chuck used for sale

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks -Outside: Ø 280 mm -Inside: Ø 105 mm -Recording cone: 87 140 mm

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 32 mm -Dimensions: see photos -Quantity: 14x quick-change chucks available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/pc.

Two-jaw chuck, 2 jaw chucks, vice, face plate -exciting: centric -Chuck size: Ø 200 mm -Weight: 19 kg

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 270 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 21 kg

3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used

Chuck diameter: 1400 mm Chuck bore: 800 mm Number of jaws: 8   Horizontal:  Horizontal Diameter:    1400mm Centre height:800mm Length:      1400mm Width:       1200mm Height:      1400mm Weight:      2500kg

RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...

Chuck flange, flange holder, lathe chuck flange, driving flange -Feed flange: Outside: Ø 190 mm -Mounting: thread, dimensions see photos -Dimensions: Ø 190 x 55 mm -Weight: 5.8 kg

3-jaw chuck, three-jaw chuck WMW outer Ø: 315 mm bolt circle Ø: 275 mm bore Ø: 100 mm height with jaws: 115 mm used, tested ! Dimensions: 320 x 320 x 120 mm

Dividing head with three-jaw chuck WMW Ø 250 mm Motor 1: Type 1213WSM2.85.08 52 - 172 V DC, 26 A Motor 2: Type MA 14 F130 - 4A 0,37 kW 220 / 380 V 3AC Three-jaw chuck: hole diameter: Ø 80 mm, not continuous ! hole depth: 70 mm flange ( dividing head ): Ø 190 mm bolt circle diameter: Ø 160 mm 4x threaded hole: M16 x 2.0, depth: approx. 20 mm center height: 240 mm hole diameter ( dividing head ): Ø 120 mm, not continuous ! used, tested ! Dimensions ( without eyebolts ): 1000 x 800 x 425 mm

6-jaw chuck, six-jaw chuck PRATT BURNERD 3260 03205 outer diameter: Ø 310 mm bore diameter: Ø 100 mm Height with jaws: 183 mm bolt circle diameter: Ø 105 mm Flange diameter: Ø 310 / 250 / 160 mm 3x stud bolt: M16 x 2,0, Length: 38 mm used, tested ! Dimensions: 310 x 310 x 225 mm

3-jaw chuck, three-jaw chuck PERTHEL outer Ø: 190 mm bolt circle Ø: 116 mm bore Ø: 56 mm height with jaws: 112 mm used, tested ! Dimensions: 190 x 190 x 115 mm

Rotary table with 4 jaw chucks PAGUS Diameter: Ø 160 mm Table height: 160 mm Rotary chuck 360° rotatable (manual, without gearbox ) with 15° detents (small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

3-jaw chuck, three-jaw chuck with flange PAGUS outer Ø: 160 mm bolt circle Ø (flange) : 105 mm bore Ø: 40 mm height with jaws: 105 mm Dimensions: 160 x 160 x 105 mm

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 Outer Ø: 200 mm bolt circle Ø : 133.5 mm bore Ø: 54 mm height with jaws: 140 mm used, tested ! Dimensions: 200 x 200 x 121 mm

3-jaw combination chuck, three-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD Outer Ø: 310 mm bolt circle Ø: 280 mm bore Ø: 98 mm height with jaws: 160 mm used, tested ! Dimensions: 310 x 310 x 160 mm

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD outer Ø: 315 mm bolt circle Ø: 234.5 mm bore Ø: 98 mm height with jaws: 155 mm (without screws) with second set of jaws ! used, tested ! Dimensions: 320 x 320 x 230 mm

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD outer Ø: 310 mm bolt circle Ø: 290 mm bore Ø: 98 mm height with jaws: 130 mm used, tested ! Dimensions: 310 x 310 x 130 mm

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD outer Ø: 375 mm bolt circle Ø: 235 mm bore Ø: 130 mm height with jaws: 192 mm (without screws) used, tested ! Dimensions: 375 x 375 x 267 mm

2-jaw chuck, two-jaw chuck with round jaws ROTO RECORD outer Ø: 160 mm bolt circle diameter: Ø 170 mm Tension pulley diameter: Ø 60 mm bore: Ø 42 mm height with jaws: 95 mm used, tested ! Dimensions: 160 x 160 x 95 mm

