clean room used for sale

The electric self-propelled machine has two rotating brushes it also works with chemicals and doubles as a wet vacuum cleaner with a rubber blade. Manufacturer: CLEANFIX Accommodating size: 1300 x 1100 x 1100 mm Rotating brush diameter: 2 x 250mm Electrical supply voltage: 24V from 2 lead-acid batteries

Hot washing machine with lifting door in good technical and optical condition. Fully insulated, interior completely stainless steel. Programmable washing and rinsing programs, extraction, circulating air drying, oil separator. Basket diameter 850 mm, diagonal 1000 mm. Payload 700 kg, maximum workpiece height 700 mm. 2 pieces transport trolley with 2 pieces stainless steel washing baskets.

Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

S/s boot cleaner, dimensions: 2000 mm x 900 mm x 1330 mm.

Cleansorb for chemical binding of the process gas H2S Type: CS200BS Built: 2010

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

Metal cleaning plant make BUPI-CLEANER type 5 HFabr. -No: 8022 Year 1980Inside dimension: 1500 x 1500 x 1000 mmBasket size: 1250 x 1250 mmWater content: 300 - 500 lMax. Heating temperature: 70 °Heating time of the car wash approx. 1 hr.Spray pressure: 4.3 barCleaning time approx. 10 - 15 min.Drive power: 7.5 kWHeating power: 9.0 kWDimensions L x W x H: 2000 x 2000 x 2400 mmWith- Time thermostat- Flap door- Access car with 2 basketsused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Connected load: 1.25kW, length: 1900mm, width: 840mm, height: 2400mm, operational hours counter: 5751h.

Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Length mm: 1000 Width mm: 1900 Height mm: 3500 Transport size L x W x H: 2,5 x 1,0 x 3,5 Number of spindles: 1 Condition machine : Not complete Photos/film available: Photos available for more information, please mail us: salestecfort.nl

Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly the CLEAN PACK brand capper features a single head configuration specifically designed for applying T caps Importantly this technical choice allows for precise cap placement which is essential for ensuring the integrity of the bottled product Moreover the cap distribution system operates through vibration mechanisms an effective method for sorting and feeding caps to the capping device without interruptions Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly the production speed of the capper is adjustable via an inverter This allows fine control of the capping rate tailored to the desired production rhythm Consequently this adjustment capability proves particularly useful in dynamic production environments where requirements can quickly change Configuration and Safety Additionally t ...

Clean Air System AOP Desktop, type DT 500 DeskAir PHI, For your workplace, whether in the office or in the home office, cleans the air and improves the indoor climate., - Length of the UV-C tube: 5 but has the, - power of 2.5, - Flow rate of the integrated fan:, - without blower, - Voltage: 230 V incl. voltage converter, - (integrated in the desktop) and 12 V plug, - Power: 12 volts 1 amp, - Case material: polymer, -, power: Room volume/ capacity: 74 m³ in 24 h, Dimensions / weight: Dimensions L x W x H: 152 x 76 x 300 mm, weight: 1 kg

Description: 680 l/h, 5.5 HP 165 bar max 170 bar max 60 C° , 16.5 Mpa Max 17 Mpa 105 dB Approx. Onsite Dimension. (l x w x h): 1,100 x 550 x 700 mm, weight approx.: 60 kg

We offer 4 system rooms with L-shaped ceiling Basic dimensions: 
 Room 1: 2,750 m x 5,015 m; H = 2,880 mm, left H = 2,705 mm, Room 2: 9,300 m x 4,910 m; H = 2,880 mm, left H = 2,705 mm, 
 Room 3: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm, Room 4: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm. The walls are made of double-skinned, powder-coated sheet steel filled with mineral wool, equipped with 6 mm float glass. They offer a sound insulation of approx. 25 dB at 1,000 Hz and are also partly equipped with air slots for an air passage of 300 cubic meters/hour. The surface is powder-coated. The ceiling is a sheet steel cassette ceiling (distance DTR = approx. 1,018 mm) made of perforated cassettes, surface powder-coated, grid 625 x 625 mm, cassettes clamped, profile rails not visible. Thermal and acoustic insulation by 35 mm mineral wool, highly compacted, alu ...

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -pneumatically operated -Year of construction: 1996

Multifunctional punch, punch, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatic: operated -Piston stroke: 20 mm -Pressure capacity: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of construction: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

1. Cleanroom incl. ventilation technology a Manufacturer: REUKO Klima-Service GmbH & Co. KG b. Type: individual solution c. Date build: 2012 d. Use: idle operation for several months, reconstitution of medicinal products in 2 clinical trials (including cytostatics) e. Clean Room Classes: D (for Isolator environment) f. Area/rooms: Slice and laboratory (with separate air lock for goods) g. Control: Individual solution by ELREST (DDC-Controller) 2. Insulator a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, 3. Particle Analyzer a. Manufacturer: KM-Optoelektronik b. Type: PCSS c. Date build: 2010

Volume flow: 7650m³/h, heating output: 21kW, connected load: 87kVA, weight: 960kg.

Volume flow: 3000m³/h, coolant capacity: 20kg, coolant output: 43.8kW, weight: 1.27t.

Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation.

Manufacturer: Schuko, Year: ca.1990, Control: yes, Supply air filter covers: 1, Heizmedium : Warmwasser, Splashback dry: yes, Length max mm: 3000, Width max mm: 1600, Number of spray booths: 1, Supply air system: yes, Hand spraying stations: 1, Absaugfläche m²: ca.4, Zuluftgerät kW Leistung 1: 89,6, Heating agent warm water: yes, Engine power kW: ca 4, Ceilings for incoming air: 1, Year :ca.1990

Manufacturer: Reinraumkabine, Control: yes, Supply air filter covers: yes, Heizmedium : Warmwasser, Electronic control board: yes, Working height: 3200, Wet splashback: yes, Length max mm: 3000, Inner hight mm: 2890, Sliding doors: 1, Number of spray booths: 1, Number of evaporation booths: 1, Zuluftfilterdecke m²: 25, Floor extraction: no, Supply air system: yes, Grösse L X B X H mm: 18000 X 7000, Radial fan: 2, Ceilings for incoming air: 1, Heating register: 1, Supply air system: yes, Sliding doors: 1,

Manufacturer: Berkmann <CRLF>Zuluft und Abluft<CRLF>Spritzstand, Year: 2009, Control: yes, Heizmedium : Gas, Heat recovery: yes, Electronic control board: yes, Number of spray booths: 1, Number of evaporation booths: 1, Abluftventilator m³/h: 14000, Underfloor exhaustion: yes, Supply air system: yes, Dachausführung: yes, Zuluftgerät kW Leistung 1: 232, Exhaust air device: yes, Ex-installed lamps: yes, Heat recovery: yes, Rückwärmezahl %: 38, max. Wärmerückgewinnung kW: 77, Overall heating output: 160, Year :2009

Manufacturer: Holtkämper und Adoplh, Type: Reinraum Spritzkabine, Year: 1996, Schleifraum m²: yes/, Lackierraum m²: yes/, Trockenraum m²: yes/, Zuluftfilterdecken: 2, Wet splashback: 2, Length max mm: 4000 X 2100, Sliding doors: yes, Number of spray booths: 1, Number of evaporation booths: 1, Underfloor exhaustion: yes, Hand spraying stations: 2, Radialventilatoren: 5, Exhaust air device: yes, Ex-installed lamps: yes, Air entry ° C: 12, Air exit ° C: 28, Supply air fan:: 3, Engine power kW: 7,5/3/1,1, Heating medium hot water: yes, Ceilings for incoming air: 2, Sliding doors: yes, Year :1996

Description: With enclosure 1300 x 1300 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 1,300 x 1,400 mm, weight approx.: 150 kg

Esta Eurosog W/H 80.299 Industrial vacuum cleaner As a powerful industrial vacuum cleaner, the EUROSOG-W is suitable for coarse, dry, fine and free-flowing dusts. The AC version is designed for sporadic use during cleaning work in workshops. Its smooth-running rollers provide the industrial vacuum cleaner with a high degree of mobility. The spacious dust collection container has a capacity of 80 litres. Thanks to the patented tipping device, the dust can be disposed of effortlessly. Areas of application for EUROSOG industrial vacuum cleaners: AC version for sporadic use For dry, coarse and fine dusts For cleaning processing machines For general cleaning work (e.g. workshop floors) Can be used in many industries (e.g. wood and metal industry) Metal industry Construction industry Wood industry Chemical Printing industry Flocculation industry Cleaning industry Ha ...

Nozzle cleaning machine, torch cleaning station Gas nozzle cleaning device for MIG MAG robot welding systems BINZEL type BRS Ident. No.: 8310260 Device No.: 4212 Year of construction: 1998 Welding nozzles Dirt cutter for robots with arc welding machine Operating voltage: 24 volts DC/DC Cutter diameter inside: 8 mm Cutter diameter outside: 12 mm Stroke movement: 50 mm Pneumatics Compressed air connection: 6 to 8 bar - Milling drive via air motor ( Desoutter) - pneumatic cutter infeed movement (lifting movement) - replaceable cleaning cutter - gas nozzle fixation via pneumatic prism clamp Space requirements: L x W x H 240 x 230 x 380 mm Net weight: 8 kg good condition The milling machine for single-wire welding torches comes from a robot welding cell and worked without any problems until dismantling.; used

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

Stainless steel sink, Fabr. Frank

2 pcs available can also be used for other rooms of the food industry Dimensions: Also single for sale per piece 500,00 Euro

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: On work bench: Working bench: Length: 1600 mm Width: 700 mm Height: 850 mm Rear drive: SIMONET Headstock with reduction gear Driving plate Set of collets: W20

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm Taper in tailstock:: 2 MT longitudinal: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Knee-operated reversing switch Clutch and brake Lamp Quick closing attachment Chip protector Toolholders

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: W25 number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Feeds: Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2200 mm Width: 800 mm Height: 1650 mm Various accessories: On work bench: Working bench: Length: 2150 mm Width: 770 mm Height: 900 mm Driving system for milling and grinding attachment 3-jaw chuck diameter: 100 mm Set of jaws hard Drilling tailstock Chip protector

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 675 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 6 from: 270 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 2000 mm Width: 700 mm Height: 1500 mm Various accessories: Working bench: Length: 2660 mm Width: 770 mm Height: 900 mm Rear drive Foot switch Drawer(s) Belt-tensioning device for milling/grinding att. Drilling tailstock Drill chuck

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Quick closing attachment Drill chuck Turret carriage

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 70 mm Distance between centres: 315 mm Swing over cross-slide: 85 mm Swing over bed: 155 mm Spindle hole: 12 mm Spindle speeds: number (steps): 12 from: 135 rpm up to: 2500 rpm Machine´s weight about: 150 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Sheet metal base Rear drive Lamp Belt-tensioning device for milling/grinding att. 3-jaw chuck diameter Set of jaws hard Set of collets Drilling tailstock Rotary centre Set of centres Drill chuck Hand rest

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Spindel nose for collets: W 20 Taper in spindle: Threaded Spindle speeds: number (steps): 24 from: 45 rpm up to: 3100 rpm Pitch of leadscrew: 4 mm Diameter of leadscrew: 40 mm Taper in tailstock:: 2 MT Feeds: number (steps): 8 length: from: 0.020 mm/r up to: 0.30 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.50 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1375 mm Width: 670 mm Height: 1210 mm Various accessories: 3-jaw chuck Quick closing attachment Quick change tool: MULTIFIX Set of collets: W 20 Tool holder with elements Lamp Drilling tailstock Clutch and brake 2 drawers

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Base-mounted type: Belt-tensioning device for milling/grinding att. 4-jaw chuck diameter Quick closing attachment Drill chuck Hand rest Fixed steady

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 600 mm Swing over cross-slide: 177 mm Swing over bed: 340 mm Swing in gap Spindle hole: 40 mm Taper in spindelstock MK: 5 Taper in spindle: Camlock: D 1-4" Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 5 MT Spindle diameter: 60 mm Feeds: number (steps): 48 length: from: 0.015 mm/r up to: 0.35 mm/r Frontal: from: 0.015 mm/r up to: 0.35 mm/r Rapid motion: 4 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.70 HP Total power required: 6.30 HP Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1730 mm Width: 970 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Coolant system Quick closing attachment Set of steel holders Lamp Drilling tailstock