We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,247 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 600 x 320 mm -T groove width: 12mm -T grooves: 5 pieces -Equipment: rotatable, pivotable, tiltable -Foot mount: 325 x 190 mm -Number: 2x tables available -Price per piece -Dimensions: 800/300/H240 mm -Weight: 70kg
used
Taper clamping bushes, clamping bush -Type: 1615 -Bore: 30 mm -Dimensions: Ø 57/38 mm -Number: 13x available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.41 kg
used
Clamping bush, hydraulic clamping bush -Type: ETP-EXPRESS R-25 -Flange: O 58 mm -Flange width: 14 mm -Shaft: Ø 30 mm -Shaft length: 35 mm -Bore: 25 mm -Dimensions: Ø 58/H49 mm -Number: 4x available -Price: per piece -Weight: 0.27 kg/piece
used
Clamping and support unit, quick release, tensioner, 2 pcs DR. MATZAT S & CO. GmbH 50 x 40 mm Clamping range ( height lower lip ): 50 - 54 mm Width: 40 mm Fastening screw: M12 x 1.75, Length: 30 mm New ! Dimensions ( Tensioner ): 165 x 40 x 80 mm Dimensions (packaging): 260 x 210 x 125 mm
used
ISO-KF clamping ring, for elastomer seal, 30 pieces PAGUS DN 10 / 16 ISO-KF nominal diameter: 10 / 16 mm length: 61 mm width: 16 mm diameter: 44 mm adapter material: aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 61 x 44 x 16 mm dimensions ( packaging ): 210 x 130 x 50 mm
used
ISO-KF clamping ring, for elastomer seal, 25 pieces PAGUS DN 20 / 25 ISO-KF nominal diameter: 20 / 25 mm length: 72 mm width: 16 mm diameter: 53 mm adapter material: aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 72 x 53 x 16 mm dimensions ( packaging ): 210 x 150 x 60 mm
used
ISO-KF clamping ring, for elastomer seal, 25 pieces PAGUS DN 32 / 40 ISO-KF Nominal diameter: 32 / 40 mm Length: 90 mm Width: 16 mm Diameter: 70 mm Adapter material: Aluminum Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 90 x 70 x 16 mm dimensions ( packaging ): 210 x 180 x 80 mm
used
ISO-KF clamping ring, for elastomer seal, 10 pieces PAGUS DN 50 ISO-KF nominal diameter: 50 mm Length: 113 mm width: 20 mm diameter: 92 mm adapter material: aluminum Other quantities on request ! used, checked ! Dimensions ( single clamping ring ): 113 x 92 x 20 mm Dimensions (packaging): 210 x 120 x 100 mm
used
ISO-KF clamping ring, for elastomer seal, 2 pcs CA DN 50 ISO-KF nominal size: 50 mm length: 101 mm width: 17 mm diameter: 75 mm adapter material: stainless steel ( 316 ) other quantities on request ! used, tested ! dimensions ( single clamping ring ): 101 x 100 x 17 mm dimensions ( packaging ): 110 x 100 x 40 mm
used
ISO-KF clamping ring, for elastomer seal, 2 pcs PAGUS DN 50 ISO-KF nominal diameter: 50 mm length: 101 mm width: 17 mm diameter: 80 mm adapter material: stainless steel Other quantities on request ! used, checked ! Dimensions ( single clamping ring ): 101 x 95 x 28 mm Dimensions (packaging): 110 x 100 x 60 mm
used
ISO-KF clamping ring, for elastomer seal, 2 pieces PAGUS DN 50 ISO-KF 031106-3 Nominal diameter: 50 mm Length: 102 mm Width: 18 mm Diameter: 80 mm Adapter Material: Stainless Steel ( 304 ) Other quantities on request ! used, tested ! dimensions ( single clamping ring ): 101 x 95 x 18 mm dimensions ( packaging ): 110 x 100 x 40 mm
used
Clamping table, T-slot table, rotary table, milling machine table, NC rotary table -Manufacturer: MAHO, clamping table: milling machine table from CNC machining center MAHO MH 800C -Table surface: Ø 600 mm -T grooves: groove width 14 mm, groove spacing 64 mm -Dimensions: see photos -Total dimensions: Ø 630 x 555 mm -Weight: 365 kg
used
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg
used
Clamping drive, clamping force generator, electric WMW EDU I80 DR speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 K 4 E 0,55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! Dimensions: 280 x 130 x 170 mm
used
Clamping bracket STANKO clamping surface: 400 x 400 x 64 mm bridge width: 30 / 88 / 90 / 87 / 33 mm Groove width: 18 / 32 mm Groove depth: 35 mm Mounting surface: 400 x 270 x 35 mm 2x slotted hole: Ø 20, Length: 120 mm used, tested ! 85 KG (heavy duty) Dimensions: 400 x 400 x 270 mm
used
Clamping actuator, clamping force generator, electric, with reversing switch WMW EDU I80 F/M1 speed: 80 rpm torque ( adjustable in 8 steps ): 20 - 120 Nm engine: KMRB 71 G 4 E 0,75 kW 1380 RPM 220 / 380 V 3AC Hollow Shaft: Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1.25 used, tested ! dimensions: 280 x 130 x 190 mm
used
Key data: 600 mm, 400 mm
