4-edge sheets; smooth and perforated - for baking trays with 58cm width (58x58cm, 58x78cm, 58x98cm) - Dry cleaning with integrated brush lubrication - high output with up to 750 sheets per hour -Operator panel with status displays in national language -Daily and total piece counter, maintenance interval display -easy operation, care and maintenance -movable on castors with locks

Sheet metal cleaning machine KD plaster for 78cm sheets - Metal cleaning machine for 2 edge sheets - Margins on the short side - for 58x78cm sheets - 400 volts - mobile on wheels

Load capacity: 100kg, weight 1760kg, layer use: 1-layer. EURO standard baskets can be used: Length/width/height: 600mm/400mm/288mm. Spray cleaning and flood cleaning possible.

Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2018 Extras: Ultra-fine filters Draining pump Oil separator More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix T3/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T3 / 70 WSA Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 62 A 400 V Year of construction: 04/2015 System weight: 1100 kg Extras: Ultra-fine filters Draining pump Oil separator More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Extras: Ultra-fine filters Draining pump More items - new and used - can be found in our shop! International shipping costs on request!

Cleaning machine/rack trolley washer/dishwasher/chamber washer Year of construction 2002 with 5 different washing programs with drive-in ramp Rack trolley cleaning system 1000x600mm complete stainless steel

• Contact web cleaner for cleaning coated (gloss pressed) paper, film and foil with low dust load. • Web speed max. 300 m/min • Web width max. 650 mm • Cleaning of the web double-sided, polymer rollers • 2x static unloader bars with control unit • With frame (formerly from an Uhlmann UPS 4 blister machine) • Connection 230V/50Hz

Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg