chuck rohm used for sale

Offered out of insolvency is a ready-to-use tapping machine Manufacturer: Flott Model SB 15 GL Built in 1989 Masch.No.34177063 Specifications: Cutting capacity M2-M12 Recording MK 2 Pinol stroke 80mm Projection 200mm Chuck Bilz WFP 1 + inserts Drill chuck Röhm 0-10mm Foot switch Digital display Pinolhub Single continuous cycle Emergency stop Speeds from 80-3150rpm 380 volts Motor power 0.75KW max. dimension between table and holder 380mm Total height approx. 1700mm Accessories: 8 pcs lead screw--pitch-1.5-1.25--1.75--0.8--0.7--0.5--0.45--1.0 Operating instructions Weight approx. 200kg

diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 75 mm weight: 40 kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø75mm - Weight: 40kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm hollow: 105 mm weight: / kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø105mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Monforts RNC7 Type of machine: CNC lathe Manufacturer: Monforts Model: RNC 7 Year of manufacture: 1991 Control: Fanuc Technical data: Travel X/Z 415/1100mm, tool measurement, tailstock, Röhm lathe chuck, spindle speed 4000 min-1, disc turret with VDI60 interface, number of tool places: 12, turning length (max.) 1000mm, revolving Ø over bed (max.) 720mm, revolving Ø over radial slide (max.) 550mm, dimensions: 4930x2790x2200mm without chip conveyor, weight: approx. 12000kg

Center height: 570 mm Center distance: 2000 mm Spindle bore: 62 mm Make VDF DUE 56 Type DUE 560 / 2000 Year 1984 LUZ drehmaschine Universal turning lathe vdf due Centre height (mm)Swing = 570 Center distance (mm) DBC = 2000 Spindle bore Bore = 62 Rohm 3 chuck 315 mm HeidenHain dro 3 Axis Multifix tool holder

Dividing head make SCHMIDT - KOSTA type AT / 2 AFabr. -No: 11 / 12.79 built in 1979Table diameter: 315 mmPitch: 15 °With- Three-jaw chuck RÖHM 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

turning diameter over bed: 280 mm turning diameter over slide rest: 155 mm turning diameter in the gap: 350 mm turning length: 800 mm turning speeds: 26 - 2000 U/min spindle bore: 24 mm connected load: 1,6 kW weight of the machine ca.: 0,7 t dimensions: 1,55 x 0,8 x 1,3 m Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 610 mm y-travel: 405 mm z-travel: 510 mm table surface area: 760 x 400 mm spindle taper: SK 40 spindle turning speed - stepless: 80 - 8000 U/min spindle drive: 7,5 kW max. torque on the spindle: max. 142 Nm feeds: 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical: 24 / 24 / 15 m/min distance table / vertical spindle: max. 600 mm table load: 350 kg no. of tools in magazin: 24 workpiece diameter at full load: 80 mm tool length - max.: 300 mm weight of tools max.: 6,8 kg control: ULTIMAX SSM total power requirement: 18 kVA weight of the machine ca.: 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Internal threading machine HÜLLER type UG8 Masch. No. 626 0376 Year of construction approx. 1970 Cutting capacity M 8 in steel M 9 in cast iron M 10 in brass projection 200 mm Table size 270 x 270 mm Spindle speed 700 ? 1000 - 1400 rpm 3 stages Motor power 0.3 kW Mains connection 380 volts, 50 Hz spindle speed via gearbox with three gear stages - Thread pitch via interchangeable wheels, machine equipped with interchangeable wheels for 0.5 / 0.7 / 1 / 1.25 mm pitch - quick-release chuck RÖHM 1 - 10 mm - el. Foot switch for triggering - manual head height adjustment via crank Space requirement L x W x H: 650 x 430 x 1200 mm Weight 190 kg good condition; used

Column drilling machine IXION type BS 30 Masch. No. 00120669 Year of construction approx. 1995 Drilling capacity 30 mm Adapter MK 3 - short quill Projection 260 mm Quoil stroke 120 mm Table size 500 x 350 mm Column diameter 110 mm Spindle speed Level 1 80 - 140 - 230 - 380 - 700 rpm Spindle speed level 2 160 - 280 - 460 - 760 - 1400 rpm. Motor power approx. 1.1 and 2.0 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 5 V-belt steps - Table height adjustment via hand crank - quick-release chuck RÖHM Supra 3 -16 mm Space requirement L x W x H 800 x 520 x 1880 mm Weight 230 kg very good condition; used

Column drilling machine IXION - MAXION type Unimax 3 Fabr. No. 201516 Year of manufacture 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 260 mm Pinol stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 volts, 50 Hz spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for right-hand and anti-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table Height adjustment via hand crank - Quick-action drill chuck RÖHM 1 - 16 mm - Emergency stop button Space requirements L x W x H 800 x 530 x 1800 mm Weight 230 kg very good condition; used

turning diameter over bed: 330 mm turning diameter over slide rest: 170 mm turning length: 800 mm centre height: 155 mm centre distance: 800 mm spindle bore: 38 mm spindle turning speed range: 24 - 2800 U/min spindle head: DIN 55022 Gr. 5 feeds - longitudinal: 0,026 - 1,253 mm/U feeds - cross: 0,013 - 0,628 mm/U dia. of leadscrew: 24 mm lead of leadscrew: 6 mm tailstock taper MT: 3 tailstock quill stroke: 110 mm total power requirement: 3 kW weight of the machine ca.: 800 kg dimensions of machine L x W x H: 1,80 x 0,70 x 1,23 m Accessories: 3-jaw chuck RÖHM 160 mmø, changing tool post PARAT, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrmaschine ATLAS COPCO LBB 36 H060-U 8421 0408 47 Speed: 6000 rpm operating pressure: 7.0 bar chuck: RÖHM SUPRA Ø 1 - 13 mm used, tested ! Dimensions (drill only): 240 x 170 x 50 mm

Key data: 160 mm, 460 mm, 4000 1/min

Control Bosch CC200 Turning diameter 160 mm Turning length 460 mm Speed 4000 1/min 12-fold revolver with 6 antr. Tools Spindle passage 70 mm Tailstock Conveyor 3-jaw chuck Röhm Accessories

Angle drilling machine, extra-low voltage tool FEIN ASZX 55-1 0,15 KW 320 rpm 42 V 1AC 50 Hz 42 V DC drill diameter: max. Ø 15 mm Tool holder: MK 1 chuck: RÖHM Supra 0 - 13 mm used, tested ! Dimensions ( without cable ): 430 x 210 x 170 mm

Angle drilling machine, extra-low voltage tool FEIN ASZX 55-2 0,15 KW 320 rpm 42 V 1AC 50 Hz 42 V DC drill diameter: max. Ø 15 mm Tool holder: MK 1 chuck: RÖHM Supra 0 - 3/8 inch ( 0 - 10 mm ) used, tested ! Dimensions ( without cable ): 430 x 120 x 170 mm

Key data: 200 mm

CNC lathe Weiler Commodor B (Made in Germany) Lace lathe Manufacturer: Weiler Type: Commodor B Year of construction: 1997 El. Connected load: 4kW Weight: 1,500 kg WZ-Revolver: 4-fold WZ-Revolver Parat Trauwein RD2 Accessories: Div. 3-jaw chuck "Röhm Duro 200 KK6 UB" Various tool holders (without tools)

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Mondiale, lead and feed spindle lathe type Celtic 20 -Turning length: 1200 mm -Swivel Ø over bed: 440 mm -Swivel Ø without bed: 640 mm -Rotating Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Mondiale, lead and feed spindle lathe type Celtic 20 -Turning length: 1700 mm -Swivel Ø over bed: 520 mm -Rotating Ø without bed: 760 mm -Rotating Ø over support: 286 mm -Spindle bore: Ø 60 mm -Spindle speeds: 12 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 2990/1000/H1270 mm -Weight: 1667 kg

HAMLET COMMODOR incl. Three-axis digital display Turning length max. 1000mm Turning diameter max. 380mm Turning diameter over support 190mm Rod passage 56mm Speed range 25-2000 rpm Automatic longitudinal/face feeds Eeipidd Thread/Metric/Inch/etc Drive power 4 KW Tailstock MK4 Three-jaw chuck - Röhm 200mm Quick-change bracket incl. 3 inserts Bed stop Chip back wall Coolant system Feed protection 2 x EMERGENCY /OFF Machine Documentation Dimensions: LxWxH 2.7x1.5x1.8 meters Weight approx. 1.6 tons

Heavy lathe, lathe, lathe, lead and pull screw lathe, lead and pull screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead and pull spindle lathe type V3 -Turning length: 1800 mm -Swivel Ø over bed: 530 mm -Turning Ø over support: 330 mm -Spindle bore: Ø 62 mm -Spindle speeds: 14 - 710 rpm see photo -Three-jaw chuck: Röhm Ø 315 mm -Tailstock mount: MK5 -Accessories: tool holder/tools see photos -Dimensions: 1100/3460/H1250 mm -Weight: 2650kg

From insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Infinitely variable speeds per potentiometer 80-2010rpm automatic feed 0.1--0.2--0.3 Digital speed display Coolant pump Tapping function with foot switch Work light Pinol stroke 150mm Projection 300mm Recording MK 4 Drill chuck Röhm Supra 3-16mm Table clamping surface 330x320mm Height of machine 1930mm Weight approx. 350kg 3KW Power 380 volts

: gebraucht : 1685 : prompt, Zwischenverkauf v : Schweden : 6400 € : 1 : 400 mm : 1500 mm : 195 mm : 52 mm : 270 mm : 12 : 30 - 1300 1/min : 3,3 / 4 kW : 2600 mm : 800 mm : 1300 mm : 1100 kg 4-jaw chuck Röhm Dm. 200 mm quick change toolpost with 3 holder live centre does not comply with German UVV and Austrian AMVO no operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 650 mm, 25 1/min

well-preserved, used NEF 400 Siemens Sinumerik 840 D control system Year of construction 2007 Switch-on hours 16000 h incl. 3-jaw wedge bar chuck Röhm Spindle bore 79 mm Turret 8 positions Rapid traverse X-axis 20 m/min Rapid traverse Z-axis 24 m/min Drive power - spindle motor 11.5 kW Tailstock displacement 550 mm Pick-up cone in the tailstock quill MK4 Quill diameter 80 mm

Description: Consisting of a three-jaw chuck, manufacturer RÖHM (diameter: 200 mm) and two three-jaw chucks, manufacturer SCHUNK (diameter: 160 mm, 160 mm) Also various bases for jaw chucks weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 700 x 560 x 150 mm

Center height: 500 mm Center distance: 2000 mm Spindle bore: 130 mm CNC Brand: Heidenhain C-Axis with 360 Positions Live driven tooling Hydraulic tailstock Manuel plus contgrol 3 chuck ROHM Chip conveyor Swing over bed Ø:        1250mm Swing over cross slide Ø:850mm Spindle bore:            130mm Spindle power:           46kW Bed width:               750mm Tailstock spindle Ø:     160Ø Stroke pinole:           315mm Spindle taper:           6Mk Speeds / ranges:         710Rpm Length:                  6800mm Width:                   3300mm Height:   ...

turning diameter over bed:530 mm turning diameter over slide rest:320 mm turning length:2000 mm center height over bed:275 mm speeds:18 - 1600 U/min spindle bore:60 mm bed width:430 mm engine output:17 kW weight:2700 kg spindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

with 3-jaw lining Röhm - 200 mm - 15 pitch

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Lathe Vertical Type double column KOLOMNA model 1580 L Year of manufacture 1978 Very good condition, Machine dismantled New electrics can be put as for the customer request Location: Rudniki, Poland, Technical details : Max workpiece diameter : 8000 mm Max workpiece high : 3200 mm Max workpiece weight : 125 000 kg Facing chuck diameter : 7100 mm Max ram stroke : 2000 mm Max carriages travel : 4275 mm Table speeds range : 0,22-20,1 rpm Carriages feed range : 0,0352-285 mm/min Carriages rapid feed : 2500 mm/min Transversal beam feed : 300 mm/min Dimensions : 8615x17600x9800 mm Machine weight with electrical unit : 258 000 kg Machine weight without electrical unit : 247 300 kg

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS

Heavy duty centre lathe KRAMATORSK model 1A670 Manufacturer: KRAMATORSK Condition: good, complete Machine is just dirty, we will clean it, and paint it. Technical details: Tail stock taper 120mm diameter of hole in the spindle 80mm diameter of spindle's taper 120mm chuck diameter is 2000mm bed width is 2240mm Swing over bed 2000 mm Swing over carriage 1600 mm Max distance between centres 10 000 mm Centers hight 1060 mm Max workpiece weight 63 000 kg Spindle hole 80 mm Spindle cone (1:7) 120 mm Tail stock cone (1:7) 120 mm Spindle speeds range ( stepless ) 1-125 rpm Carriage feeding longitudinal 0.19 - 32 mm/rev Carriage feeding transversal 0.076 - 12.8 mm/rev Carriage rapid feeding 3100 mm/min Threading metric 2-96 mm, inch 12-3/8 tpi Main motor power 100 kW Installed power 112.5 kW Dimensions 17720x3840x2850 mm Machine weight 105 000 kg

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 320mm 3 Knife shaft reversible knife (no more adjustment) Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation WJ-500200 SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Planing knife 320 HSS G&WJ-BA-410-HSS

Steel bracket Multifix Three-jaw Chuck Technical data: Spindle height 175 mm Centre distance 800 mm spindle bore 40 54 mm speed 1500 rpm Recording: Camlock 6

Accessories: three-jaw Chuck Faceplate Bezel div. holder Collet chucks Quick Collet holder Technical data: Tip height 200 mm Top width 1500 mm 24 Speed 1500 rpm

NEW MACHINE With Formatschiebetisch 2, 60m Saw blade 250-315 mm Swivel: 90 °-45 ° Planing width 410 mm 4 cutter Blade (no setting more) Dressing table length of 1800 mm Clearance height of 4-225 mm Milling cutter: 90 °-45 ° swivel to the rear Blower rpm: 3000/4000/5000/6000 / 8000 and 10000 RPM Vertical lift 160 mm Engine power: 3 engines 3 KW400 V (4,0 PS) S1 100% continuous operation WJ-500300 Special price: NET Options: Before scoring unit with motor Guide fence 900 mm Integral safety rail 500 mm Westcott Chuck 0-16mm Milling Eccentric clamp Right - and left-hand rotation (BUR) Engine 4.0 KW (5.5 HP) S1 100% Planer blade 410 HSS G & WJ-BA-410-HSS

Accessories: -Three-jaw Chuck -Steel holder multi fix A -Lamp -Coolant Technical data: Tip height 120 mm Top width 450 mm Spindle passage 23 mm Spindle inner taper MK 4 Plan travel 150 mm Tailstock MK 2 Quill way 80 mm Manual 9 levels Speed range 2 travel of bolt turn 30 3000 rpm

-Three-jaw Chuck -2 Steel holder Multifix -Coolant -Lamp Technical data: Tip height 180 mm Top width 1000 mm

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds:  ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact sensors / reference switches / limit switches on all axes Double secured emergency trigger energy chains for clean cable flush Total mass with motors : LxWxH approx. 3070 x 1800 x 1420 mm Fraes ...

-Röhm three jaw Chuck ø 160 mm -Steel holder multi fix A -div. collets -Fixed bezel -Revolving bezel -Chuck -Nivelierelemente Technical data: Tip height 140 mm Top width 500 mm Spindle bore 38 mm Spindle speeds 15-3550 RPM. Machine weight approx. 750 kg

Drilling capacity: 40 mm tool holder: MK 4 speed (spindle): 90-1455 K rpm projection: 320 mm drilling table swivel: +/-50° distance spindle to table maximum: 590 mm distance spindle to base plate: 1155 mm column diameter: 120 mm table size: 505 x 425 mm worktop base plate: 360 x 370 mm motor power: 1.0 / 1.5 kW machine dimensions (W x D x H): 500 x 930 x 1870 mm weight approx.: 450 kg Accessories: - Chuck Dorn MK 4 / B 18 - coolant system - digital speed display - keyless drill Chuck 1-16 mm / B 18 - reduction sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - halogen lamp - automatic tool ejector - protective cover

CARVING machine type MARIANI PL 8 second hand machine working conditions : good with Frequency Converter HF rotary device for the simultaneous rotation of the model and the pieces manual chuck of mandrins unit also to work with flat pieces Technical Details : n.8 spindles distance betwen spindles mm. 420 n.02 rotation speed of spindles rpm 9.000 / 12.000 max. working length ( on rotation ) mm. 1900 volt. 380/50 net weigth kgs. 2500 overall dimension mm. 5000 x 2800 H=mm.1500 ( machine assembled ) Volt. 380/50

Description Steel holder Multifix type: B Plexiglass Chuck guard Three-jaw Chuck ø 200 mm Live Technical data: Tip height 160 mm Top width 800 mm Spindle bore 36 mm Speeds 24-2800 RPM Recording bayonet 5 (DIN 55022)

Swing: 530mm. Swing over carriage: 320mm. Distance between centers: 2000mm. Spindle: 60mm. Equipped with chuck. Equipped with DRO Fagor. Motor power: 10cv.