chuck used for sale

three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, precision three-jaw chuck chuck size Ø 230 mm -Jaws: individually and fully adjustable -Passage: Ø 66 mm -Bolt circle: Ø 193 mm / M12 -Dimensions: Ø 230 x 130 mm -Weight: 21.2 kg

three-jaw chuck, three-jaw lathe chuck -Manufacturer: SCA Skand Chuckfabriks, three-jaw chuck chuck size Ø 110 mm -Passage: Ø 25 mm -Bolt circle: mm -Dimensions: Ø 110 x 115 mm -Weight: 4.8 kg

TOS chuck 200 mm

500 mm chuck TOS

HSK-A63- Drill chuck 1 to 13 /thread chuck/thread collet chuck, also from Voha Auction-ID: A7-51245-98

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

3-jaw wedge rods lathe chuck FORKARDT TYPE F+160No. 1659 181Identical to Forkardt, SMW or RöhmDiameter: 160 mmInner diameter: 45 mmChuck flange: Short taper DIN 55022 Size 61 Set of chuck jaws consisting of basic jaws and hard top step jaws for turning1 set of chuck jaws consisting of basic jaws and soft top step jaws for turning- central adjustmentWeight: 11 kggood condition; used

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 146 x 105 mm -Weight: 3.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 76 x 93 mm -Weight: 1.0 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 95 x 105 mm -Weight: 1.8 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 127 x 135 mm -Weight: 3.8 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 102 x 130 mm -Weight: 2.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck, 2 pieces -Dimensions: see photos -Submission/Price: complete -Overall dimensions: Ø 85 x 105 mm -Weight: 0.9 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 172 x 105 mm -Weight: 4.3 kg

Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Step chuck: Precision chuck -Dimensions: see photos -Overall dimensions: Ø 120 x 105 mm -Weight: 2.4 kg

Drill chuck D=2.6-16 from Voha-Tosec thread chuck M3 to M12/ size 1 from Garant + 4x thread inserts, weight 4 kg Auction-ID: A7-51245-8

3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms

Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

Plan disc Bison New in original packaging

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

4-application chuck, wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 330 mm -Clamping force: max. 1500 daN -Thread: M16 -Weight: 83 kg

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Various guide rifles

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chucks, four-jaw chucks, face plates -Outer diameter: 330 mm -Interior diameter: 100 mm -Short taper: size 6 (106.3 mm) -Rezess: O 252 mm -Hole circle: O 171 / O 18 mm -Dimension: O 330 / H35 mm -Weight: 16 kg

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 315 mm -Passage: Ø 86 mm -Quantity: 1 piece available -Price: per piece -Weight: 60 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/185 mm -Dimension: Ø 210/90 mm -Weight: 6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 220 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm -Dimension: Ø 220/78 mm -Weight: 6.1 kg

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

buckles: 4 knives: 1 max. paper size: 49 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool holder, milling holder, milling tool, adapter, Weldon -Manufacturer.Gewefa, spindle tool type SK50x49x300-M24 -Hole: SK50/ Ø 29 x 300 mm -Total dimensions: Ø 98 x 440 mm -Weight: 7.0 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 142 - 145 mm -Dimension: Ø 280 x 45 mm -Weight: 13 kg

Collet chuck, tool holder, tool holder, milling chuck, milling tool -Milling chuck: SK50 2 pieces -Tool holder: Ø 32/16 mm -Price/Sale: complete -Overall dimensions: 355/180/100 mm -Total weight: 10.4 kg

Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

chuck for 25 mm shafts total height 170 mm

diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck -Outside: Ø 280 mm -Inside: Ø 105 mm -Mounting: Short taper 8 (139.7 mm) -Weight: 13 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping device with 3-jaw chuck, three-jaw chuck PAGUS three-jaw chuck: Ø 315 mm height with jaws: 180 mm Dimensions: 420 x 320 x 180 mm