We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,323 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Fmax 6000 daN, nmax 4000 min-¹ External 250 mm, Centering 220 mm, DIN 6353 Size 8, Thread M30 Guide pin 100
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg
used
Power chuck øOuter 800mm • Centrifugal force compensation for high spindle speeds • Proofline® chuck = fully sealed – low maintenance STANDARD EQUIPMENT • Chuck: 1 set of soft attachment jaws, see picture • 1 compensating stroke regulating wrench • Low maintenance 6-jaw power chuck with 2+2+2 tension. The high-precision machining of thin-walled components. The 2+2+2 compensation mechanism of the chuck Enables the clamping of thin-walled components Clamping force to 6 points, reduces radial deformation. - Centrifugal force compensation for high speeds; -Low maintenance and other benefits The mounting flange is A2-KK15
used
Hand chuck three-jaw chuck FORKARDT, Type:315 Supplied with / without clamping flange Flange for milling or drilling table (option 150,00€) Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm Included in delivery: short, modified FORKARDT base jaws FGB-315 with reversible top jaws. The mounting flange can be fixed on the milling or drilling table. Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Countertop jaws with clear signs of wear. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used
As good as new three-jaw chuck FORKARDT F+250. Wedge bar chuck Three-jaw chuck incl. 3 snap fasteners Three-jaw chuck incl. flange ♦ 4 x Fastening bolts, spindle mounting flange - bayonet lock ♦ Tension wrench available. Pictures: Three-jaw chuck No. 1628855 ♦ incl: flange mount DIN 55027 - J8 ø 139 mm. ♦ Without base jaws and top jaws: (option 170,00€) ♦ Without feed key not included: (option if available) Due to the weight, the lining, should only be can be picked up or sent by a freight forwarder. If you have any questions, please do not hesitate to contact us.
used
very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 21 mm -Dimensions: see photo techn. drawing -Dimensions: 76/85/H53 mm -Total weight: 1,6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 92/97/H67 mm -Total weight: 2.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg
used
3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 3 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 3600 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm
used
4-jaw chuck, four-jaw chuck, lathe chuck WMW, NILES DH-W/5-160 x 4 TGL30 2332 outer Ø: 160 mm bore: Ø 42 mm speed: max. 2900 rpm centering Ø: 78,5 / 82.5 mm, depth: 17 mm ( conical ) bolt circle Ø (chuck) : 105 mm 4x threaded hole: M10 x 1.5, depth: 30 mm height with jaws: 106 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 160 x 160 x 106 mm dimensions ( packaging ): 180 x 180 x 110 mm
used
3-jaw chuck, three-jaw chuck BISON 3204-200 outer Ø: 200 mm bore: Ø 55 mm br />
used
4-jaw chuck, four-jaw chuck, lathe chuck BISON 3604-200 outer Ø: 200 mm bore: Ø 55 mm br />
used
3-jaw chuck, three-jaw chuck, lathe chuck WMW, NILES DH-W/8-250 x 3 TGL30 2332 outer Ø: 250 bore: Ø 80 mm speed: max. 2400 rpm centering Ø: 135 / 139 mm, depth: 19 mm (conical) bolt circle Ø (chuck) : 170 mm 4x threaded hole: M16 x 2.0, depth: 32 mm height with jaws: 129 mm including chuck wrench, second set of jaws and 4 mounting screws New, preserved ! dimensions ( lathe chuck ): 250 x 250 x 129 mm dimensions ( packaging ): 260 x 260 x 140 mm
used
3-jaw chuck, three-jaw chuck RÖHM 200/3 outer Ø: 200 mm bore: Ø 55 mm < br /> speed: max. 4000 rpm flange diameter: Ø 160 / 200 mm bolt circle Ø (chuck) : 105 mm 3x Threaded hole: M10 x 1,5, Depth: 25 mm Height with jaws: 104 mm including chuck wrench, second set of jaws and 3 fastening screws New, preserved ! Dimensions ( lathe chuck ): 200 x 200 x 105 mm Dimensions ( packaging ): 210 x 210 x 120 mm
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 120/130/H85 mm -Total weight: 6,2 kg
used
Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg
used
As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:
used
Three-jaw chuck, three-jaw lathe chuck, scroll chuck -Manufacturer: TOS, three-jaw chuck Chuck size Ø 80 mm -Passage: Ø 16 mm -Bolt circle: Ø 70 mm -Weight: 1.2 kg
used
Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, keyless drill chuck, CNC short drill chuck -Manufacturer: WTE, keyless drill chuck CNC short drill chuck with coolant supply -Type: 47.296.30.13 -Receptacle: Ø 30 mm -Clamping Ø: 0.5-13 mm -Dimension: 137/68/H62 mm -Weight: 1.7 kg
used
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 315mm for power chucks on request Manufacturer: (FORKARDT-RÖHM-SCHUNK_KITAGAWA) Base jaws in good functional condition: Base jaw type: Helical toothing Metrics: Width: 32 mm Length: 125mm Height: F-groove: 12mm Bridge: 26mm Hole spacing: 54mm Thread: M12 x 1.5 mm Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
