clamping used for sale

Cast iron clamping cube - 5 sides Length 760 mm Height 455 mm Depth 610 mm T-slots numbers 5 T-slots T-slots dimensions 35 x 20 mm With a slight lack at the top side Weight approx 400 kg

Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.

Manufacturer: Brückner Type of Machine : Clamping Frame Working width: max. 2200 mm Roller width: max. 2400 mm Number of temperature zones/sections: 3 Calator: 2250 mm Find more here - / Contact us at -

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used

Round clamping plate with T-slot straightening plate and clamping tableDiameter 1500 mmCentering hole in the middle 80 mmPlate thickness 54 mmWorking height 970 mm- 6 T-slots 18 mm- 3 threaded holes M20, bolt circle 1000 mm- Steel substructure without centric holeWeight 785 kggood condition; used

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Technical data: Length: 400 mm Width: 495 mm Height: 800 mm

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring scraper 150 mm, still original welded in plastic foil with artificial leather case, with mm and inch - pitch, Steinless - Hardened, with thread table on the back for Metr.- ISO and Whitworth. Smaller batches can also be dispensed. 5.00 €/piece, stock approx. 25 pieces

Length: 350 mm Width: 150 mm Polarity ~ 9 mm Space requirement approx.: L: 440 x W: 210 x H: 135 mm Voltage: 24V Power: 2,04A

table length: 4000 mm table width: 2000 mm table height: 600 mm number of T-slots: number of T-slots: 6 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

-Mm 2.990 -1,990 mm width -Height of 5,080 mm -Weight 18,200 kg -125 x 125 - M24 thread size - pitch number of thread 640 units

Technical Data: Length: 620 mm Height: 500 mm Width: 380 mm

Specifications: Length: 490 mm Height: 800 mm Width: 400 mm

Specifications: Length: 1015 mm Height: 810 mm Width: 600 mm

Offer 26038 The slab can be viewed at the 02943 Boxberg location by appointment. Technical data approx.: - Plate length approx. 3000 mm - Plate width approx. 2500 mm - Top height without base approx. 350 mm - Top height with base approx. 870 mm - Thickness of the top plate approx. 75 mm - 9 T-slots in table surface length 6000 mm - Center distance of the T-slots in the table surface 250 mm each - Center distance of the T-slots from outer edge 125 mm - T - groove width approx. mm - T - groove depth approx. mm - Space required: L 3000 x D 2500 x H 870 mm - Weight approx. 8000 kg

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

This cube has 3 magnetic clamping area. Dimension each area: Length: 2,000 mm Width: 2,000 mm Height: 2000 mm

320 x 320 mm base and 4 pallets Auction-ID: A1-44702-145

approx. 700 x 500 mm, 600 mm high Auction-ID: A1-44702-155

Key data: 3000 , 1500

Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm

Specifications: width 2000 mm height 1200 mm Depth of 850 mm

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock ; Werkstaettengeprueft

approx. 500 x 400 mm Auction-ID: A1-44702-154

Auction-ID: A1-44905-193

Auction-ID: A1-44905-76

Full gate clamping cars Möhringer among the REF. No. 262-1492 L x W x H: 280 x 120 x 180 cm Weight 3000 kg Built in 1984 Price EXW with full frame saw Boegli MARA-2 (Ref. No. 262-1492) 19'800 EUR Excl. VAT The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Auction-ID: A1-44905-190

Auction-ID: A1-44905-194

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Pressing plate of BRUDERER BSTA 41 type W x D x H = 660 x 550 x 95 mm Hole = 500 x 100 mm

Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 795 mm -Width: 600 mm -Height: 130 mm -Plate thickness: 20 mm -with: support ribs -Weight: 112 kg

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 30 mm -Bores: Ø 18/20 mm, see photos -Number: 2x angles available -Price: per piece -Dimensions: 165/140/H245 mm -Weight: 13.1 kg

Clamping claws, clamping claws, clamping means, clamping element, clamping iron, clamping means, clamps, mounting brackets, clamps, clamping element, bracket, slot clamp -Clamping height: 60 - 370 mm -Clamping depth: 65 mm -Price: per piece -Number: 2 Stück -Dimensions: 290/80/H450 mm -Weight: 9.6 kg/piece

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm