We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,235 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
used
Panel lifting clamp, sheet metal clamp, sheet metal claw, girder clamp, girder claw, sheet metal gripper, material gripper, material gripper -Sheet metal claw -Span width: up to 152 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 29 kg/piece
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 19 to 38 mm -Dimensions: 175/80/H440 mm -Weight: 9 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg
used
Cast iron clamping cube - 5 sides Length 760 mm Height 455 mm Depth 610 mm T-slots numbers 5 T-slots T-slots dimensions 35 x 20 mm With a slight lack at the top side Weight approx 400 kg
used
Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.
used
General SKU305S476 LocationBarneveld MakeProbst & Class Maschinenfabrik (D) TypeN-160 No.74196 Year of constructionUnknown Main Features MaterialStainless steel Motor11 KW Inlet diameter32 mm Specified Features - Colloid mill Colloid mill in linecheck Rotor sizesdia. 155x70mm Teethed rotorcheck Inletdia. 32mm Outletdia. 32mm Motor11 kW 380 Volt (Ex) Speed2910 rpm MaterialStainless steel Information Total height0,5 M Weight250 Kg Floorspace0,8x0,4 M ATEX compatiblecheckColloid millsProbst & ClassMills > Colloid millsBrand > Probst & Class What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKUR1400 LocationBarneveld MakeProbst & Class Maschinenfabrik (D) TypeK60/E No.00.024 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter32 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in linecheck Rotor sizesdia. 60x40mm Cross teethed rotorcheck With jacketcheck Without hoppercheck Inletdia. 32mm Outletdia. 37mm Motor2,2 kW 400 Volt Speed2850 rpm Information Mounted on wheelscheck With switchgearcheck Floorspace0,7x0,5 M Total height1,6 M Weight200 KgColloid millsProbst & ClassMills > Colloid millsBrand > Probst & Class What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKUR1263 LocationBarneveld MakeProbst & Class Maschinenfabrik (D) TypeK 100/0 No.86038 Year of constructionunknown Main Features MaterialStainless steel Motor5.5 KW Inlet diameter60 mm Specified Features - Colloid mill Colloid mill in linecheck Rotor sizesdia. 90x28mm Without hoppercheck Inletdia. 60mm Outletdia. 60mm Motor5.5 kW 380 Volt Speed2910 rpm MaterialStainless steel Information Mounted on framecheck With switchcheck Weight200 Kg Floorspace0,8x0,8 M Total height1,5 MColloid millsProbst & ClassMills > Colloid millsBrand > Probst & Class What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
DATA ON THE MACHINE Machine type: Front forklift / forklift Manufacturer: CLARK Model: CGC 70 Built: 2001 Condition: very good (used) Price 22,500 Euro net plus VAT Location Warstein , Germany Reference M-CLA-0820 Description We offer you a used forklift from the manufacturer Clark. Very low centre of gravity (bandages tyres) and very compact forklift. Very good converter, perfect for complicated machine transports. Technical data Payload 7000 kg Weight 9100kg Lifting height 3300mm Tree width 1400mm Fork length 1800mm 2 gear gearbox Engine hours 2595h (demonstrable) Machine comes first hand, all repairs were carried out by a specialist company. The paint is original! Rental from mid-September is possible. The hours may of course vary, as the forklift is in use! Our offer is aimed at professionals who are covered in accordance with the Trade C ...
new
Spuel machine / bistro spuel machine Milbrandt our classic! Model: BSM 400 easy to use! Stainless steel application 3 min Spueldauer 1 Glaeserkoerbe, 1 universal basket 400 x 400 incl. 1 plate insert and cutlery insert Capacity: 20 Koerbe/hr with drain pump sprouts and clear-spreaders dosing TOP Price = performance! Optinal: - Base - Koerbe Ready to go! Now NEW with attractive financing!
new
Spuelmachine / Tableware backService-Milbrandt The TOP Model! Model: BSM 500 Easy to use ! Powerful and Universal Sprout Machine 3 min Spueldauer 1 plate basket, 1 universal basket 500 x 500 and cutlery insert Power: 20 Koerbe/hr. with drain pump sprouts and clear-spreaders dosing TOP Price = performance! Optional: - Wasserenthaerter - 230V - Base - Koerbe --- Our classic ! --- available immediately! Now NEW with attractive financing!
used
Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm
used
Colloid mill Manufacturer: Probst & Class (PUC) Type: N60/S Factory no.: 87079 Power: 2.2 kW 380 V with on-off button n=2825 rpm miti hopper, circulating line & three-way valve very good condition LWH: 700 x 300 x 740 mm
Clamping bloc 1100 x 300 x 400 mm
Clamping bloc 1100 x 300 x 400 mm
Clamping bracket 500 x 460 x 1450 mm
Clamping bracket 500 x 460 x 1450 mm
Clamping bracket 1000 x 1200 x 1800 mm
Clamping bracket 1000 x 1200 x 1800 mm
used
Rotary cutting crusher Claas R 71.1 for woodworking companies Filling opening 1590 mm Machine height 1965 m Filling volume 1.8 m3 Drive power 11 kW Connection cable 4 x 10 mm2 Fuse 50 A Machine weight 1000 kg Capacity depending on feed material up to 1000 kg / h Low noise below 80 dB Plant is ready dismantled, in good condition. Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Colloid mill Manufacturer: Probst & Class Type: N100E N°: 90028 Power: 5.5 kW Engine manufacturer: Loher with operating instructions various spare parts (piping, taps, etc.) LWH: 1150 x 400 x 800 mm
used
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter ...
used
I'm planning to part with my super, fully functional gas forklift. Metal body, super stable. Compactly built, yet with an enormous lifting height and load capacity. It still belongs to the generation of robust working machines. Gas drive. No leaks in the hydraulics. New rollers in the lift mast. Lifting mast tested. — Clark forklift CGP 30. — YOC '98 — Load capacity of 3 tons. — Lifting height of 5.52 meters. — Triplex mast. — Side shifts. — Safety windscreen. — Windshield wipers. — Lighting. — Rear hazard lights. — Additional 2 exterior mirrors. — In addition, a total of 3 pairs of forks. 1x 1.2 meters 1x 1.8 meters 1x 2.4 meters partly as good as new. Crack test carried out, everything was great. — Load guards. — Safety driver's cage with plexiglass. — Includes manual. Signs of wear, paint worn, seat area worn through, lit ...
used
Tooth colloid mill Manufacturer Probst & Class PUC Type 10 L Power 7.5 kW RPM 2910
used
Colloid mill Manufacturer: Probst & Class (PUC) Type: JVM Item No.: 59201 Power: 9 kW with hopper with outlet chute with switchgear, cable & plug Rotor normally toothed, stator cross-toothed Weight: approx. 150-200 kg LBH: 600 x 430 x 960 mm
used
Posten Claas Spare Parts new - originally packed for combine harvesters / harvesters ca 1000 positions, Listenpr.~ 150.000,- € for VB approx. 19.000,- €
used
Claas spare parts new and used Tel.: 02461-1077
used
Colloid mill Manufacturer: Probst & Class (PUC) No.: 86086 Power: 1.1 kW with hopper with three-way valve with plug & on-off button LWH: 460 x 260 x 620 mm
used
Manufacturer : De lama Model: DLST/L Class 100 Year : 1992 Type: Dry heat oven for sterilisation and depyrogenation. Volume: 1 m3 Materials : Polished stainless steel - Sterilisation (160 - 180?C): Reduction of micro-organisms and their by-products by up to 12 log - Depyrogenation (220-250?C): Destruction of pyrogens and endotoxins inside materials - Horizontal laminar flow - Double door (new) - Electric heating - 2 trolleys - Olympia/EXP3: Control, regulation, management and recording system with high-speed processor. Possibility of designing the oven to withstand operating temperatures of up to 300?C in continuous service, thanks to the use of HEPA filters with a special sealant. Main applications : - empty glassware (e.g. vials, ampoules, bottles) - stainless steel equipment (e.g. trays, machine parts) - moisture-sensitive materials - basi ...
used
Clamping bloc 2090 x 1145 x 880 mm
used
Clark Stapler C500 YS - 4 to. Used In need of repair With Perkins engine Doesn't start at the moment Probably the injection pump Input errors and errors excepted
used
Vehicle data: Make: Clark, Type: Spicer 15.5HR 2741852 Transmission, Drive type: None, \Year of manufacture: 2007, Internal number: DIV1228, Mast data: Dimensions: Weight: 1000 kg, Battery & Charger: Description & Special equipment: Attachments: Special equipment: Front tyres: 0 x / Rear tyres: 0 x / / Description: Overhauled
used
Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999
used
Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1440 rpm -Wave SW: 17 mm -Construction: B3 -Protection class: EX -Dimensions: 423/290/H240 mm -Weight: 27 kg
used
Forklift cabin, full cabin, system cabin, complete cabin -unused driver cab for Clark electric forklifts or others -2x doors -Sliding windows in each of the doors -Data see photos -Also other cabins available
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -Tensioning sleeve: Ø 31 mm -Dimension: Ø 76 x 290 mm -Weight: 5.7 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -1x clamping sleeve: Ø 25 mm -Weight: 7.5 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg
used
General SKU384U1051 LocationBarneveld MakePuc Probst & Class TypeK60/GL No.89039 Year of construction1989 Motor Motor power2.2 kiloWatt Main Features MaterialStainless steel Motor2.2 KW Inlet diameter40 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia: 60x40 mm Teethed rotorcheck With hoppercheck Inlet40 mm Outlet35 mm Motor2,2 kW,220/380 volt, 2925rpm Speed2925 rpm Material Information With switchcheck Floorspace0,43x0,26 m Total height0,67 m Weight50 kgSolid pharmaceuticsOther feedStarchOther pharmaceuticsGeneric medicinesPowdered foodsFeed additivesColloid millsPuc Probst & ClasIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > Food & Feed > Other feedIndustries > Food & Feed > StarchIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Powdered foodsIndustr ...
used
General SKU056U362 LocationBarneveld MakePUC Probst & Class TypeK-100 No.91079 Year of construction1991 Material Rotor materialStainless steel Main Features MaterialStainless steel Motor5.5 KW Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesdia. 100mm Without hoppercheck Motor5,5 KW, 380 Volt (Ex) Speed2905 Rpm Information Mounted on wheelscheck With switchcheck Floorspace0,9x0,6 M Total height1,3 M ATEX compatiblecheckColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU002Y164 LocationBarneveld MakePUC Probst & Class TypeN-100E No.74099 Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor4 KW Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesdia. 100mm Motor4,0 KW, 380 Volt With variable speed drive(frequency converter) Information Mounted on wheelscheck With switchcheck Floorspace1,7x0,7 M Total height1,1 M Weight300 KGColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU094Y627 LocationBarneveld MakePUC Probst & Class TypeK-180 EL No.88004 Year of constructionunknown Main Features MaterialStainless steel Motor30 KW Inlet diameter25 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesdia. 180mm With jacketcheck Inlet4x dia. 25mm Outletdia. 60mm Motor25,0/30,0 KW, 380 Volt (Ex) Speed1475/2960 Rpm Information Floorspace1,7x0,7 M Total height0,7 M Weight650 KG ATEX compatiblecheckColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU364S880 LocationBarneveld MakePUC Probst & Class GmbH (D) TypePUC-Vikosator JV 10 No.64308 Year of constructionunknown Main Features MaterialMild steel Motor5.5 KW Inlet diameter60 mm Specified Features - Colloid mill MaterialMild steel Colloid millcheck Rotor sizesdia. 100x60mm Teethed rotorcheck With hoppercheck Inletdia. 60mm Outlet90x45mm Motor5.5 kW 380 Volt Information Mounted on wheelscheck With switchcheck Floorspace0,6x0,5 M Total height1,0 M Weight140 KgColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
General SKU212P150 LocationBarneveld MakePUC Probst &Class TypeJV 10 No.67397 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter60 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in linecheck Rotor sizesdia.90mm With hoppercheck Inletdia.60mm Outletdia.32mm Motor4.5/5.5 KW, 380 Volt Speed1430/2900 Rpm Information Mounted on wheelscheck With switchcheck Floorspace0.6x0.6 M Total height1.2 M Weight130 KGColloid millsPuc Probst & ClasMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Description: Claas round baler Untested / defects or incompleteness cannot be ruled out Approx. Onsite Dimension. (l x w x h): 4,500 x 2,300 x 2,400 mm, weight approx.: 2,000 kg
used
Overview The steam generator was built in 2015 by the American manufacturer Clayton. The machine was recently dismantled by a specialist company. Technical specifications Net output: 589 kW Equivalent steam production max.: 790 kg/h Water content in operation: 130 liters Regulated gas pressure minimum: 25 mbarG Maximum gas pressure: 200 mbarG Consumption at full load: 62.9 Nm³/ h Burner regulation (2-stage): 0-50-100 % Steam quality: > 99.5 Combustion efficiency (100% stage): 92% Combustion efficiency (50% stage): 94 Generator dimensions (LxWxH): 2,030 x 1,300 x 1,835/ 2,200 mm Dry weight: 1,215/ 1,285 kg Pump dimensions (LxWxH): 1,350 x 680 x 1,025 mm Weight of water pump: 325 kg Installed electrical power: 4kW Accessories Back pressure regulator DN40 Vertical atmospheric deaerator + chemical dosing pump Water softener Chemical tank 60L + alarm + drip t ...
used
Clayton steam generator, model: EO-404-1, serial number: B7718, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 46.2 A, PS: 10 bar, TS: 184 °C, PT: 15 Barg, volume: 1495 liter, capacity: 626.3 kg/h, HS: 83.9 m², 3928 kW, LCV-Hü: 42700 kJ/kg, maximum burner capacity: 4389 kW, minimum burner capacity: 878 kW, regular oil pressure: 5 bar, oil pressure at burner: 1-2.4 bar, oil flow: 370.0 kg/h, dimensions: 3000 mm x 1900 mm x 3350 mm.
used
Tooth Colloid Mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2,910 min.