chuck used for sale

3-jaw chuck, three-jaw chuck, power chuck, wedge chuck WMW Type: DKRD A2/8-315x3 Outer Ø: 315 mm bolt circle Ø : 270 mm height: 190 mm bore: Ø 80 mm used, tested ! Dimensions: 320 x 320 x 190 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRV 315x 3 ( DKRV315x3 ) Outer Ø: 315 mm bolt circle Ø : 171.5 / 240 mm height: 170 mm bore: Ø 81.5 mm used, tested ! Dimensions: 320 x 320 x 170 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRD A-315x3 outer Ø: 315 mm bolt circle Ø : 270 mm height: 153 mm bore: Ø 82 mm used ! Dimensions: 320 x 320 x 190 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Outer Ø: 250 mm bolt circle Ø : 132.5 mm height: 135 mm (without screws) bore: Ø 51 mm jaws individually adjustable by toothing ! used, checked ! without jaws ! Dimensions: 250 x 250 x 190 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 Outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 116 mm with additional 2 interchangeable jaw sets and a basic jaw set ! used, tested ! Dimensions: 160 x 160 x 160 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 Outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 135 mm with 3 additional interchangeable jaw sets ! used, tested ! Dimensions: 160 x 160 x 135 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 150 mm with 3 additional interchangeable jaw sets ! used, tested ! Dimensions: 160 x 160 x 150 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm jaws individually adjustable by toothing used, checked ! Dimensions: 335 x 170 x 160 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 220 x 165 x 160 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES outer Ø: 250 mm bore Ø:80 bolt circle: 180 mm flange: 220 mm height with jaws: 110 mm 2400 rpm with cross cone and camlock D1- 8 inch (stud M 16) 2 set of jaws (1x drill 1x rotary jaw set) 1 chuck wrench Dimensions: 250 x 250 x 195 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW TGL 30-2312 outer Ø: 200 mm bolt circle Ø : 150 mm flange Ø : 180 mm height with jaws: 153 mm jaws individually adjustable by toothing ! used, checked ! Dimensions: 200 x 200 x 250 mm

Dividing head, with four-jaw chuck, rotary table, can be used horizontally / vertically PAGUS lathe chuck: Ø 160 mm bore Ø: 42 mm height with jaws: 128 mm 360 ° rotatable pitch: 15 ° Center height: 125 mm base plate ( with lathe chuck ): 275 x 212 x 22 mm base plate ( without lathe chuck ): 275 x 130 x 21 mm all U-holes: Ø 16 mm, length: 18 mm with wrench used, tested ! Dimensions 275 x 148 x 237 mm

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -DHK: 200x3 -TGL: 30-2333 -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -interchangeable jaws -Through hole: 55 mm -Rezess: Ø 160 mm -Number: 1x feed available -Price: per piece -Weight: 16 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: clamping aid -clamping plate -Chuck size: Ø 255 mm -Weight: 20 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Cutting capacity: M3 -M12 -Bore: Ø 10 mm -Dimensions: Ø 58 x 213 mm -Weight: 1.9 kg

Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

Tapping chuck, tapping chuck, tapping chuck, milling tool, tapping attachment -Tapping chuck: Mount MK2 -Type: GH 20 MK2 -Bore: Ø 16 mm -Dimension: Ø 67 x 186 mm -Weight: 1.9 kg

Three-jaw chuck, three-jaw lathe chuck -Handover/sale: in the current condition as seen -Damage: see photos -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 190 mm -Throughput: Ø 57 mm, lining Ø 75 mm -Bolt circle: Ø 168/14 mm -Weight: 16.4 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Roto Record, three-jaw chuck recording SK50 -Chuck size: Ø 160 mm -Passage: Ø 42 mm -Weight: 12 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size diameter 195 mm -Passage: Ø 60 mm -Accessories: incl. clamping tool -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Drm. 80mm -Passage: Ø 16 mm -Bolt circle: Ø 66 mm / M6 -Accessories: incl. 2nd set of hard jaws and clamping tool -Weight: 1.7 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Transfer: as is -Chuck size: Ø 200 mm -Hole circle: Ø 134 mm -Weight: 20.7 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 22.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Hole circle: Ø 133 mm -Passage: Ø 20 mm -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 200 mm -Admission thread: M20 -Pitch: 2.5 mm -Weight: 32 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size O 200 mm -Through hole O 54 mm -Short cone 6 -according to pictures, without additional accessories -Weight 14.4kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Single and complete jaws: adjustable -Bajonet: short cone flange, cone size 6, bolt circle 133.4 mm -Passage: Ø 55 mm -Weight: 23 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 200 mm -Beeks: individually and completely adjustable -Rezess: Ø 160 mm -Hole circle: Ø 176 mm -Passage: Ø 55 mm -Weight: 18 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 160 mm -Passage: Ø 42 mm -Hole circle: Ø 133 mm -Receptacle: Short cone 6 / cone 103 - 105 mm -Weight: 10.5 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck, chuck size Ø 240 mm -Passage: Ø 77 mm -Hole circle: Ø 220 mm -Weight: 18 kg

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 60 mm -Hole circle: Ø 170 mm -Weight: 9.3 kg

As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg

As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 42 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 85 x 240 mm -Weight: 3.1 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 130 mm -Passage: Ø 30 mm -Hole circle: Ø 105 mm -Intake: short cone 5 -Weight: 6.9 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg

Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 3x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg

4-jaw chuck, four-jaw chuck WMW DH 130 x 4 ( DH130x4 ) TGL 30-2333 Outer Ø: 130 mm centering Ø: 102 mm bolt circle Ø (chuck) : 115 / 110 mm bore Ø: 29 mm height with jaws: 78 mm used, tested ! Dimensions ( lathe chuck ): 130 x 130 x 78 mm

4-jaw chuck, four-jaw chuck PAGUS Ø 138 mm outer Ø: 138 mm centering Ø: 105 mm bolt circle Ø (chuck) : 120 mm bore Ø: 37 mm height with jaws: 63 mm used, tested ! dimensions ( lathe chuck ): 138 x 138 x 83 mm

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

2 pcs. Three-jaw chuck φ 230 with inner jaws 100,- each 1 pc Three-jaw lining φ 230 with outer jaws, Emco 100,- 1 pc Three-jaw lining φ 190, inner jaws and soft jaws Recording 6 DIN 55022 100,- 1 pc Three-jaw lining φ 315, inside and outside jaws, sgt . 360,- 1 pc Three-jaw chuck, Tos, φ 100, outer jaws, 5 Din 55022, 100,- 1 pc V-bar chuck Forkardt, KL160, φ. 160, without jaw H- 75mm, Holder: 6 DIN 55022 250,- Prices: ex works !