used
used-tested base jaws for three-jaw chuck - wedge rod chuck size approx. ø 250mm for power chucks on request Manufacturer: (SMW Autoblock; SCHUNK; KITAGAWA; REISHAUER) Base jaws in good functional condition: KNCS250; QJ310; RHU250; THW; Schunk-Rota G250 Base jaw type: Helical toothing Metrics: Width: 26 mm Length: 104mm Height: F-groove: 12mm Bridge: 20mm Hole spacing: 40mm Thread: M12 Weight / per set: 3.5kg Supplied with or without screws There are several sets in stock. (New or tested-used)
used
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks -Outside: Ø 280 mm -Inside: Ø 105 mm -Recording cone: 87 140 mm
used
3-jaw chuck, three-jaw chuck, lathe chuck, without jaws RÖHM 350/3 outer Ø: 350 mm bore: Ø 115 mm flange diameter: Ø 290 / 350 mm bolt circle Ø (chuck) : 318 mm 3x threaded hole: M16 x 2,0, Depth: 40 mm Height: 104 mm used, tested ! dimensions ( lathe chuck ): 350 x 350 x 104 mm
used
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Type: PH3/3 -Square: 7 x 7 mm -Bore: Ø 9 mm -Dimensions: Ø 80 x 225 mm -Weight: 3.0 kg
used
As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:
used
Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: rotating jaw set base jaws for four-jaw chucks -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 130/135/H43 mm -Total weight: 4.1 kg / 4.8 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 40 mm -Dimensions: see photos -Quantity: 12x quick-change chucks available -Price per piece -Dimensions: Ø 72 x 215 mm -Weight: 2.1 kg/pc.
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK4 / 42 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 85 x 240 mm -Weight: 3.1 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 32 mm -Dimensions: see photos -Quantity: 14x quick-change chucks available -Price per piece -Dimensions: Ø 62 x 175 mm -Weight: 1.2 kg/pc.
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, quick-change chuck mount: MK2 / 26 mm -Type: FW2 TGL 30 21212 -Quantity: 2x quick-change chucks available -Price per piece -Total dimensions: Ø 50 x 143 mm -Weight: 0.6 kg
used
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: chuck size Ø 130 mm -Passage: Ø 30 mm -Hole circle: Ø 105 mm -Intake: short cone 5 -Weight: 6.9 kg
used
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW ABW, tapping chuck holder MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 264 mm -Weight: 3.7 kg
used
Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Tapping chuck: thread cutting attachment -Cutting performance: -Recording: MK3 -Bore: Ø 23 mm -Quantity: 3x thread cutting chucks available -Price per piece -Dimensions: Ø 110 x 325 mm -Weight: 8,0 kg/pc.
used
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: ABW, tapping chuck holder MK3 -Type: GB3a -Cutting capacity: M12 -M24 -Bore: Ø 33 mm -Quantity: 2x cutting chuck available -Price per piece -Dimensions: Ø 80 x 257 mm -Weight: 3.7 kg/pc.
used
Description: Diameter: 250 mm Speed: max. 4200 rpm weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 250 x 250 x 200 mm
used
Description: Max. Speed: 5200 rpm Max. actuated force: 6000 daN Chuck diameter: 250 mm Approx. Onsite Dimension. (l x w x h): 350 x 300 x 250 mm, weight approx.: 70 kg
used
Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change insert, collet chuck, reducing sleeves, clip-on holder -Quick-change chuck: Recording: MK3 / 28 mm -Dimensions: see photos -Quantity: 1x quick-change chuck available -Dimensions: Ø 58 x 190 mm -Weight: 1.1 kg
used
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 13 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg
used
Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Manufacturer: WMW, tapping chuck holder MK2 -Type: A2 MK2 -Bore: Ø 12 mm -Dimensions: Ø 70 x 267 mm -Weight: 3.3 kg
used
Description: Consisting of 5 pieces Diameter: 250 mm, 240 mm, 160 mm, 160 mm and 200 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm, weight approx.: 100 kg
used
4-jaw chuck, four-jaw chuck WMW DH 130 x 4 ( DH130x4 ) TGL 30-2333 Outer Ø: 130 mm centering Ø: 102 mm bolt circle Ø (chuck) : 115 / 110 mm bore Ø: 29 mm height with jaws: 78 mm used, tested ! Dimensions ( lathe chuck ): 130 x 130 x 78 mm
used
4-jaw chuck, four-jaw chuck PAGUS Ø 138 mm outer Ø: 138 mm centering Ø: 105 mm bolt circle Ø (chuck) : 120 mm bore Ø: 37 mm height with jaws: 63 mm used, tested ! dimensions ( lathe chuck ): 138 x 138 x 83 mm
used
4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, NILES DHK 315 x 4 ( DHK315x4 ) TGL 30-2333 < br />outer Ø: 315 mm centering Ø: 265 mm bolt circle Ø (chuck) : 290 mm bore Ø: 95 mm height with jaws: 160 mm including 2x chuck wrench jaws individually adjustable and rotatable used, tested ! dimensions ( lathe chuck ): 315 x 315 x 160 mm