chuck used for sale

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over transverse guideway370 mmSwing diameter over guide ways700 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Transverse stroke276 mmLongitudinal stroke755 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 N ...

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmS ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ap ...

HAAS TM-1P CNC vertical machining center was manufactured in 2014 in the United States. This extremely easy-to-use machine with extensive machining capabilities ensures efficient and precise machining of workpieces over its entire lifetime. The machining process is performed on a stable work table using reliable components in the form of cutting tools and a high-speed spindle. In addition, each tool is continuously measured by an extremely accurate RENISHAW measuring probe to ensure that the process runs continuously and without any interruptions. All machining parameters are programmed in the intuitive HAAS CNC control. The perfectly optimised controller allows for the creation of advanced machining programmes in just a few steps, without knowledge of G-codes. The HAAS TM1P CNC machining center is also offered with optional equipment which includes, among others, milling heads, colle ...

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170 mm ● Rapid feeding speed 4,000 mm/min  ...

Manufacturer MORI SEIKI Model NT4250DCG/1500S Year 2008 CNC MSX-701 III Capacities Max swing of workpiece 730 mm. Max swing over cross slide 730 mm. Distance between centers 1.862 mm. Max turning diameter 660 mm. Max turning length 1.542 mm. Ø Spindle Bar Diameter 80 mm. Travels X1 Travel 750 mm. Z1Travel 1.550+100 mm. X2 Travel 195 mm. Z2 Travel 1.525 mm. Y Axis INCLUDED Y Travel ± 210 B Travel ± 120 Feedrates Rapid traverse rate (X1, Z1 Axis) 50 m./min. Rapid traverse rate (X2 Z2 Axis) 30 m./min. Rapid traverse rate (Y Axis) 30 m./min. Rapid traverse rate spindle 2 ZS 30 m./mm. Rapid traverse rate B axis 40 rpm Rapid traverse rate C axis 250 rpm Spindle 1 Speed 4.000 rpm Number of speed ranges 2 Nose JIS A2-8 C axis in spindle 1 INCLUDED Min indexing increment spindle 1 0.0001º Power 26/22 kW Max torque 724 Nm 3-jaw automatic chuck KITAKAWA B-2 ...

turning diameter: 660 mm turning length: 1.542 mm control: MSX-701 III greates pass round over bed: 730 mm spindle passage: 80 mm dist. between centers: 1.862 mm X1: 750 Z1: 1.550+100 mm X2: 195 mm Z2: 1.525 mm y-axis: +-210 mm b-axis: +- 120 mm coolant tank: 640 l : Number of spindles: 2 St. total power requirement: 90 kVA weight of the machine ca.: 25 t dimensions of the machine ca.: 6.800 x 3.200 x 2.900 mm Rapid traverse rate (X1, Z1 Axis) 50 m./min. Rapid traverse rate (X2 Z2 Axis) 30 m./min. Rapid traverse rate (Y Axis) 30 m./min. Rapid traverse rate spindle 2 ZS 30 m./mm. Rapid traverse rate B axis 40 rpm Rapid traverse rate C axis 250 rpm Spindle 1: Speed 4.000 rpm Number of speed ranges 2 Nose JIS A2-8 C axis in spindle 1 I Min indexing increment spindle 1 0.0001º Power 26/22 kW Max torque 724 Nm 3-jaw automatic chuck KITAKAWA B-212 A8 Chuck size 304 mm. Chuck  ...

GeneralTurn- mill machining centre; Control: Siemens sl Operate3G without ShopTurn appr 2 channel Tool magazineNumber of tools38 Max. tool length250 mmMax. tool diameter70 mmMax. tool weight3 KgB-axis Turning-milling spindleSwivelling range+/- 120 degreeSpeed range B3100 rpmAngular value, min.1 degreeTurning-milling spindleSpindle taperCapto C5 Drive power (100% DC)5,5 kWSpindle speed-20000 rpmDrive power (40% DC)7,5 kWTorque (100% DC)22 NmTorque (40% DC)30 Nmangular value, min.5 degreelocking moment700 NmB-axis counter spindlePositioning angle B3-axis, in 5 degree steps0 - 225 degreeSpeed range B340 rpmSlide 3Longitudinal stroke665 mmRapid traverse Z36 m/minSlide 1Longitudinal stroke454 mmTransverse stroke380 mmRapid traverse in X40 m/minY axis, vertical+/- 105 mmRapid traverse in Z50 m/minRapid traverse in Y40 m/minHeadstock, rightClamping chuck Ø140 mmSpindle bore38 mmSpindle diametr ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

turning diameter:220 mm turning length:200 mm control:Fanuc 0i-TF Manual Guide bar material dia.:26 mm spindle speeds:6000 1/min. spindle drive:7,5/11 kW rapid speed:20 m/min travel -x axis:155 mm travel - z:200 mm CNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD turret:12 (hydr.) fach hydraulic unit:mit Lufkühlung hollow chuck:hydraulisch, 150 mm tool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan bar loader:optional Tool setter:manuel soft jaw:1 Satz BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm) Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tails ...

turning diameter over bed: 410 mm turning diameter over slide rest: 255 mm turning length: 1000 mm turning dia. in gap: 580 mm spindle bore: 52 mm spindle turning speed range: 2n / 30 - 3000 U/min spindle taper: MK6, Camlock D1-6 travel of cross-slide: 225 mm number of feeds: 17 longitudinal feeds:: 0,05 - 1,7 mm/U Whitworth-thread: 45 / 72 - 2 TPI pitch in mm: 42 / 0.2-14 mm pitch in module: 18 / 0.3 - 3.5 MP tailstock quill diameter: 50 mm tailstock quill stroke: 120 mm digital readout: Newall 3-jaw-chuck diameter: 200 mm 4-jaw-chuck diameter: 300 mm centers: 2 x MK4 set of change wheels: Set total power requirement: 5,5 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 1,9 x 0,85 x 1,32 m Upper Slide - travel: 140 mm Machine Lamp: Halogen Reducing Sleeve: MK 6 - MK 4 A comprehensive range of quality centre lathes characterised by wide versatility, high accuracy and  ...

CNC control: FANUC 0i-TF+ with 15" LCD color display and Manual Guide i -12-fold tool turret with BMT45 holders, 24-fold indexing -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the counter spindle -Parts catcher with parts conveyor belt inside -Automatic surveying arm -Transformer -CE conformity -English machine manuals -Main spindle: 3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle: 3-jaw power chuck Ø135 mm (5") for spindle head standard: Flat-110; Make: SAMCHU ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

CNC control: FANUC 0i-TF+ with 10.4"/15" LCD color display and Manual Guide i -12-fold tool turret with BMT65 mounts -Coolant device with 10 bar delivery pressure incl. coolant gun -WTO Holder Package -Oil skimmer with endless belt for extraneous oil separation -Warning light with 3 colors -Workspace lighting -Bar feeder interface for connecting loading magazines -Chip conveyor, ejection right -Part ejector on counter spindle incl. cooling by the spindle -Chuck blow-out device on the main spindle -Parts catcher with collection box -Automatic surveying arm -Transformer -CE conformity -English machine manuals -3-jaw power chuck Ø210 mm (8") for spindle head standard: A2-6; Make: SAMCHULLY incl. 1 set of soft and 1 set of hard jaws -Counter spindle 8": 3-jaw power chuck Ø170 mm (6") for spindle head standard: A2-5; Make: SAMCHULLY, incl. 1 set of soft and 1 set of hard  ...

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

Machine Details Stock number 1105-03812 Machine type CNC turning and milling center Brand GILDEMEISTER Type CTX beta 500 Year of construction 2014 Control type CNC Control 840 D SL SIEMENS Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from site Price Technical details Turning diameter 410 mm Turning length 850 mm Control 840 D SL SIEMENS Circumferential diameter over bed 500 mm Speed range - main spindle 25 - 5,000 min/-1 Drive power - main spindle 25 / 34 kW torque 280 Nm C-axis 0.01 ° Spindle nose 170 h5 chuck diameter 210 mm Chuck diameter 250 mm Spindle diameter in the front. Bearing 130 mm Spindle bore 87 mm bar diameter 77 mm Number of tool positions 16 pos. Number of driven tool stations 16 pos. Drive power applied WZ stations 11.3 kW Speed range - antr. Tool stations max. 4.000 min -1 Tool holder VD ...

Precision four-jaw chuck, chuck, face plate, 4-jaw chuck -Manufacturer: WMW Niles, four-jaw chuck type DHK-B/8-250x4 -Chuck size: O 250 mm -Passage: O 80 mm -Bolt circle: O 135 mm -Intake: short taper 6 -Weight: 35kg

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Four-jaw chuck: Chuck size: Ø 250 mm with tube turning device -Throughout: Ø 80 mm -Pitch circle: Ø 226 mm -Weight: 25 kg

Assortment of tool holders, 9 pieces SCHUNK, EMUGE, GÜHRING 2x Hydro expansion chuck Ø 16 mm SCHUNK 204055 with deep drill Ø 16 mm, length: 215 mm 2x Hydro expansion chuck Ø · 12 mm SCHUNK 204054 with deep drill Ø 12 mm, length: 240 mm 1x Hydro expansion chuck Ø 12 mm SCHUNK 204054 1x Hydro expansion chuck Ø 10 mm SCHUNK 204053 2x collet holder ERC32 EMUGE Type: Softsynchro® 3 with tap M18 x 1.75 1x hydraulic expansion chuck Ø 12 mm GÜHRING GM300, 4399 12.263 with step drill Ø 7 / 12 mm, length: 25 mm mounting type, machine side: HSK-A63, DIN 69893 A Retail sale on request ! used, tested ! Dimensions ( packaging ): 400 x 200 x 70 mm

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle bore102 mmSpindle diametre on front bearing160 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Number of driven tools12 Shank diametre according to DIN 6988040 mmSpeed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

Swing over bed – 600 (Ø 23.62) Diameter × length – Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter – Ø 380 (Ø 14.96) Max. travel range of Z/X axis – 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore – STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed – STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter – STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations – OPT: 8 STD: 10 Coolant Chip conveyor Power requirement – 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) – 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) – 5200 kg (11440 Ibs) this extra informa ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

Year of construction: 2002 CNC controller: FANUC 18iTA Capacity X-axis travel mm: 565 Y-axis travel mm: ±80 Z-axis travel mm: 1.077 Turning length mm: 1.020 Max. turning diameter mm: ø 550 Swing over cross-slide mm: 599.4 Tool magazine Magazine places: 120 Tool length max. mm: 280 Tool diameter max. mm: 90-120 Tool weight max kg: 7 Upper turret Number of tool slots St .: 1 Speed ​​driven tools RPM: 8.000 Lower turret Number of tool slots St .: 12 Speed ​​driven tools RPM: 4.000 Indexing time s: 0.26 Main spindle Speed ​​spindle rpm: 4.500 Drive power spindle kW: 22/15 Spindle bore mm: 73 Chuck type: Hollow Chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-6 Counter spindle Speed ​​spindle rpm: 6.000 Drive power spindle kW: 15/11 Spindle bore mm: 56 Chuck type: Hollow Chuck (6") Manufacturer: KITA ...

Description: Consisting of a three-jaw chuck (diameter: 220 mm), another three-jaw chuck (diameter: 160 mm), a third three-jaw chuck (diameter: 100 mm), a fourth three-jaw chuck (diameter: 150 mm) and another three-jaw chuck (diameter: 160 mm) weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 200 mm

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 210i-T Technical data Distance between centres: 2000 mm Turning diameter over cross-slide: 370 mm Swing over bed: 554 mm Spindle nose: D1-11 Spindle hole: 104 mm Maximum turning length: 2000 mm Cross slide: Longitudinal travel (Z-axis): 1920 mm Transversal strocke (X axis): 290 mm Main spindle: Taper in spindle: Camlock: D1-6 CAMLOCK Spindle speeds: number (steps): 3 from: 16 rpm up to: 1800 rpm Taper in tailstock: Morse taper: 6 MT Spindle stroke: 178 mm Spindle diameter: 95 mm Rapid traverse:: 10 m/min Spindle motor: 11 / 7.5 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3300 mm Width: 1800 mm Height: 1700 mm Various accessories: 3-jaw chuck diameter: 400 mm 4-jaw chuck diamet ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 5 mm Max. internal grinding diameter: 250 mm Grinding depth: 200 mm Workpiece spindle speeds: stepless from: 15 rpm up to: 1500 rpm Max. angle: +/-15 ° Spindle hole: 50 mm Max. distance from workpiece spindle to grinding spindle holder: 770 mm Table speeds: stepless from: 0 m/min up to: 10 m/min Workpiece spindle motor: 0.5 kW Drive for internal grinding spindle: 3 kW Machine´s weight about: 2250 kg Various accessories: Wheel trueing attachment 3-jaw chuck diameter: 200 mm 3-jaw chuck diameter: 250 mm 4-jaw chuck diameter: 250 mm Set of jaws hard Set of jaws Macnetic chuck diameter: 200 mm Steady Set of collets Set of grinding arbors

form9 DP-18-VARIO Bench drilling machine Lxwxh 540 x 390 x 950 mm Table size 240 x 240 mm Table adjustment 45 ° - 0-45 ° Speed 440 â 2580 min-1 Quick clamping drill Chuck, Chuck clamping range / type 1-16 mm Distance from Chuck to table maximum 325 mm Distance from the drill Chuck to the frame base of 495 mm Motor 230-240 V Motor power 550 W Dimensions L x W x H 540 x 390 x 950 mm Weight net / gross 38.5 / 41 kg G & SC-5906807901

