chp plant used for sale

Complete LVL Plant Don't hesitate to keep in touch with us for further information.

Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.

An Alpma soft cheese production plant for Camenbert, Bri and feta cheese For milk processing of 10,000 l per hour, the following are available: Moulds Battery for round and square soft cheese moulds 4 Cheese Trays Stacking Turning Machines Transport equipment for tray stacks Dry salt plant Block moulds, washing system and stacker and destacker for the block moulds over 15,ooo pieces of trays for round and square soft cheeses Open washing trays for trays and equipment of a soft cheese dairy If there are no cheese vats, then you can use the open, approx. 15 m long cheese tub with a continuous curd production (coagulator tub). with S 5 control and the coagulator strap will probably have to be replaced.

Packaging plant Technical data • Conveyor belts: 4 • Conveyor belts Length (mm): 2570 • Conveyor belts width (mm): 900 • Ewnopack WSU 2200 cutting machine: built in 1995 • Cutting machine cutting length (mm): 1400 • Strapping device Signode HB 4300: built in 2002 • Strap Signode HB 4300 for: 9 / 10.5 mm plastic tape • Pass-through size strapping device max. (mm): width = 800; Height = 780 • Components all: fully automatic chained

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers Ready to be dismantled

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Distillation plant for WFI water or pure steam generation Manufacturer: DEWA Type DP 30 EVS Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

equipped with magnetic separator Including radio control Auction-ID: A1-48031-15

COMPLETE GRANULATION LINE Products: glass, clay, fertilizers; Working system; Productivity: 15,000 tons/year in 2 work shifts with 2 workers per shift; CE marked; Main components: • D1 - Raw material loading hopper for storage of raw material loaded by wheel loader – 15 ton/h; • P1 - Disruptor/Crusher - Crushes any aggregates of various sizes present in the raw material arriving from D1 – 15 tons/h; • R1 - R24 Granulator Mixer - mixes and granulates the raw material from P1 and discharges the wet product into the hopper – 8 ton/h; Main components: • B1B Fluid bed dryer - Dries wet granules from R1 - 8 ton/h; • T5 - Vibrated tubular duct with loading ports - Transport of dried granules and fine powder respectively from B1B the dust discharge rotocell from the PD4 filter to the P5 vibrating screen; • P5-Vibrating Screen - Selects the dried ...

Auction-ID: A1-41278-530

Matériel dédié à la plantation de sapin de Noël Auction-ID: A3-46198-36983

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

Power: 3 kW Auction-ID: A7-48614-23

Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL

1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h

Technical details Manufacturer: Friedli Type: Complete pelletizing plant Contract number: 714169 Fabrication number: F3148 Configuration: - Gruber hammer mill - Screw conveyor to conditioner - Stainless steel material conditioner - Starch dosing hopper with screw feeder - Stainless steel intermediate silo (500 l) - Aeration system - SC 200 S dosing screw (Ø200 mm) - Variable-speed 1.5 kW dosing motor - La Meccanica CLM 304 LC pellet press - Ring die system with forced feed - 45 kW press motor - V-belt drive with slip monitoring - 2 new press rollers + 1 reground set - 1 new die + 1 reground die (Ø304 mm, 6 mm holes) - Automatic lubrication system - Cooling screen with dust extraction - Fan and cyclone with rotary valve - Scraper conveyor - Pellet storage silo - Automatic bagging machine (1.5–25 kg) - Flintec weighing system - Bag sealing machine - Klockne ...

A complete and fully automated tank storage and mixing system for the production of non-alcoholic, non-explosive liquids is available. Stainless steel tanks: 2, tank volume: 5m³, total volume: 10m³. Equipment: load cells, dosing pump, agitators, control system and level sensors. The system has seen very little operation and is therefore in an almost like-new condition. Documentation available. An on-site inspection is possible.

Kemper Becherwerk for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft dough space-saving design optionally 1 or 2 pieces of dough Crossband left-hand run / crossband right-hand-running

TECHNICAL DATA: Autoclave dimensions mm: 350 x 2000 Autoclave volume lt: 175 Installed electrical power KW: 55

Pre-breaker with crusher Suitable for soft lime, marl, coal Power up to 200- 600 t/h Task size up to 1500mm Drive - electric transformer station 30kV/400V Drive power approx. 500 kVA Plant weight approx. 130 tons Task bunker 25m3 Chain conveyor Roller rust Schlagwalzenbecher Deduction tape Dust removal system Caterpillar suspension - not self-driving Conveyor belt 3 x 40m Telestack, self-driving, belt width 1200mm Immediately available

VELO flotation system PRI 100 for clarifying grape musts Capacity: 20.000l/h UNI-DEPP-KAR Manufacturer: VELO S.p.A. Type: PRI 100 Year of construction: 1998 Fabr.No. V6226 Capacity: 20.000l/h mobile with compressed air generator Measurements: Height: 2180 mm Length: 1500 mm Width: 1220 mm All the equipment s. photos

Big Bag filling station, filling and weighing system used The system consists of the following components: 1 filling hopper approx. 2300 height 2500 mm 2 stainless steel trough screws 1 tumbling/shaking sieve approx. 1200 height 1900 mm 1 BigBag filling station approx. 1950 x 2400 x 3700 mm 1 control cabinet The Big Pack filling is filled by wheel loader or forklift via a pouring funnel. The filling material is transported via a conveyor screw to a tumbling sieve. From there, transported with another screw to the actual weighing and filling station. The big bags lie on a vibrating floor when filling and are thus compacted.

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

Double pipe heat exchanger pipe heat transfer for biogas plant, sewage treatment plant sludge hygienization - used - Manufacturer AEL GmbH Leisnig Type Double pipe heat transfer W202 Fabr. No. 7.0637.940/29-56 Built in 1997 Permissible betieb pressure 6 bar Permissible operating temperature 90°C Content 1090 l Kerb weight 6510 kg Length approx. 11 m Width approx. 3 m Depth approx. 1.5 m

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + Model "S", suitable for small dough pieces (approx. 100 - 350 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 100 - 350 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105  ...

New machine Stainless steel model 24-month warranty Properties: + TOP value for money + Solid cone round wire in stainless steel version + with control panel and automatic flour spreader + suitable for medium-sized dough pieces (approx. 300 - 1,100 gr) + optimally suited for wheat dough up to a TA of approx. 170 (depending on the dough) + extra long rounding/running distance of 6 meters for best round ingestion properties + gutters and cones are teflon-coated + Base is mobile and also available in stainless steel + mounted on robust rollers with fixed SPECIAL equipment (not retrofittable!): - Blower / ventilation of the gutters and cone (recommended for dough with TA > 155): + EUR 1,745,-- Technical data: Weight range: 300 - 1100 grams (dough/product dependent) Hourly output: approx. 1,800 pieces (dough/product dependent) Orbit: 6 meters Dimensions: 105 x 105 x ...

Fat baking device Esback Köhler 661 101 -Fat baking device with fermentation cabinet -with 1 tipping plank trolley and 10 tipping boards -optional with 2 tipping plank trolleys and 20 tipping boards -380 Volt 50Hz -Fat tubs inner mass: 72x63cm

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Hull engine in replacement Scania DC13-071A without turbo,EGR cooler+hoses,PDE's,controlr installed in Kleemann crushing plants. Price only on request

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel

According to description pdf attached complete line for profiles + WPC profiles

-Fat baking device from Esback -with fermentation cabinet -with tipping plank trolley incl. 10 tipping boards -with 2 screen carriers incl. manual turn -380 volts

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

TETRA PAK A3 COMPACT FLEX 250ML AND 200ML PRISMA FILLING LINE Item #: Usm-131 Category Tetra Pak A3 CF/Flex A3 Compact Flex 200ml and 250ml Prisma Filling Line with quick Change kit. Year of manufacturing for the full line is 2016 and few working hours, just like new 1-A3 Compact Flex 200ml and 250ml Prisma Filling machine, Speed 9000 Packs per hour 2-Date Printer 3-Helix Accumulator 30 meter 4-Straw applicator TSA 30 5-Shrink 30 6-Conveyors and Paper Trolly

Brand new wooden powder trays for mogul plants, quality, long-life cycle, material, precision analog to Treiber, stackable, appropriate for all mogul lines, tested for NID, W&D, MAKAT, BOSCH, partially already certified by the manufacturers of the line send your price inquiries to company SCHOKOMA GMBH indicating quantity of trays, bottom material, dimensions inside and outside, delivery possible

We sell a baguette system of the company JAC type BA 402 incl. baguette long scooter. Used and refurbished.

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

turning diameter over bed: 920 mm turning diameter over slide rest: 600 mm turning length: 12000 mm loading capacität: 20 tons turning speed range: 3,6 - 172 U/min volt: 380 V total power requirement: 90 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.