chuck used for sale

Three-jaw chuck key, three-jaw lathe chuck -square size: 17 mm -Sleeve: Ø 38 mm -Number: 2x available -Price: per piece -Weight: 2 kg/piece

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -centrically exciting: -Passage: Ø 54 mm -Weight: 15 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Fucking flange for: bayonet mount -Outer: Ø 240 mm -Cone size: 6, cone Ø 106, bolt circle Ø 133.4 mm -Weight: 7 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -centrically exciting: -Weight: 35 kg

Four-jaw chuck, four-jaw lathe chuck -Lining size: Ø 250 mm -Passage: Ø 80 mm -Weight: 19 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -centric: exciting -Chuck size: Ø 242 mm -Rezess: Ø 190 mm -Hole circle: Ø 215 mm -Weight: 26.4 kg

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)

Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Three-jaw chuck diameter 240mm

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

chuck for 25 mm shafts total height 170 mm

Chuck diameter: 0 mm Turning diameter: 970 mm Number of chucks: 2   MACH-id     5587 MAKE          DeMoor TYPE            825 S-360 YOP               1975 SPECIFICATIONS Swing over bed Ø       970 mm Swing over cross slide Ø    700 mm Spindle bore           360 mm Spindle power          22 kW Stroke pinole        360 mm Spindle taper           6 Mk Speeds / ranges          28 - 500 Rpm DIMENSIONS Length         10.000 mm Width           2.200 mm Height           2.300 mm Weight        ...

- CNC : Fanuc 32 - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 165 [mm] - Number of Turret positions : 2 X 8 - X/Z stroke : 130 / 145 [mm] - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.400 [kg] - Interface : USB / PCMCIA - Tool monitoring - Coolant tank - Chip conveyor - Workpiece loading robot : 1 - Max. workpiece weight : 2x 3,0 [kg] - Max. workpiece diameter : 120 [mm]

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg

diameter:210 mm weight of the machine ca.:0,05 t turning speeds:4200 Bore:75 mm clamping diameter:254 mm dimensions of the machine ca.:0,6 x 0,5 x 0,4 m 2-jaw power operating chuck with draw pipe and various jaw sets.

For tools with cylindrical shank (for KHE 32) Chuck span : 1 - 13 mm

Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !

Magnetic chuck, electric PAGUS 205 x 78 mm 220 V DC 0.14 A Dimensions: 300 x 78 x 78 mm

Rotary table with 3-jaw chuck PAGUS Ø 250 mm Table height: 170 mm groove width 12 mm used, tested ! Dimensions: 350 x 300 x 170 mm

Morse cone / chuck holder PAGUS MK5

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 MK4 im Holzkasten New ! Dimensions: 280 x 240 x 105 mm

Tapping, tapping WMW GB3 MK 3 M12 - M30 4 collets: Ø 8 / 12 / 16 / 20 mm New ! Dimensions ( tapped chuck ): 310 x 80 x 80 mm Dimensions ( packaging ): 300 x 100 x 100 mm

Tapping, tapping WMW GB3 for taps M12 - M30 MK 3 New ! preserved ! Dimensions ( Tapped chuck ): 310 x 80 x 80 mm Dimensions ( packaging ): 300 x 100 x 100 mm

Quick action chuck WTE 11.297.40.13 3779303/013 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Quick-action chuck PAGUS DIN 69871 AD/B SK 40 Tool: Ø 1 - 13 mm 15 Nm used, tested ! Dimensions: 159 x Ø 64 mm

Quick action chuck WTE 11.296.40.13 D38836 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Short chuck HOLEX 301550 SK 40 - A tool: Ø 1 - 16 mm used balancing quality ( G ): 6.3 at 15000 rpm Cantilever length ( A-dimension ): 80 mm used, tested ! Dimensions: 150 x Ø 64 mm

diameter: 315 mm 3-jaws chuck without jaws. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3- Jaw chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm bolt circle: 175 mm Height with jaws: 125 mm feed number: 507 Dimensions: 200 x 200 x 125 mm

Stock Number: 3827 Chuck 4 jaws face plate Manufacturer: Colombo & Lenna, Type: 4J-1500 Year of construction: 1980 Specifications: Feed dia. 1500 mm Attachment Camlock 11 Drill 180 Length: 1500 dia., Height: 500 mm, Width: , Weight: 900 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -without: interchangeable jaws -Chuck size: Ø 225 mm -Cone: Ø 106 mm -Weight: 28 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 200 mm -interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Hole circle: 172 mm -Weight: 90 kg

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Beeks: soft -Chuck size: Ø 200 mm -Weight: 22 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotary jaw set for power chucks, 4 sets -Jaw width: mm -Dimensions: see photo techn. drawing -Price/delivery: complete -Transport dimension: 330/230/H105 mm -Total weight: 27.5 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK4 -Quick change case diameter: 46 mm -1x sleeve: MK2 -1x sleeve: MK3

Quick-change chuck, quick-change mount, quick-change head, quick-action drill mount, quick-change insert -Quick change sleeves: 10 pieces -Intake: Inside Ø 4 to 8.5 mm, see photos -Version/Size: Ø 30 x 105 mm -Price/delivery: complete -Transport dimension.: 260/170/H50 mm -Weight: 5 kg

Quick-change chuck, quick-change mount, quick-change head, quick-action drill mount, quick-change insert -Quick change sleeves: with drilling tool, 10 pieces -Intake: Inside Ø 9x 12 mm / 1x 17 mm -Version/size: Ø 30 mm, see photos -Price/delivery: complete -Transport dimension: 260/170/H50 mm -Weight: 4.2 kg

Quick-change chuck, quick-change mount, quick-change head, quick-action drill mount, quick-change insert -Quick change sleeves: 9 pieces -Version/size: see photos -Price/delivery: complete -Total dimensions: 200/120/H100 mm -Weight: 2.8 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, 2 quick-change chucks / 6 sleeves -Types: FW4 RSWF 4 recording MK4 -Quick-change sleeves: 4x MK2, 1x MK3, 1x MK4 -Dimensions: 220/80/240 mm -Weight: 8.3 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg