chp plant used for sale

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - / Contact us at -

Manufacturer: COMUNA-Metall Year of Manufacture: 2008 Gas type: Category 12HL Connection pressure: 20-50 mbar Nominal power range: 150/195 kW Voltage: 230/400V, 3-phase, 50Hz Fuse: NH 00, 100A Permissible operating pressure: 6 bar Thermal power: 100 kW Electrical power: 50 kW Protection class: IP 54 Permissible operating temperature: 90/70°C Find more here - / Contact us at -

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Key data: 1600 KW, 400 V

CHP Power Plant 800 kWe with 2 × MWM TCG 2016V08 Gas Gensets Combined Heat and Power (CHP) plant with 800 kWe / 400 V / 50 Hz output, designed to operate on natural gas or biogas. The plant was originally delivered by MWM in 2011 and remained in operation until 2021. It has low operating hours and is in good technical condition. Thermal energy is recovered as hot water at 90°C, currently utilized for district heating. Due to limited biogas availability, the plant typically ran at 30–40% load and not in continuous 24/7 operation. The facility includes a complete gas treatment and mixing system to handle landfill gas with a methane content of 40–55% CH₄. The power generators are housed in two soundproof containers, while the TEAM Evo MWM power plant control system, electrical switchgear, and control cabinets are installed in a separate control room. The heat recovery syste ...

Key data: 2400 KW, 400 V

CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...

Key data: 800 KW, 400 V

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

2 identical water-to-water heat pumps. Manufacturer: Thermo-Tec Type: TT-CHP W/W 170.2-S Heating capacity: 207 kW Refrigerant: R290 - Propane Year: 2024 Can be operated with groundwater/well water or via geothermal probes. Heat pumps can only heat. Commissioning: September 2024 Decommissioning: May 2025 In the meantime, it has been professionally dismantled, stored and immediately available. Subject to prior sale - errors possible Internal reference number: E-1208

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace

- Max. nominal thickness 40 mm - Max. recommended thickness 20 mm - Max. bevel length in several runs 18 mm - Max. bevel length in single run 12 mm - MIn. bevel inner diameter 100 mm   - X Bevel - K Bevel - V Bevel - Y Bevel - High average cutters lifespan around 1000 M - Self feed - Zero maintenace -  

General SKU213T152 MakeAlfa Laval LocationBarneveld CEcheck TypeCHPX510TGD-15CGRX Main Features MaterialStainless steel Capacity20000 Ltr./Hr. Motor18 KW Specified Features - Separator Separatorcheck Capacity20000 Ltr./h Suitable formax. 1100 kg/m3 Motor18 kW, 400 volt (Ex) Max. rotor speed6240 rpm Mounted on stainl. steel platecheck MaterialStainless steel Information No.4131842 Year of construction2005 Mounted on mild steel platecheck Floorspace1,5x0,8 m Total height1,8 m Weight1840 kg ATEX compatiblecheck Extra SpecificationsInside drum diameter: 438 mm Proces temp.: 0/100 °C. Seperator tooling in box Max 60 discharges of solids per hour, 6-8 ltr discharge volume. SeparatorsAlfa LavalCentrifuges > SeparatorsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A. Diameter of the impellor: 180 mm. Connections on the inlet: 70 mm. Connections on the outlet: 60 mm. Estimated capacity: ± 20.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A, Estimated capacity: ± 20 m3/h

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Qty. 1 Second-hand steel strip production plant Mfc.: NKK, SMS, Bricmont, Siemens, Woo Jin Inc., Kum Soo Ind., Yong Woon Heavy Ind., Affival, Chun Yang, Sumitomo Heavy Ind., Primetals, Toshiba, Sungmyung Eng., Kiheung, Hyundai Steel, Dosan, Kobe, Yaskaawa, IMS, ABB Built: 1995 – 2018 Production plant weight: approx. 50,000 T Slab dimensions: 55 mm x 900~1,560 mm x 20,000~43,000 mm - T x W x L Strip dimensions: 1.4~16 mm x 900~1,560 mm – Coil weight: 28 ton Scope of supply: EAF A EAF B Ladle Furnace Continuous Caster Soaking Pit Descaler Hot Rolling Mill Cooling Unit Coiler Skin Pass Mill Equalizer EAF A Built: 1995 – 2005 Stopped in 2011 EAF B Built: 1995 – 2005 Stopped in 2020 Caster & Rolling Mill Built: 1995 -2005 Stopped in 2020 Capacity (slab) 1.8 MT /annum (A & B combined) Slab dimensions: 55 x 900-1,560 x 20,000-43,000 mm T x W x L  ...

