chuck used for sale

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3- Jaw chuck, three-jaw chuck PAGUS outer Ø: 200 mm flange:155 mm bolt circle: 174 mm height with jaws: 100 mm bore: 55 mm square for key: 11.5 mm dimensions: 200 x 100 mm

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Rotary table with 4 jaw chucks PAGUS diameter: Ø 160 mm table height: 160 mm lathe chuck 360° rotatable ( manual, without gearbox ) with 15° detent ( small lever ) two levers for clamping the lathe chuck used, tested ! Dimensions: 390 x 330 x 160 mm

Morse taper / drill chuck holder PAGUS MK5

Collet holder, tool holder, tool holder, milling holder, milling tool -Collet holder: SK50 -Type: SK50 D32 A71 CNB-01 -Tensioning sleeve: Ø 25 mm -Dimensions: Ø 98 x 200 mm -Weight: 3.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 220 mm -Inside: Ø 100 mm -Dimension: Ø 220 x 70 mm -Weight: 6.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 76 mm -Take: short taper 6, cone Ø 105 mm -Dimension: Ø 210 x 65 mm -Weight: 3.5 kg

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRF A/-200x3 ( DKRFA/-200x3 ) TGL 34-185 Outer Ø: 200 mm Bolt circle Ø : 133 mm flange Ø : 175 mm Height with jaws: 230 mm Jaws individually adjustable by toothing ! New !' Dimensions: 200 x 200 x 320 mm

Precision face and boring chuck WMW A 100 - 4 ( A100-4 ) TGL 32680 ( TGL32680 ) Dimensions: 210 x 100 x 85 mm

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg

3-jaw chuck, three-jaw chuck WMW DH-B 200x3x6 ( DH-B200x3x6 ) TGL 30-2332 Outer Ø: 200 mm Bolt circle Ø : 133.5 mm Bore Ø: 54 mm Height with jaws: 140 mm used, tested ! Dimensions: 200 x 200 x 121 mm

3-jaw chuck, three-jaw chuck with flange PAGUS outer Ø: 160 mm bolt circle Ø (flange) : 105 mm bore Ø: 40 mm height with jaws: 105 mm Dimensions: 160 x 160 x 105 mm

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 50 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 210 x 85 mm -Weight: 5 kg

Chuck flange, intermediate flange for lathe chuck PAGUS Outer Ø: 200 mm Bolt circle(lathe chuck side): Ø 133,Ø 5 mm flange (lathe chuck side): Ø 106 / 103 x 14.4 mm (conical) bolt circle (machine side): Ø 174 mm flange (machine side): Ø 101 x 25 mm used, tested ! Dimensions: 200 x 200 x 52 mm

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 105 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 280 x 35 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Handover: as is -Chuck size: Ø 200 mm -Bolt circle: Ø 134 mm -Weight: 20.7 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 232/Ø 12 mm -Dimensions: Ø 250/H26 mm -Weight: 5.6 kg

3-jaw chuck, three-jaw chuck, power chuck BIAL, BISON 2404-250 outer Ø: 250 mm bolt circle Ø : 172 mm height with jaws: 167 mm max. 3000 rpm jaws individually adjustable by toothing ! New !' dimensions: 250 x 250 x 170 mm

Quick-change chuck EMUGE KSN1- MK2 ( KSN1-MK2 ) F3301102. New ! Dimensions: 130 x 50 x 50 mm

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Clamping device with 3-jaw chuck, three-jaw chuck WMW three-jaw chuck: DH - A - 200 x 3 TGL 30-2332 outer Ø: 200 mm bore Ø: 54 mm height with jaws: 105 mm base plate: Ø 310 x 21 mm Loochkreis base plate: Ø 260 mm bolt base plate: Ø 36 mm used, tested ! Dimensions: 310 x 310 x 131 mm

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm/M12 -Dimension: Ø 210/H30 mm -Weight: 5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 240 mm -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 323 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/288 mm -Dimension: Ø 323/H110 mm -Weight: 20 kg

Rotary table for lathe chuck PAGUS diameter lathe chuck: max. Ø 200 mm bolt circle lathe chuck: 140 - 180 mm flange: Ø 130 mm table height: 70 mm 360° rotatable base plate: 290 x 220 mm used, tested ! Dimensions: 350 x 300 x 80 mm

diameter: 400 mm bore: 135 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

Pneumatic power chuck, Diameter 400 mm, Big Bore 140 mm 3 jaws, centrically clamped

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling tool holders: 10 pieces MK5 mounting boring heads/reducing sleeves/spindle tools/mounting holders -Sizes: see pictures -Price/Sale: complete -Overall dimensions: 670/470/H80 mm -Total weight: 41.7 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: from a Meuselwitz lathe, chuck size 315 mm diameter -Passage: Ø 103 mm / Cone Ø 120 mm -Bolt circle: Ø 190 mm -Weight: 49 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: O 355 mm -Short taper: size 8 (139.7 mm) -Number: 1x discs available -Price per piece -Dimensions: O 355 / H175 mm -Weight: 38 kg

3-jaw chuck, three-jaw chuck with outer jaws PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm Bolt circle:134 mm height with jaws: 123 mm chuck number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 Extra Jaws

Number of units: 2 Type: 51:36 388/01 # From stock liquidation Location: Stuttgart

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 170 mm -Dimensions: Ø 250/38 mm -Weight: 9 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 225 mm -Feed flange: M55x4 -Tip: 57 mm -Passage: Ø 50 mm -one sentence: hard-hitting jaws -Weight: 20 kg

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

buckles: 4 knives: 0 max. paper size: 42 x 63 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-jaw chuck, four-jaw lathe chuck -Chuck size: Ø 250 mm -Bolt circle: Ø 230 mm -Recess:Ø 210 mm -Passage: Ø 80 mm -Scope of delivery: as per pictures, without additional jaws -Weight: 19 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Recess: Ø 160 mm -Bolt circle: Ø 180 mm -Passage: Ø 55 mm -Weight: 14 kg

three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Short taper holder: Short taper 6 Ø 105 -Passage: Ø 77 mm -one set: hard interchangeable jaws -Weight: 28 kg

3-jaw chuck, three-jaw chuck PAGUS Ø: 380 mm bolt circle Ø : 235 mm bore Ø : 108 mm height: 180 mm Was used on a Toyoda HES52 with many accessories !' used, tested ! Dimensions: 380 x 380 x 180 mm

Collet chuck SK 30 With milling tool

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Hole size: Ø 216 mm -Recess recording: mm -Bolt circle: mm -Through hole: 50 mm -Soft interchangeable jaws -Dimensions: Ø 216/H75 mm -Weight: 18.7 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

3-jaw chuck, three-jaw chuck PAGUS outer Ø: 475 mm bolt circle (flange) Ø: 172 mm bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 175 mm with second set of jaws !' used, tested ! Dimensions: 480 x 480 x 250 mm