circular saw cold used for sale

Refurbished: 2018 Year of construction: 1993-2000 PLC: Siemens S7 Blade 175-250 mm Power 1,5 KW Saw blade feed mm/min Cutting speed: 20-170 m / min (at option high speed spindle differierend) Workspace square Max: 60 mm Flat maximum work area: 40 x 80 mm Work area round: 2-70 mm Supply length 5-2000 mm Nachschubgeschw. 600 mm / sec (Saw) approximate weight: 1200 kg (Magazine), approx.: 600 kg Dimensions Lxwxh (saw) about: 3300 mm x 1000 mm x 2000mm (Magazine) about: 3900mm x 1500mm x 1300mm Footprint Lxw 4900 mm x 2000 mm The machine will be overhauled on request in our House. Among other things, following points are renewed: -Conversion to Siemens S7 -New electric components -New pneumatic lines -Ueberholte pneumatic components -New valve Terminal -Revision of the extraction -Minimum lubrication system overhaul -Replacing common wear parts -Overhaul of the lo ...

Multiple lengths saw FAS 14 with 2 circular saw units per 2.2 kW, 3 x 400 V, 50 Hz. -maximum piece length 6000 mm -maximum cutting height 120 mm -maximum Board width 500 mm -Working height 700 mm -Feed speed approx. 0.2 m / sec -Feed drive gear motor 0.55 kW / 3 x 400 V, 50 Hz Built about 1965 Weight 1600 kg Engine No. 314 Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Reconditioned 2018 Control: PLC Siemens S7 Blade max: 500 mm Motor output 5.5 KW Saw blade feed: 0-40 mm / s adjustable Saw height control electronic Square 90° maximum working range: 130 x 130 mm Flat 90° maximum work area: 190 x 130 mm Round 90° maximum working range: 170 mm Supply length 2-4000 mm (Saw) approximate weight: 800 kg (Pusher) approx.: 300 kg Dimensions Lxwxh (saw) approx.: 900mm x 1200mm x 1500mm (pusher) approx.: 4800mm x 900mm x 1100mm footprint Lxw 7200 mm x 1200 mm which is machine overhauled in our House and is then in a like-new condition. Among others were renewed following points: -New PLC control -Conversion to Elgo positioning system -New electric components -New pneumatic lines -New pneumatic components -Overhaul of the valve Terminal -Built-in Menzel minimal lubrication system -Replacing common wear parts -Overhaul of cabin -Overhaul ...

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Basic refurbished 2018 Saw blade 350-400 mm Engine power 6.5 / 8.5 KW Speed 1500/3000 min-1 Saw height control: electronic Working range Max square: 120 x 120 mm Flat maximum work area: 200 x 100 mm Flat maximum work area: 250 x 70 mm (width only) Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-600 mm (~ 9999 mm Mehrfachhib) Nachschubgeschw. Max. 500 mm / s Weight approx. 1300 kg Dimensions Lxwxh 1800mm x1300mm x1950mm The machine is completely overhauled in our House and is then in a like-new condition. Among other things, following points are renewed: -Modification on PLC control -Conversion on Siemens HMI user interface -Conversion to ball screw with servo control -New electric components -New pneumatic lines -New pneumatic components -Conversion on Valve terminal -Optimization of the Absaugungleistung -New Menzel mi ...

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Manufacturer Elumatec type MGS 142 Overhaul year: 2019 Year of construction: 1995-2018 Blade Max carbide: 500 mm Power saw motor: 4 KW Speed saw motor: 2800 min-1 Cutting speed blade 500 mm: 4400 m / min Saw height control: continuously variable, electronically Workspace Vierkant90 ° Max: 130 x 130 mm flat workspace: 90° Max: 190 x 130 mm work area round: 90 ° Max: 150 mm pneumatic supply length: 5-560, 10-1120 mm Compressed air connection, by the customer 6 bar Gewicht(Säge)CA.: 800 kg Dimensions Lxwxh (saw) about: 2900mm x 1400mm x 1500mm footprint Lxw: 2900 mm x 1400 mm additional description Elumatec SA 142 4KW straight cutting retrofit Elumatec SA 142 4KW straight cutting retrofit Fully automatic saw machines for non-ferrous metal and plastic The machine is both technically and optically after completed retrofit in mint condition. The machine will be  ...

CIRCULAR SAW MARTIN T73 AUTOMATIC 3 CNC controlled axes CE regulation: YES volt. 380/50 n.3 AXES CONTROLLED by CNC 1. blade height 2. blades inclination 3. parallel guide Equipment: parallelogram cross carriage T 7335 adjustment gauge T 7339 n.02 digital lingitudinal stops T 7341 3-axis scoring unit electrically adjustable T 7323 squaring device "Besaumfix" T 7372 second support T 7368 Technical data : length of carriage mm. 3700 cutting width mm. 1350 with 3-axis electric engraver Cutting height max 170 Blades inclination: 0 ° - 46 ° main engine power Hp 7.5 (Kw 5.5) Blade max diameter 500 mm 3-speed motor. rpm. 2800/4000/5500 Weight 2000 kg

Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Weibert S2 Format circular saw new Formatschiebetisch: 1600mm Engine power: 3 KW (5.5 HP), 400V,. n = 4000 min Cutting height: 103 mm Blade: 250 â 315 mm swivel: 90 °-45 ° WJ 700100 Options: Format table 1270 mm WJ-700101 Before scoring unit with motor 0, 75kW WJ 800105 Suction pipe with hose WJ 400104

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

Technical data: -Saw blade diameter 470 mm -Adjustable miter left + right up to 30 ° -Digital angle display -Cutting capacity 90 ° round 140 mm square 110 mm rectangle 290 x 70 mm round 45 ° 140 mm square 110 mm rectangle 190 x 70 mm at 30 ° round 130 mm -Sägeblattdurchm cutting speeds. 400 mm approx. 22.5 + 45 m / min -Sägeblattdurchm cutting speeds. 470 mm approx. 25 + 50 m / min -Hydr. Horizontal + vertical material clamp -Drive 400 V / 4 kW -Feeding speed of the saw blade, hydr. infinitely variable -Microsprüh - coolant system - space requirement approx. B H 1200 x 1950 x D 1700 mm -Weight 850 kg

TUGRA ALU - COLD SAWS TYPE AC-550 -Zaagblad 550 mm -Verstek Dubbel -2 pneumatic clamp -Check of the hydraulic system -Nevelsmeerssysteem -Rollenbaan met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

OBRIEN ALUMINIUM - COLD SAWS TYPE 400 VEGA I -Zaagblad 400 mm -Verstek Dubbel -Materiaalklem -Materiaalaanslag -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

TUGRA ALU - COLD SAWS TYPE AC-450 -Zaagblad 450 mm -Verstek Dubbel -2 pneumatic clamp -Check of the hydraulic system -Nevelsmeerssysteem -Rollenbaan met lengteaanslag -Blaaspistool -Beschermkap -Documentatie -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

FKS 250-1300 Circular sawing machines Max blade D.: 254 mm Be hem length 1250 mm RIP fence cutting width 610 mm The length width 845 mm Blade tilt 90 ° /-45 ° Table dimensions (L x W) 650 x 350 mm Table height 835 mm Blade rotation speed 4000 1/min Engine: 1, 5kW 230V Dust nozzle D.: 100 mm / 30 mm Weight: 142kg G & PIECES 5902030

Technical data: -Saw blade size 300 x 3.4 x 32 mm -Blade rotation speed RPM -Section - at 90 ° round 90 mm or square 80 mm -Pneumatic chucks -Material supplies automatic position control -Easy lifting up to approx. 1000 mm -Multiple hub -Swing-arm control panel with CNC control MEP -MOT. Dust aspiration + mobile chip extraction -Drive 400 V / 1,1 kW - space requirement approx. B 2750 x H 1800 X 2000 mm -Weight approx. 600 kg

CIRCULAR SAW Mod ALTENDORF F45 machine suitable for cutting plastics and solid wood CE mark . with Use and Maintenance Booklet and Declaration of Conformity 2 CNC controlled axes: 1st axis: blade lifting 2nd axis: blade inclination digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3400 max. blade mm.500 blade group inclinable at 45° max. cutting height with 90° blade = mm.175 max. cutting height with blade at 45° = mm.123 saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1100 Volt. 380/50 Year 2003

CIRULAR SAW type SCM SI 400 EP NEW machine . prompt delivery CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - manual, semiautomatic and automatic mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50 YEAR 2022

Double circular saw cross cut Rüco L x W x H: 6 x 3 x 1.2 m Weight approx. 1.5 to Built in 1969 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

HWS 720 K Tilting circular saws Electric motor with direct drive Saw blade diameter: 700 mm Speed: 1400 1/min 400V 50 Hz Working height: 850-1150 mm Rocker pad: 735 mm Dimensions: 1270 x 730 x 1130 mm Weight: 100kg G & PIECES 5965721

Hydr. Metal circular machine Technical data: -Saw flaked diameter up to 350 mm -Cut range at 90 ° -around 110 mm -four-edged 100 mm -rectangle 180 x 40 mm -or 160 x 85 mm -at 45 ° -around 110 mm -four-edged 100 mm -Walking adjustable Li + Re ever 0-90 ° -2 cutting speeds 16 + 32 m/min -Drive 400 V/1.2/1.8 kW -Feed speed of the saw blade hydr. infinitely controllable -Coolant equipment -Supplusion â roller duct 3000 mm -Rebuff â roller duct with measure 3000 mm -Space requirements approx. B 650 x H 1650 x T 900 mm -Weight approx. 750 kg

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Radial arm Saw make ELU type 1251Machine -No: 0045 Year 1993Cutting area longitudinal: 645 x 68 mmtransverse: 370 x 68 mmSaw blade size: 250 mmSaw blade speed: 2800 rpm.Boom rotatable by: 360 °Motor mount rotatable by: 360 °Connected load: 1450/1100 WPower connection: 220 V 7 50 HzWeight: 54 kgExternal dimensions: 1150 x 1150 x 2000 mmWith- Chip extraction- side and rear chip protection- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw machine make EISELESaw blade diameter :: 250 mmCutting area: 90 °: 45 °at Sägeblattdrm. 275 mm: 120 x 75 mm: 80 x 75 mmL-iron: 80 x 80 mm: 80 x 75 mmFlat iron: 120 x 75 mm: 80 x 75 mmSquare steel: 75 x 75 mm: 75 x 75 mmRound material: 90 mm: 90 mmSolid material round: 60 mmStandard saw blade: 275 x 2.0 x 40 mmDrive power:: 1 / 1.2 kWMachine head can be swiveled on both sides: 45-90-45-30 °Dimensions: 900 x 800 x 1100 mmWeight approx .: 230 kgused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2 assembled aluminum circular saws make EISELE type LMS III PVMachine -No: 2224 + 2225 built in 1988xa0Technical specifications:Saw blade size: 400 x 4.0 x 40 mmCutting area 90 °: 500 x 140 mmhor. 45 ° L + R: 400 x 140 mmvertical 45 ° L: 500 x 90 mmVenetian blind box profile: 500 x 152 mm(with saw blade 410 mm)Saw blade speed: 2800 rpm.Drive power: 2.6 kWWeight per piece: 670 kgExternal dimensions per piece: 1800 x 800 x 1300 mmWith- hydr. stepless feed- Spraying device2 identical saws LMS III PV - mounted together on a base frame - for cutting larger widths and mitres 45 ° L and 45 ° R!The saws are sold together or single!If the saws are sold together, a designated cabinet is included.The saws come from a CNC controlled profiling machineThe technical. Data concerns 1 machine. When taken over and used in the now inflated state (both machines assembled opposite each other), the machi ...

Miter and miter circular saw Fabr. ELU type TGS 172Machine -No: 2201 Year 1983Saw blade diameter: 250 mmSaw blade speed: 2600 rpm.Cutting area 90 °: 0 x 70 mm45 °: 0 x 38 mmPower connection: 220 V / 50 HzElectricity requirement: 1.1 kWDimensions: 700 x 650 x 850 mmWeight approx. 48 kgWith- Version rotatable as a cross-cut and table saw- tiltable and rotatable- Length stop 3.0 m- feet for machine and stop- Table longitudinal stop- Suction hoseused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw make KALTENBACH type SKL 400Fabr. -No: 46620 built in 1977Saw blade diameter: 400 mmCutting area 90 ° round: 135 mmCutting area 90 ° square: 120 x 120 mmCutting area 90 ° flat: 70 x 280 mmCutting area 45 ° square: 105 x 105 mmCutting area 45 ° flat: 55 x 120 mmFeed rate: 0 - 3000 mm / minDrive power: 6.0 hpWeight: 650 kgDimensions: 910 x 1200 x 1700 mmWith- pneum. vertical clamp- Measuring roller conveyor- discharge roller conveyorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Aluminum circular saw Fabr. MEP type Cobra 350Fabr. -No: 021746 LRX year 1993Cutting area 0 ° round: 120 mmCutting area 0 ° square: 105 x 105 mmCutting area 0 ° flat: 180 x 70 mmCutting area 45 ° round: 120/110 mmCutting area 45 ° square: 100 x 100/95 x 95 mm mmCutting area 45 ° flat: 135 x 60 mmSaw blade speeds: 1700/3400 rpm.Vise opening: 180 mmDrive power: 1.5 / 2.2 kWWeight approx. 160 kgWith- 2 hours. pneum. tensioners- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Glass bead saw / miter saw for aluminum and PVC profiles Fabr. ELUMATEC type MGS 460Fabr. -No: 20441 built in 1994Saw blade diameter max .: 300 or 250 mmSaw blade speed: 3800 rpmSection range: sh. diagramCompressed air connection: 7 barAir consumption per cycle: 10 l / minPower: 1100 WPower connection: 380 V / 50 HzOutside dimensions approx: 600 x 600 x 1200 mmWeight approx. 60 kgWith- Roller conveyor- Spraying deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Semi-automatic aluminum circular saw make KALTENBACH type SKL 350Machine -No: 12513 built in 1965Technical specifications:Saw blade diameter: 350 mmCutting range 90 °round: 135 mmsquare: 120 mmflat: 70 x 280 mmCutting range 45 °square: 105 mmflat: 55 x 210 mmSaw blade speeds: 2250/4500 m / minDrive power: 5/6 HPWeight: 650 kgExternal dimensions approx .: 1200 x 1200 x 1500 mmWith- manual material tension- rotatable table for miter cutsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Underfloor circular saw for aluminum made by EMMEGI type 500 SCAMasch. -No: 191446, year of construction 1987Technical specifications:max saw blade diameter: 500 mmSpeed: 2890 rpm.Cutting capacity 90 ° e.g.: 170 x 150 mmor e.g.: 100 x 250 mmCutting area 45 ° e.g.: 170 x 165 mmor e.g.: 130 x 150 mmCutting area 20 ° e.g.: 150 x 60 mmor z. W .: 90 x 90 mmWeight approx: 520 kgDrive power: 4.0 kWWith- Minimum quantity spraying device- 2 vertical clamps- Miter cutting deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Catalog number H0242 - new machine, in stock - CE certificate - max diameter of the blade 400mm - adjustable up / down wheel and 45 degree angle - cutting length 3200mm - cutting width 1350mm - Cutting height 90 ° / 45 ° - 120 / 75mm - trolley on steel bars - the diameter of the undercut 120 x 20 mm - saw blade rotation of 3000.4000.5500rpm - undercut speed of 9000rpm - 5.5 kW / 400 V motor - Subcutaneous motor 1,1 kW - digital display - electric saw setting Overall dimensions: - length 3220mm - width 3150mm - height 900 mm - weight 800kg - the table extension - widening the table - angle cutter Complete with main blade and cutting disc Net price: 20670 PLN Net price: 4921 EUR calculated according to the price of 4,20 euros (With higher fluctuations the price may change)

Catalog number R059 - new machine - CE certificate - saw diameter 400mm - cutting width of the parallel gardener in Z400, Z400 EL 1000/1350 / 1525mm - dimensions of the sliding carriage 3200mmx420mm - diameter of the saw and the scoring hole 120mm, 20mm - sliding table 420x3200 mm anodized - cutting length 3500mm - blade diameter (not included) max 400 mm, 350 mm with the scoring unit - 120 x 20 mm cutter - not included - cutting height 90 ° 125 mm, 45 ° 90 mm - 3 cutting speeds 3000/4000/5000 rev. / min. - cutting width between the saw and the parallel stop 1350 mm - transverse table (1420 x 650 mm) with transverse stop with 2 buffers - manual height adjustment and blade inclination - automatic star / delta switch - weight 850 - 1080 kg - 400 V / 7 kW (9.5 HP) motor (S6) - 1.3 kW undercutter power (S6) Net price: 29300 PLN Net price: EUR 6735 depending on th ...

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Pendulum circular saw Irion Cutting width 350 mm Roller table 3000 mm L x W x H: 600 x 500 x 1800 mm Weight approx. 250 kg Built in 1978 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Circular saw sharpening machine Vollmer Cne

Circular saw sharpening machine Vollmer CNG

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

Table circular saw Schelling SKR with SUVA protection with stop Bösch L x W x H: 2200 x 1800 x 1100 mm Weight approx. 750 kg Built in 1973 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Plate circular saw Finesse vertical Format 510 x 205 cm 2 seed units (1 x horizontal, 1 x vertical) L x W x H: 620 x 260 x 100 cm Weight approx. 700 kg Built in 1975 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...