Article number: 27-04-002 Manufacturer: Flange table Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x500mm Weight: approx. 120kg Table clamping surface: approx. 600x400mm Swivel range: via hand crank Left: approx. 90 degrees Right: approx. 90 degrees Clamping T grooves: 3 pieces Groove width: approx. 18mm T grooves: approx. 125mm Accessories: -Hand crank for table adjustment Other accessories on request Price and other technical data on request
used
Clamping set OTT - JAKOB HSK A100 / B125 95.103.636.5.1 ( 9510363651 ) 182714/1 Thread: M16 x 1.5 New! Dimensions ( clamping set ): 138 x 53 x 53 mm Dimensions ( packaging ): 145 x 80 x 72 mm
used
Description: Consisting of various clamping cubes and clamping tables Approx. Onsite Dimension. (l x w x h): 3,500 x 1,500 x 700 mm, weight approx.: 500 kg
used
width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This cube has 3 magnetic clamping area. Dimension each area: Length: 2,000 mm Width: 2,000 mm Height: 2000 mm
used
Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
new
Magnetic clamping plate Size: 450 x 150 mm new
used
Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft
new
Clamping plate Dimension 900 x 630 x 120 mm Nute 28 mm Angle of the grooves 30°
used
Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg
used
Technical data Cutting surface at the top. 710 x 710 mm Clamping area 710 x 450 mm Swivel / Tiltable 0 - 90° mm Table height approx. 63 mm T-slot dimension (bottom / top) approx. 40 / 21.5 mm Weight approx. 560 kg Dimensions ( L x W x H ) 710 x 710 x 635 mm
used
Tables for hydrsulic press for clamping on the stump or for the edition on the table. Multiple available. The tables are from a 420to press with installation height 1,250mm The round tables have a continuous opening in the middle. More data and photos on request
used
7 pcs of clamping cubes 1000x750x400mm pirce 800eur/pc
new
Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg
used
Used Electromagnetic clamping plate , from ABA grinding machine Technical data: Length: 600 mm Width: 300 mm
used
Clamping car Braun WES fully hydraulic with auxiliary trolley with tracks
used
Clamping plate 5,000 mm x 2,000 mm x H 400 mm made of cast iron with 10 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.
used
Clamping plate 5,000 mm x 1,980 mm x H 300 mm made of cast iron, with 6 pieces T - grooves with 35 mm width, manufactured according to DIN876, the T - grooves manufactured according to DIN650 - H12.
used
Clamping bruecke outlet Plate 6.1, No.
spare parts - cook bolinders - top clamp Clamping shoe eneerone Plate 3.1B, No. 20
Clamping cylinder suitable for wedge tine press
used
Technical data: - Table dimensions approx. 1700 x 1700 mm - Side length approx. 700 mm - Welded steel construction made of flat steel 100 x 30 mm - Table height approx. 850 mm - Table area approx. 2.3 sqm2 - various clamping tools - Weight approx. 1500 kg
used
Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Tensioning tool: 270 mm -Groove: 14 x 36 mm -Dimensions: 270/20/H50 mm -Weight: 2.0 kg
used
Clamping angle with T-slots Size 1600x1250x1000 mm and 1250x1000x750 mm
used
Technical data: - Total - length approx. 2020 mm - Clamping surface length / groove length approx. 2000 mm - Width approx. 1000 mm - Plate thickness 180 / 300 mm - Plate thickness top plate 180 mm - 4 T - grooves - T - grooves distance 250 mm each - Groove width approx. 28 / 50 mm - Groove depth approx. 25 / 45 mm - various through holes - Weight approx. 2000 kg
used
Large electronic clamping magnet
used
width: 520 mm height: 700 mm depth: 350 mm thickness of clamping plate: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m There are 2 pieces Width: 300 mm Height: 1200 mm Depth: 510 mm About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshop You want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
width: 1300 mm depth: 1300 mm height: 2500 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1517 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table length: 3000 mm table width: 1500 mm table height: 850 mm side-clamping surface:: 200 (Höhe) mm weight: 1518 kg The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping capacity: max. 500 bar diameter of piston: 100 mm range L-W-H: 190 x 150 x 200 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
clamping capacity: max. 500 bar diameter of piston: 40 mm : M16 range L-W-H: 140 x 65 x 85 mm weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Technical description : 2 Units CLAMPING CUBES 400 x 500 x 800 mm length
used
Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg