clamping used for sale

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, -T-slot plate: clamping plate with support ribs and table extension on both sides -Clamping surface: 1800 x 1000 mm -Height: 840mm -Groove width: 30 mm -Transport dimensions: 1820/1010/H840 mm -Weight: 660 kg

Clamping actuator, clamping force generator, electric WMW EDU I160 Bj: 1979 torque adjustable in 8 steps max. 110 Nm 160 rpm 220 / 380 V 3AC 0,75 kW spline shaft profile according to TGL 0-5471 for more clamping actuators see MMZ158, MMZ159 !; New ! Dimensions: 280 x 130 x 170 mm

Description: Step clamping irons, step clamping supports, clamping elements, step clamps Properties: - Interlocked like a staircase, - For use in pairs, (height x length x width) 2 sets of tension stairs = 100 x 100 x 38 mm, 1 set of tension stairs = 60 x 60 x 38 mm, 2.5 sets of tension stairs = 40 x 40 x 38 mm, 3 sets of tension stairs = 23 x 23 x 38 mm, 3 sets of tension stairs = 13x13x38mm weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 275 x 240 x 55 mm

Description: Additional information: Hydraulic 2-jaw power clamping blocks similar to the KSH 160 series from Schunk, product features: 2-jaw power clamping block, centric clamping, standard stroke, base jaws: serration and cross offset weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm

Description: Step clamps, step clamping pads, clamping elements, step clamps, properties: - Interlocked like stairs - For use in pairs, (height x length x width), 6 sets of clamping stairs = 130 x 68 x 30 mm (28x stairs/teeth) weight approx.: 10 kg, Approx. Onsite Dimension. (l x w x h): 490 x 230 x 90 mm

Complete tilt clamping system 2 stueck tipping plates, stud and system covers, stoppers, pads, clamping strips, hoehenbloecke and much more. Length by width 2 piece 500400mm Holes 16mm Number of holes xxx stueck Distance of holes 50mm More data and photos on request Price and further information on request Special price

Alu clamping table - clamping block Offer number: 18285 Make: xxxxx Type: xxxx Machine Number: 18285 Built: xxxx Technical data: - Plate surface well preserved - Length approx. 1540 mm - Width approx. 1540 mm - Height approx. 410 mm - Plate thickness 20 mm - 6 pcs screw-on - bars 50 x 20 mm - various holes partly with thread - Intermediate bars between the upper plate and under the support surface - 4 towing eyes - Weight approx. 180 kg

- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14 kg

Clamping plate, plate field, grooved plate -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Clamping angle for workpiece clamping -Thickness: 15 mm -Surface: milled -Dimensions: 270/105/H115 mm -Weight: 6 kg

FENNER Clamping Bushing Taper Lock® metric bore 4030-95 FENNER clamping bush Taper Lock® with metric bore 4030-95

Clamping angle for workpiece clamping -Dimensions: W/H/L 355/345/550 mm -Thickness: 33 mm -Long hole: 34 x 350 mm -Surface: milled -Weight: 74 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 600/405/710 mm -Thickness: 26 mm -Surface: milled -Weight: 167 kg

Clamping angle for workpiece clamping -Dimensions: W/H/L 250/775/245 mm -Thickness: 27 mm -Surface: milled -Thread holes: M16 -Number: 2x mounting brackets available -Price: per piece -Weight: 98.5 kg/piece

Clamping angle for workpiece clamping -Dimensions: 196/80/H100 mm -Thickness: 12 mm -T-slots: 8 mm -Surface: milled -Weight: 3 kg

Clamping angle for workpiece clamping -Dimensions: 180/70/H100 mm -Thickness: 18 mm -T-slots: 12 mm -Surface: milled -Weight: 3.5 kg

Clamping angle for workpiece clamping -Dimensions: 200/320/H220 mm -Thickness: 25 mm -Groove: 20 mm -Surface: milled -Weight: 22.7 kg

Clamping angle for workpiece clamping -Dimensions: 151/391/H191 mm -Thickness: 18 mm -Surface: milled -Weight: 16 kg

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T grooves: 16 mm

Clamp length: , mm Clamp width: , mm : , Nm RU-LH Painting Assistance Painting assistance for the simultaneous painting of sash and glazing ledges. A clamp has to be positioned in each corner of the already made frame. The operation is started by using a foot valve. For different thickness of ledges the clamping device is height- and depth adjustable. The positioning is diagonally and the clamps stick out of the wood about 25 mm. Now the frame can be pressed into the sash and is fixed. For the painting the frame is positioned now about 10 mm outside in front of the sash. After drying, the frame is pressed into the sash, it will be removed before the glazing. The clamps can be removed by hand for the further processing. For different thickness of ledges the clamping-device is height- and depth adjustable. The height is adjustable from 700 – 1200 mm. Advantages: Quick assembly No jammin ...

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Also larger MAHO or lids, ... Clamping plates : A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

Univ., Milling machine table, Angle table, Clamping angle, Clamping table T-slot table, Attachment table for Univ. Tool Barrel Machine Table No.: 2230 05 001 300 00 Table size 700 x 460 mm Height 280 mm Slot width 14 mm Slot spacing 65 mm - Table top with 7x T-slot 14 mm mounting plate with 14 mm with slotted holes for mounting and 14 mm guide groove hole spacing Mounting plate Top = 670 mm, 50 mm top of the table surface (centrally measured) - Hole distance mounting plate center = 475 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate center = 2 pieces 15 mm, 100 mm, 112 mm top of the table surface (centrally measured)- hole distance mounting plate bottom = 475 mm, 240 mm top of the table surface (centrally measured) Dimensions L x W x H 700 x 460 x 280 mm Weight 130 kg very good condition; used

Clamping table, sinusoidal table, swivel table Swivel-clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Folding angle: 2 Folding angle: max. 7- folding angle 2 via threaded spindle folding angle max. 7 manually raised to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg good condition Ideal for making wedge strips; used

Length: 1000 mm Width: 680 mm Height: 1510 mm Machine weight ca.: 0,2 t well-preserved clamping angle with various holes for clamping holes.

Large cast iron clamping angle Ideal for clamping workpieces on a milling machine, a boring mill or other. The dimensions are approx. 90 x 70 x 73cm. Pick up Bremen or Siegen Loading is regulated.

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

Clamping angle WMW Clamping area: 200 x 194 x 44 mm Bridge width: 50 / 62 / 46 mm Groove width: 18 / 30 mm Groove depth: 30 mm Mounting area: 200 x 150 x 24 mm used, tested ! Dimensions: 200 x 150 x 194 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 30° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 45° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 60° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 198 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 30° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm used, tested ! Dimensions: 310 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 45° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 60° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 198 mm

Clamping plate, grid plate PAGUS Clamping area: 400 x 280 x 32 mm 7 rows of 10 threaded holes each: M10 x 1.5, continuous 6 rows of 9 threaded holes each: M10 x 1.5, continuous 6 rows of 10 holes each: Ø 7, continuous 7 rows with 9 holes each: Ø 7, continuous grid dimension: 20 mm used, tested ! Dimensions: 400 x 280 x 32 mm

Pressure watertight tie point, formwork accessories, KRASO tie point -monolithic connection of the vulcanized KRASO locking disc -easy installation -No assembly on site -easy closing of the clamping point -no time-consuming gluing of the plugs -no wage-intensive rework -absolutely watertight clamping point -Inside and OUTSIDE pressure water-tight tested -from company liquidation -Total length: 300 mm -1 mesh box approx. 350 pieces -Weight: including box 142 kg

Clamping drive, clamping force generator pneumatic WMW, VORRICHTUNGSBAU HOHENSTEIN 320 x 106 TGL 30-7608 drive: 27 x 27 mm New ! Dimensions: 380 x 160 x 155 mm

Clamping device, three-part, with adjustment aids PAGUS diameter workpiece: min. approx. Ø 200 mm - max. approx. Ø 500 mm 2x clamping device height lower jaws over Lower edge of mounting foot: 385 mm Mounting foot: 650 x 120 x 15 mm Dimensions: 780 x 290 x 930 mm 1x counter holder height above lower edge Mounting foot: 440 - 625 mm, infinitely adjustable Mounting foot: 650 x 160 x 15 mm Dimensions: 650 x 160 x 460 mm 4x adjustment aids diameter: 2x Ø 214 mm, 1x Ø 276 mm, 1x Ø 744 mm height: 60 mm center bore: Ø 100 mm used, tested ! Dimensions ( transport, with pallet ): 800 x 600 x 1100 mm Weight ( net ): 192 kg

clamping drive, clamping force generator pneumatic WMW / VORRICHTUNGSBAU HOHENSTEIN B 720 x 106 TGL 30-7608 92 New ! Dimensions: 360 x 200 x 120 mm

Clamping drive, clamping force generator pneumatic WMW / VORRICHTUNGSBAU HOHENSTEIN B 720 x 106 TGL 30-7608 40 New ! Dimensions: 360 x 200 x 120 mm

Clamping plate, clamping table Pagus groove width: 18 / 30 mm 360 x 260 x 55 mm

Clamping plate, clamping table PAGUS 360 x 260 x 55 mm Groove width: 18 / 28 mm Dimensions: 360 x 260 x 55 mm

Clamping plate, clamping table, T-slot grid plate PAGUS 285 x 300 x 50 mm Groove width: 10 / 18 mm Dimensions: 285 x 300 x 50 mm

Clamping drive, clamping force generator pneumatic WMW, VORRICHTUNGSBAU HOHENSTEIN 320 x 106 TGL 30-7608 New ! Dimensions: 340 x 180 x 130 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 205 x 195 mm Working height: 65 mm Slot width: 14 / 24 mm Dimensions: 290 x 205 x 65 mm

Clamping plate, clamping table, machine table PAGUS Working area: 1000 x 290 mm Working height: 120 mm Groove width: 12 / 22 mm New ! Dimensions: 1000 x 295 x 120 mm

Clamping plate, clamping table PAGUS Working area: 665 x 370 mm Thickness: 40 mm Groove width: 15 / 24 mm Dimensions: 670 x 375 x 40 mm

Clamping plate, clamping table PAGUS Working area: 995 x 125 mm Thickness: 38 mm Groove width: 14 / 23 mm Dimensions: 995 x 230 x 38 mm

Clamping plate, clamping table, T-slot grid plate PAGUS Working area: 770 x 396 mm Working height: 64 mm Groove width: 14 / 24 mm Dimensions: 770 x 396 x 64 mm