cl used for sale

Sorting, feeding and setting machine Cap attachment and screwing station without filling point Fully automatic filling and capping system by feeding a filling unit with filling needle Cap sorter and applicator for lids and caps up to Ø 20 mm Functioning When the machine is started, the caps and lids aligned in the sorter are guided under the attachment and screw heads by means of a feeding system. Cappers include screw fasteners for screw caps and lid pushers for plugs and caps 3 x spiral conveying bowls for bottles, stoppers and caps 1 x Screwing Station 1 x Cap Attachment Station Container height 55 mm Container diameter 20 mm Cap diameter 20 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

Soco systems Model: T10 Case taper Serial: 49692 top and bottom case taper, side grip belts, max box 500mm L x 450mm W x 500H, mobile, 3Ph

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

With its 15 cm clamping range, the Framax multi-function clamp matches the panel size-grid exactly. This means that only one closure is needed per wall plane.

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...

DOUBLE KNIFE GUILLOTINE WITH GLUE APPLICATOR Manufacturer_ F+R?Model_ 45/3400? Max. cutting length (grain direction)_ 3400 mm? Min. cutting length (grain direction)_ 1050 mm Cutting width (cross grain) continuosly_ 65/450 mm Cutting width (cross grain) discontinuosly_ 450/800 mm

IMA FILLING AND CLOSING MACHINE, MODEL STERIFILL SMART PWD Year of construction: 2017 IMA SMART PWD is able not only to process difficult powders accurately, but also to simultaneously dose, by vacuum-pressure, two different types of pharmaceutical products inside the same vial, with single 100% check-weighing. Speed: max. 100 pcs/min Available formats: 10R Transport system: Intermittent motion Highlights Possibility of dosing up to 2 different pharmaceutical powders in the same vial Vacuum-pressure powder filling system Advanced 100% IPC with speeds of up to 120 pcs/min Possible integration of a capping station Pick & place stoppering system Fit for isolation technology with possibility of wetting in place cRABS for powder containment Technical characteristics Standard voltage: 400 V, 50 Hz, 3ph + N + G Installed power: 19 kW

Technical data Ruwac WS 2220 m Suction: 2,400 Watts Air capacity: 290 m3/h Voltage: 230 Volt Vacuum: 210 mbar Filter surface bag filter: 1.2 or 2.6 m2 Tank capacity: 35 litres Residual dust filters: 3.2 m2 Sound pressure level: 67 dB(A) Inlet: 50 mm

Length: 600 mm Width: 300 mm

High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee

2pcs 3250 x 1885 x 400 mm

6 pcs 6400 x 1885 x 400 mm

Industrial vacuum cleaner, Ruwac, DS 2720 L – used - : Price from location: 3.950.-€ (net) Manufacturer: Ruwac, Germany Type: DS 2720 L Serial number: DS2/2013826 Year of Make: 2013 Engine AF132M/2D-11LS+E2/0802 400V, 3-N, 25A, 50Hz, 7.5kW, 13.3A Weight: approx. 147kg Housing: GRP Negative pressure (mbar): -210 Air flow rate (m3/h) (measured with 3m hose): 820 Sound pressure level (dB(A)) (DIN EN ISO 3744): 77 Pocket filter dust class L, M (m2): 2.4/4.5 Residual dust filter dust class H (m2): 4.8 Height (mm) (bag filter 2.4 m2 dust class L, M): 1,290 Height (mm) (bag filter 4.5 m2 dust class L, M): 1605 Height (mm) (bag filter 2.4 m2 dust class H): 1,465 Height (mm) (bag filter 4.5 m2 dust class H): 1,780 Width (mm): 730 Length (mm): 920 Protection class IP 54/65 Capacity (liters): 90 Suction port (mm): 100 Condition: good Available: immediately Location ...

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

S. No.: 2802048 M.No.112-PM-1 Bind Machine Plastic Comb Binder Model 16-DB s.- No: 2831384

Comprimo B.V. / Shell 5. Shell Claus Offgas Treating (SCOT) (1983/2015) Year: 1983 Make: Comprimo B.V. / Shell Downstream minimization (H2S recovery efficiency = 94.5%) in tail gas of Claus Units 1+3. Includes operation of 2 Incinerators. Year of manufacture 1983 Process Design by Shell Process Engineering by Comprimo B.V. Throughput SCOT max. 90 t/d Offgas Throughput for each incinerator max. 11,4 t/d (2 Incinerators available) Operational operating temperature SCOT = 270 – 290°C (WABT = Weighted Average Bed Temperature) Operational operating pressure SCOT = 40 to 60 mbar Operational operating temperature Incinerators = 280 to 290°C Operational operating pressure Incinerators = 30 mbar 2015 – Replacement of complete quench tower C-3651 2022 – Decommissioning