Surface chuck, 2 pieces HOLEX 302240 25 SK 40 - 25 - 100 SK 40 Tool: Ø 25 mm Balancing quality ( G ): 6,, 3 at 12000 rpm Cantilever length ( A-dimension ): 100 mm used, checked! 2 pieces ! Dimensions ( single wing chuck ): 170 x Ø 65 mm Dimensions ( packed ): 170 x 130 x 70 mm

Dividing head with three-jaw chuck, electro-hydraulic MAZAK AJV25/405 Three-jaw chuck Ø 315 mm hole diameter: Ø 100 mm, not continuous ! hole depth: 140 mm turntable: Ø 280 mm groove width: 14 / 24 mm groove depth: 20 mm center height 200 mm pitch 360 used, tested ! Dimensions 630 x 530 x 420 mm

Clamping device with 3-jaw chuck, three-jaw chuck RÖHM outer Ø: 250 mm height with jaws: 155 mm bore: Ø 75 mm used, tested ! Dimensions: 355 x 290 x 160 mm

Drive unit with pressure collet chuck RED BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0,55 / 0.7 kW 315 / 630 rpm 400 V 3AC Base plate: 300 x 240 x 18.5 mm hole spacing: 260 / 200 mm, hole diameter: 4xØ 13 mm / 1x Ø 18 mm groove: width: 18mm, depth: 7 mm used, tested ! Dimensions: 580 x 300 x 350 mm

3-jaw chuck, three-jaw chuck ZTM outer Ø: 155 mm flange: 130 mm bolt circle: 143 mm bore Ø: 40 mm Height with jaws: 95 mm Total height: 95 mm Feed number: 16506 Jaw number: 16506 Complete with inner and outer jaws Dimensions: 155 x 155 x 95 mm

3- Jaw chuck, three-jaw chuck PAGUS Outer Ø: 200 mm Flange:155 mm bolt circle: 174 mm height with jaws: 100 mm bore: 55 mm Square for wrench: 11.5 mm Dimensions: 200 x 100 mm

3-jaw chuck, three-jaw chuck with outer jaw PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm bolt circle:134 mm height with jaws: 123 mm feed number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 extra jaws

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

3-jaw chuck, three-jaw chuck PAGUS Ø: 380 mm bolt circle Ø : 235 mm bore Ø : 108 mm height: 180 mm Was used on a Toyoda HES52 with many accessories ! used, checked ! Dimensions: 380 x 380 x 180 mm

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

3-jaw chuck, three-jaw chuck PAGUS outer Ø: 475 mm bolt circle (flange) Ø: 172 mm bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 175 mm with second set of jaws ! used, tested ! Dimensions: 480 x 480 x 250 mm

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 Outer Ø: 475 mm bolt circle (flange) Ø: 172 bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm

Threading chuck EMUGE KS1-SK40 F0301541 Tool holder: Ø 19 / 36 mm Cantilever length ( A-dimension ): 50 mm mount: SK40 New ! Dimensions ( threading chuck ): 144 x Ø 63 mm Dimensions ( packaging ): 150 x 72 x 72 mm

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 18 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -exciting: centric -Interchangeable jaws: soft -Weight: 22 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -without interchangeable jaws: without -Weight: 4 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Taper cone: Ø 82 mm -Hole circle: Ø 105 mm -Weight: 14 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 125 mm -exciting: centric -Interchangeable jaws: soft -Weight: 6 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Clamping angle: 200 x 200 mm -centric exciting -Chuck size: Ø 200 mm -Weight: 30 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Quick change chuck: arbor MK5 -Tool holder: MK4 -Dimensions: Ø 68 x 327 mm -Weight: 4.5 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor, power chuck -Manufacturer: NT Tool, high-performance power chuck in original packaging -Type: SK40-CT20S-105 -Clamping Ø: 20 mm -Number: 2 pieces -Price: per piece -Dimension box: 240/100/H125 mm -Weight: 2 kg/piece

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 160 mm -Hole circle: Ø 136 mm -Cone: Ø 115 mm -Weight: 11.9 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 200 mm -Hole circle: Ø 175 mm -Weight: 21 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 209 mm -Weight: 21 kg

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 215 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 9 kg