The SCHIESS RF 30 gear hobbing machine is a specialist machine for machining large gear wheels. The machine is designed for machining of gears by processing individual pitches of a gear wheel. The milling machine processes a workpiece with diameter from 60 mm to 3500 mm and a weight of up to 25 t. The spindle of the milling machine rotates at a speed from 6 to 69 rpm. The SCHIESS RF 30 machine is designed for milling with: – cylindrical milling cutters in steel / cast iron up to module: 24/30 – disc milling cutters in steel / cast iron up to module: 33/42 – end mills in steel / cast iron up to module: 33/42 50/65 Technical data of the SCHIESS RF 30 milling machine - largest diameter of the milled workpiece: 3500 mm - llargest diameter of the milled workpiece in the circumferential method and with tooth pitch up to 45 3000 mm - lsmallest diameter of the milled part: 60 m ...

turning diameter: 720 mm turning length: 4000 mm control: Siemens 805 turn - diameter over facing slide: 360 mm spindle diameter: 100 mm spindle passage: 100 mm 3-jaw-chuck diameter: 400 mm 4-jaw-chuck diameter: 250 mm steady: 360 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m 3- jaw chuck diameter: 400 mm 4- jaw chuck diameter: 250 mm Fixed bezel diameter: 360 mmIncludes: 4 jaw turrets and coolant. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 500 mm hollow: 135 mm weight: kg Diameter 230 mm Face plate, face plate chuck, four-jaw chuck, facing chuck - Chuck size Ø 230 mm - Through hole Ø 90 mm - Weight 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 255 mm bore stroke: 110 mm spindle speed:: 80 - 3490 U / min table-size: 400 x 400 mm spindle taper MT: 4 turning speed range:: 2 x 12 Stufen column diameter: 88 mm base plate: 600 x 370 mm total power requirement: 1,1 kW weight of the machine ca.: 155 kg dimensions of the machine ca.: 1,15 x 0,65 x 0,32 m Topline type heavy duty column drilling machine. For easy, frequent use. The drill chuck cover is made of high quality polycarbonate, and complies with the latest safety standards. It is equipped with an autostop switch. Separate emergency stop can be reached easily. Fitted out with a cooling table, softgrips,, adjustable depth stop and quick-acting drill chuck. The machine is equipped with a thermal cut-out. quick-acting drill chuck 1- 16 mm engraved nonius machine stops when drill chuck cover is opened depth stop autostop switch when o ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 15 mm Grinding depth: 75 mm Centre height: 60 mm Distance between centres: 125 mm Max. work piece diameter: 80 mm Workpiece spindle speeds: stepless from: 150 rpm up to: 1500 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: up to: 120000 rpm Grinding table travel: max: 225 mm Table speeds: stepless from: 1 m/min up to: 8 m/min Voltage 50 Hz 3x: 380 Volt Workpiece spindle motor: 0.3 kW Machine´s weight about: 570 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1400 mm Various accessories: Grinding wheel dressing device Frontal grinding device 3-jaw chuck diameter: 75 mm 3-jaw chuck diameter: 80 mm 4-jaw chuck d ...

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Short taper mount: Ø 106 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Flange: Ø 200 mm -Hole circle: Ø 170 mm -Through hole: Ø mm -Weight: 60 kg

Four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 200 mm -Passage: Ø 60 mm -Bolt circle: Ø 175 mm -Weight: 13.8kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 400 mm -Cone: Ø 102 - 82 mm -Intake: thread M152 x 4.5 -Through hole: Ø 82 mm -Weight: 54 kg

Face plate, face plate chuck, four-jaw chuck, face lathe chuck -Face plate: chuck size Ø 445 mm -Through hole: Ø 77 mm with thread pitch 4mm, see photo -Weight: 34 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Face plate: Chuck size Ø 410 mm -Recording: see photos -Through hole: with thread M72x4 -Weight: 38 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short taper 6 -Hole circle: Ø 133 mm -Through hole: Ø 95 mm -Weight: 40 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 400 mm -Through hole: Ø 28 mm -Recording: approx M77 x 6 -Weight: 41 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 510 mm -Shot: short taper 8 -Hole circle: Ø 170 mm -Through hole: Ø 93 mm -Groove width: 20 mm -Weight: 60 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 320 mm -Take: Camlock short cone 8 -Hole circle: Ø 170 mm -Through hole: Ø 100 mm -Weight: 54 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 450 mm -Taper holder short taper: 6 -Inside diameter: 105 mm -Hole circle: Ø 133 mm -Weight: 52 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 415 mm -Inside diameter: 105 mm -Hole circle: Ø 172 mm -Weight: 49 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 500 mm -Taper holder short taper: 6 -Inside diameter: 95 mm -Hole circle: Ø 133 mm -Weight: 82 kg