Claw vacuum pump Dry Manufacturer: Busch Type: Mink MM 1322 AV Engine: DS 400V Suction power: 300 m ³/h Discharge pressure: approx. 150 mbar (abs.) Warranty: 12 months Condition: Near Mint Accessories: inlet filter; Operating instructions Delivery time: in the short term; ready for operation

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1402 AV Engine: DS 400V Suction power: 400 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Flaschenreinigungsmaschine, Hersteller Swiss PAC, Baujahr: 1992, Leistung 3.500 - 6.000 Flaschen / Stunde. Bottle washer washing machine, Made Swiss PAC, Year: 1992, Capacity 3.500 - 6.000 bph, in stainless steel

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

ZIM Hülsta Carcase Erector The carcass erector is used for erecting and transporting assembled carcasses. Carcase erectors are usually used for carcass presses with a continuous device. It facilitates handling when setting up large workpieces. Transport and assembly device within a corpus assembly line. Behind a continuous carcass press, the pressed carcasses are placed on the back with the help of this device. Assembly work on the underside can thus be carried out. Make: ZIM Hülsta-Werke Type: Carcase erector Metrics: More items - new and used - can be found in our shop! International shipping costs on request!

Busch/Heidelberg combined claw pressure/vacuum pump ME 2048 BH complete with 4.5 KW AC-motor, - 0.6 bar/ + 1.0 bar, completely overhauled with all wearing parts, Heidelberg version, 1 year warranty

floor-plate length: 5000 mm floor-plate width: 1800 mm floor-plate height: 290 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Get well plate surface -Length approx. 2000 mm -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

Busch claw vacuum pump Mink MM 1252 AV with 4.5 KW AC-motor, 250 m3/h, final pressure - 0.06 bar, completely overhauled with all wearing parts, 1 year warranty

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

width: 1300 mm height: 2500 mm depth: 1300 mm thickness of clamping plate: 50 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 1500 mm height: 1480 mm depth: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

Gardner Denver/Rietschle Claw vacuum pump VLR 300 complete with 5.5 KW AC-motor, 300 m3/h, max. vacuum: - 50 mbar, continuous operation: - 150 mbar, overhauled with all wearing parts, 1 year warranty

Technical data: Track width: 980 (mm) min. 790 (mm) Height: 430/400 (mm) min. 350 (mm) Clamp opening: approx. 800 (mm) Clamp rotation: 360° Seitenversch.: 330 (mm) (Standard gauge) Driving speed: forward and backward 100 (m/min) Drive total: 5.1 (kW) Overall length: 3,150 (mm) Weight: approx. 1,250 (kg) Type of control: remote control

table length: 4000 mm table width: 2000 mm table height: 600 mm number of T-slots: number of T-slots: 6 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3740 mm floor-plate width: 2400 mm floor-plate height: 300 mm width of T-slots: 45/80 mm T-slot - distance: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 3740 mm floor-plate width: 2400 mm floor-plate height: 300 mm width of T-slots: 45/80 mm T-slot - distance: 300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 5000 mm floor-plate width: 2000 mm floor-plate height: 300 mm number of T-slots: 8 width of T-slots: 28/48 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6400 mm floor-plate width: 1875 mm floor-plate height: 400 mm number of T-slots: 6 width of T-slots: 36/64 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

floor-plate length: 6000 mm floor-plate width: 2000 mm floor-plate height: 320 mm T-slot - width: mm T - slots distance: mm number of T-slots: total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height ...

Sell here various vibrating screens with sound protection of the brand CBV All relevant dimensions of the closures, please refer to the attached photos. The facilities are in like new condition. The price is per piece including the soundproofing hood. A control for the speed of sorting can be offered separately on request. Please check our current machine offers (new + used) on resale under: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Sell a semiautomatic 4 - roll screw this. You will find more machines and accessories below: ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35837&dealer=1& ;order=1& or ABC://ABC.resale.de/angebotelinkd-user.php?MyID=35846&dealer=1& ;order=1& visit us also at: cbv-pack

Gardner Denver/Rietschle Claw vacuum pump VLR 500 with 9.0 KW AC-motor, 500 m3/h, final pressure: - 750 mbar, completely overhauled with all wearing parts, 1 year warranty