We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,247 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 430 mm -Short taper mount for: bayonet mount, taper size 6 -Hole circle: Ø 133.4 mm -Weight: 72 kg
used
Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used
used
diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price
used
RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...
used
Drill chuck, keyed drill chuck -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2 -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg
used
Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !
used
3-jaw chuck bison, new modell 3544 steels Camlock 55029 - 11 drilling 136 mms
used
Three-jaw Chuck Forkardt compensating voltage -Verschiebeweg 35 mm -Jaw stroke 2, 5 mm Radial compensation ability 0.5 mm Speed 5000 RPM Lining very good condition dating back to location resolution of a grinding machine manufacturer New price ca 25000 euro Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.
new
Plan disc Bison New in original packaging
new
Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11
used
Three-jaw chuck diameter 240mm
used
Original packs a set
new
Various guide rifles
used
Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new
new
CNC lathe type 10"/ 250mm Recording A2-8" with soft top jaws, tails and bolts Max speed 2800 rpm Suit thread M60 ( Interchangeable )
used
tool clamping area: 300x55x85 mm weight: 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
tool clamping area: 300x55x85 mm weight: 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug
used
chuck for 25 mm shafts total height 170 mm
used
tool clamping area: 200x55x195 mm weight: 0,01 t - Multifix tool holder, 5 pcs. like new, 2 pcs. less used. --- price per piece ---- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking
used
Chuck diameter: 0 mm Turning diameter: 970 mm Number of chucks: 2 MACH-id 5587 MAKE DeMoor TYPE 825 S-360 YOP 1975 SPECIFICATIONS Swing over bed Ø 970 mm Swing over cross slide Ø 700 mm Spindle bore 360 mm Spindle power 22 kW Stroke pinole 360 mm Spindle taper 6 Mk Speeds / ranges 28 - 500 Rpm DIMENSIONS Length 10.000 mm Width 2.200 mm Height 2.300 mm Weight   ...
used
Chuck flange, chuck flange, intermediate flange for lathe chuck and face plates WMW outer- Ø: 390 mm height: 110 mm machine side: flange: Ø 125 / 168 mm (inside / outside) female thread: M120 x 6.0 Length: 60 mm 2 x locking thread: M10 x 1.5 lathe chuck side: 2 x slotted holes: Ø 28 x 90 mm, bolt circle: 210 / 334 mm 2 x bore: Ø 45 mm, bolt circle: 282 mm 2 x bore: Ø 21 mm, bolt circle: 235 mm 1 x bore: Ø 25 mm, bolt circle: 215 mm short cone: Ø 194 / 196 mm x 10 mm suitable face plate see MMZ666 ! used, tested ! Dimensions: 390 x 390 x 110 mm
used
- CNC : Fanuc 32 - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 165 [mm] - Number of Turret positions : 2 X 8 - X/Z stroke : 130 / 145 [mm] - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.400 [kg] - Interface : USB / PCMCIA - Tool monitoring - Coolant tank - Chip conveyor - Workpiece loading robot : 1 - Max. workpiece weight : 2x 3,0 [kg] - Max. workpiece diameter : 120 [mm]
used
Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg
used
Two-jaw chuck, 2 jaw chucks, vice, face plate -exciting: centric -Chuck size: Ø 200 mm -Weight: 19 kg
used
Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Chuck size: Ø 195 mm -interchangeable jaws -Weight: 12 kg
used
Lathe driver, center turning device -Outer: Ø 315 -Cone: Ø 105 mm -Hole circle: Ø 135 mm -Weight: 20 kg
used
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Dimensions: Ø 220/H90 mm -Weight: 9.4 kg
used
Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg
used
used
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Cone diameter: 106 mm -Hole circle: Ø 4 x 160 mm -Weight: 8 kg
used
Flange mount -Chuck flange for: jaw chuck -Outer diameter: 270 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 21 kg
used
diameter: 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg
used
Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg
used
Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Adjustment: SK50 -1x clamping sleeve: Ø 16 mm -Weight: 4.5 kg
used
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg
used
3-jaw wedge bars lathe chuck FORKARDT TYPE F+160 No. 1659 181 identical Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short cone DIN 55022 Size 6 1 set of feed jaws consisting of basic jaws and hard attachment step jaws for turning 1 set of feed jaws consisting of basic jaws and soft attachment step jaws for turning - central adjustment Weight: 11 kg good condition; used
used
2 pcs. Three-jaw chuck φ 230 with inner jaws 100,- each 1 pc Three-jaw lining φ 230 with outer jaws, Emco 100,- 1 pc Three-jaw lining φ 190, inner jaws and soft jaws Recording 6 DIN 55022 100,- 1 pc Three-jaw lining φ 315, inside and outside jaws, sgt . 360,- 1 pc Three-jaw chuck, Tos, φ 100, outer jaws, 5 Din 55022, 100,- 1 pc V-bar chuck Forkardt, KL160, φ. 160, without jaw H- 75mm, Holder: 6 DIN 55022 250,- Prices: ex works !
used
Chuck diameter: 1400 mm Chuck bore: 800 mm Number of jaws: 8 Horizontal: Horizontal Diameter: 1400mm Centre height:800mm Length: 1400mm Width: 1200mm Height: 1400mm Weight: 2500kg
used
Four-jaw chuck, four-jaw lathe chuck, precision four-jaw chuck, chuck, faceplate, 4-jaw chuck -Manufacturer: Röhm, Precision four-jaw chuck Ø 260 mm -Passage: Ø 70 mm -Bolt circle: Ø 105 mm -Recording: Short cone 5 -Jaws: individually and fully adjustable -Weight: 27.4 kg
used
diameter:315 mm Speed:max. 2400 min. -1 weight of the machine ca.:25 kg
used
diameter:210 mm weight of the machine ca.:0,05 t turning speeds:4200 Bore:75 mm clamping diameter:254 mm dimensions of the machine ca.:0,6 x 0,5 x 0,4 m 2-jaw power operating chuck with draw pipe and various jaw sets.
used
used
1/2 inch connection wingspan 41275 mm Outer ° 40.5 mm Length (closed) 89 mm female thread 1/2" - 20 UNF
used
Wingspan1 - 10 mm Internal thread1/2" - 20 UNF Outer - Ø42.7 mm Length (closed) 61 mm Weight 0.2 kg. This lot has a suggested retail price of €120.96
used
Quick change chuck, 3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck REISHAUER HF 150 H15 60597 Outer Ø: 150 mm bore: 39 mm, depth: 100 mm Height of jaws: 39 mm shaft: Ø 48 mm, length. 305 mm used, checked ! Dimensions: 467 x 150 x 150 mm
used
Wingspan: 1 - 13 mm Internal Thread: 1/2" - 20 UNF Outer Ø: 42.8 mm Length (closed): 89 mm Weight: 0.5 kg This lot has a suggested retail price of €63
used
Wingspan 1 - 13 mm Outer ° 42.8 mm Length (closed) 89 mm internal thread 3/8"-24 UNF. This lot has a suggested retail price of €147