circular machines used for sale

OVERHAULED IN 1997, SAW BLADE DIA.: 1000 MM, DRIVE PIN HOLES: 4 x 30/200 MM; ROUND MATERIAL DIA.: 360 MM, SQUARE: 330 MM; FLAT PROFILES: 600 x 260 MM, 6 STEPS OF SPEEDS,

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

Manufacturer: Pressta Eisele Type: 501 angle punch Overhaul year: 2020 Built in 2010 Saw blade carbide: 500 mm Drive power saw motor: 5.5 KW Speed Saw Motor: 2860 min-1 Cutting speed Saw blade: 4500 m/min Saw blade feed: infinitely adjustable 0-70 mm/s Tool area 90 max approx.: 20 x 250 mm Punching cylinder: 1 pcs vertical top diameter 100 mm ,1st st horizontal front diameter 100 mm Punching force power: 4.0 KW Pressure max. 280 bar Pressure in KN at 280 bar approx.: 210 KN Volume flow at 280 bar approx.: 6.8 L/ min Pressure in KN at 200 bar approx.: 150 KN Volume flow at 200 bar approx.: 9.5 L/ min Supply length pneumatic: single stroke max. 600 mm Servo controlled: single stroke max. 600 mm Multiple stroke max. 9999mm Replenishment. servo-controlled replenishment unit max. 500 mm/s Compressed air connection on the side: 6 bar Weight (s ...

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE

Circular saw sharpening machine Vollmer Cne

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 90 x 90 mm Mitre cutting area at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 rpm Drive motor: 380 V, approx. 1.3 kW Space requirements: 850 x 600 x 1600 mm

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

CIRCULAR SAW model SCM SI 400 EP CLASS with CNC-controlled 3-axis ( blade lifting, blade inclination, motorized parallel guide ) with scoring unit EASY CNC electronic control CE regulations : YES with Instruction Manual and CE declaration conditions of use: excellent volts.380/50 Electronic control: manual, semi-automatic and automatic management modes - operator interface with clear and professional graphics 7 inch "Wide screen" color display for precise cutting of furniture, custom-made furnishings, kitchens, panels, doors, frames, composite materials, aluminum and various materials Composition: Sliding carriage in extruded aluminum with large section, rigid and with closed reticular structure for maximum resistance Anodized and hardened surface for maximum wear resistance Ground prismatic guides Worktop complete with extensions, it is made entirely of cast iron ...

SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - carriage mm. 3800 - Cutting width 1270 mm on parallel fence - motor 7.5kw - year 2006 (CE)

Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Afkortmachine met één kop en oplopend mes voor het zagen van grote secties, ontworpen voor 90° snijden. Een opvallend kenmerk van dit product is de optimale kwaliteit van het snijvlak, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen max. vlak werkstuk: 600 x 50 mm max. rechthoekig werkstuk: 150 x 340 mm / 200 x 280 mm Dia saw / abrasive - disk : 650 mm Power needed / motorpower: 5,5 kW

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

met 13 meter invoerrollenbaan met digitale uitlezing Dia saw / abrasive - disk : 400 mm Turningspeeds: 10/20 m/min Weight: 1250 kg

MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg  ...

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x2900x850 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3000x2900x850 mm Weight: 1280 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2540x2900x850 mm Weight: 1200 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1800x1200 mm Weight: 650 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8015x1635x2125 mm Weight: 2400 kg Total power requirement: 13,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Saw blade diameter: 350 x 2,5 x 32 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: flat: 170 x 90 mm Motor output: 1,8 kW machine weight ab.: 500 kg dimensions: 1200 x 800 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x2070x1135 mm Weight: 320 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit, Polar 2.9, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed b ...

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

RGA Pacific 500

Automatic circular saw sharpening machine completely overhauled. For fully automatic sharpening of HM circular saw blades, of all common tooth shapes. Equipped for oil cooling, fire extinguishing equipment. Technical data: Circular saws Ø with robot 130 to 600, without robot 130 to 840 mm, tooth pitch with robot 8 to 50 mm, without robot 8 to 120 mm. Available on request with loader robot ND 230, extraction system.

Chest grinding machine for HM circular saw blades. Completely overhauled and painted. Suitable for oil and emulsion cooling. Saw blade Ø 150 - 1000 mm, tooth pitch 0 - 120 mm.

Automatic machine for chest and back grinding of carbide-tipped circular saw blades; Refurbished and repainted

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

Suitable for automatically grinding chip breaker grooves in HSS, segmented and TCT circular saws. Accessories: Control system for automatic offset of grinding spindle,, coolant system,, stepless adjustable working rate,, machine light., 1 sawblade mount., Circular saw blade diameter: 165 - 630 mm, Tooth pitch: 3 - 50 mm, Saw blade thickness: 2 - 6 mm, Working speed: continuously adjustable from 24 - 50 z/min., Grinding wheel diameter: 25 and 30 mm, Grinding wheel width: 0.3/0.4 and 0.5 mm, Connected load approx.: 0.4 kW (400 V / 50 Hz), Weight approx.: 210 kg, Dimensions W x D x H approx.: 1020 x 900 x 1620 mm, colour: light grey RAL 7047

Description: 4-axis CNC controlled grinding machine, suitable for the automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Coolant system,, Total enclosure,, Automatic central lubrication,, Hollow face grinding unit, mist extractor N183, Motor driven rake and clearance angle adjustment,, Machine lamp,, Oscillation grinding at tooth face and tooth clearance,, Multifunctions handwheel,, 2 grinding wheel flanges for face and top grinding,, 1 centering ring 30 mm,, 1 mounting mandrel., Circular saw blade diameter: 80 to 840 mm, Circular saw hole diameter: 10 - 300 mm, sawblade centrebore: 10 - 180 mm, Sheet thickness: up to 8 mm, Tooth pitch: up to 100 mm, mass: approx. 1660 kg, Rake angle: -10 ° to + 40 °, Clearance angle: from 5 ° to 45 °, Angled grinding on the back of the tooth: up to 45 °, Angled grinding on the tooth face: up to 1 ...

Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011

Suitable for automatic, double-sided tooth grinding of carbide-tipped circular saw blades., Accessories:, Wet grinding attachment,, Motorized rake angle adjustment,, 2 grinding wheel holders,, 1 mounting bolt., Circular saw blade outer diameter: 80 to 1270 mm, Circular saw drill diameter: 10 - 220 mm, sheet thickness: up to 14 mm, Tooth pitch: 6-120 mm, Grinding path: max. 16 mm, Cross angle : -15° to +40°, Tangential free angle: 0 to 5°, Grinding speed: 0.5 to 6 mm/s, grinding wheel diameter: 125 mm, Connected load approx.: 3,6 kW (400 V / 50 Hz), Weight approx: 1300 kg, colour: green RAL 6011

Offer 26163 Technical data approx : - Max. workpiece diameter 80 mm - Projection 70 mm - Welding torch tripod adjustable in X, Y, Z - Tripod method by handwheel 500 mm - Projection tripod 70 mm - Center width 600 mm - Tailstock with pneumatic pressure tip - 3 jaw chuck 100 mm - Handheld remote control - Connection cable - Pneumatic connection - Table base W 2000 x H 850 x D 700 mm - Space requirement approx. W 1150 x H 650 x D 500 mm - Weight approx. 200 kg

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Max Saegeblattdurchmesser, 315 mms of drilling 32 mms sheet speeds 53-105 revos quick instep vice 180 mms of opening engine power 2.2 kW role edition coolant equipment +-45 ° tiltable weight 220 kg special price: net 1584,-? . options: underframe net 197,-? circular-saw blade

Format sliding table: 3200mm Engine power: 400V 5.5 KW (7.5hp) Cutting height: 125mm Saw blade: 300-400mm swivel: 90-45 electrically pivotable and height-adjustable Industrial scoring unit for 120mm scoring saw blade Parallel cutting width: 1500mm