ECOLAB filler outdoor cleaning system, but can also be used as a satellite station. As good as new, ready for immediate use

Grease Environmentally friendly, quickly biodegradable lubricating greases based on calcium soap and rapeseed oil. Manufacturer: Fuchs Item No.: 600654726 Plantogel 2 N 180 kg NEW - orig. packaging

COMPLETE TETRA PAK UHT PLANT WITH TWO ASEPTIC FILLING LINES FOR SALE Item #: Usm-211 Category Tetra Pak TBA 19 1 Tetra Therm Aseptic Drink/ Als Tetra Pak South East (Pvt) ltd Liter 20,000 2 Tetra Alex Homogeniser Tetra Pak South East (Pvt) ltd LPH 10,000 3 Jumbo Reel Truck 080 Tetra Pak South East (Pvt) ltd 4 Juice Processing Equipments Tetra Pak South East (Pvt) ltd LPH 8,000 5 Tetra Pak TBA/8 1000S Filling Tetra Pak South East (Pvt) ltd LPH 6,500 6 Cap Applicator - 30 Flex Tetra Pak South East (Pvt) ltd PPH 9,000 7 Conveyor Control Lubri/Systems Tetra Pak South East (Pvt) ltd 8 Tetra Straw Applicator 21 Tetra Pak South East (Pvt) ltd PPH 9,000 9 Conveyors Tetra Pak South East (Pvt) ltd 10 SS Pipes and Fittings Tetra Pak South East (Pvt) ltd 11 Tetra Pak TBA/19 Filling Machine Tetra Pak South East (Pvt) ltd LPH 1,500 12 Tetra Pak Strainer  ...

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...

60T bis 80T per hour capable Find more here - /

Power plant (Lambion-Howden-Scheuch-Hamworthy) History - Commissioning: 2009 - Power plant built for the heat supply Manufacturer: Lambion Siemens (turbine, measurement and control technology) Imtech (electrics and performance data: 950 kW rated electrical power 2.00 MW rated thermal output HT(128 128°C) 1.50 MW thermal output NT (85 85°C) 6.74 MW thermal firing capacity Steam output: 7.5 t/h approx. 11,000 tonnes of fuel required per year LPM and WHS Boiler Manufacturer Lambion Year of construction 2008 Maximum steam production [t/h] 7.5 Max. permissible pressure [bar] 32 Max. permissible vapour temperature [ [°C] 440 Turbine / Generator manufacturer Howden Machine TWIN CA 34 Year of construction: 2008 Generator manufacturer: AvK Generator Generator type: DSG 74 M2 System data: Flue gas cleaning Manufacturer Scheuch Condenser / recooling manufa ...

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating el ...

For Sale: Complete 10 MW / 2 MW Cogeneration Power Plant Available for immediate acquisition: a fully integrated power plant for the combined and efficient production of heat and electricity through a cogeneration system. Technical Description: The whole installation (Model: E.V.A.) for sale includes components listed below: STEAM BOILER Manufacturer: Wehrle Werk Year: 1999, Heating capacity: up to 10 MW Fuel type: biomass/RDF Fuel gas volume: 20.000 Nm³/h Fuel consumption: approx. 2500 kg/h Fuel need: approx. 20 000 t/a Average combustion temperature: approx. 900°C Main steam pressure: water steam with 40 bar Main steam temperature: 410°C Main steam mass flow: 11 t/h Combustion power gross: max. 10.000 kW Combustion power gross: min. 7000 kW Water content: 25 m³ STEAM TURBINE Manufacturer: KKK / Siemens SST110 Electrical capacity: up to 2 MW Year: 1999, serial  ...

Concrete Mixing Plant 1: Manufacturer: ELBA- Model: Supermobil ESM 60 Year of Manufacture: 1998 Status: Decommissioned Technical Specifications: - Rated Output: Approx. 30 m³/h - Dosing Unit: - Loaded by wheel loader - Total capacity: 180 m³ - Four chambers: 4 × 45 m³ (25t each) - Binder Storage: - 3 vertical silos - Each silo approx. 66 m³ (80t) at a density of 1.2 t/m³ - Dosing System: - Aggregates: via weighbelt, 2500 kg - Binder: via container scale, 500 kg - Water: via container scale, 500 kg - Additives: - Two-chamber liquid additive scale, 2 × 12.5 liters, 25 kg total - Mixing Equipment: - 1 EMS 1000C single-shaft compulsory mixer - Concrete discharge: 1,000 liters - Discharge Height: - For truck mixer and truck loading: 4.00 m - Control System: - Fully automatic with computer - Operator container included - Electrical supply: 400 V, 50 Hz, 3-phase, 104 A fuse Concre ...

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

full line for mesh up to 6 m

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

Four nearly new moulds for garden wall and fence.

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

NANO FILTRATION & REVERSE OSMOSIS PLANT USED FOR WHEY CONCENTRATION FEED CAPACITY: 20.000 LITER PER HOUR OUTLET: 22 % SOLID RATIO ALFA LAVAL AND FRISTAM PUMPS VERY GOOD MECHANICAL CONDITION YOM: 2002

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

ULTRAFILTRATION PLANT CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, LABNE CHEESE, FRESH CHEESE, CREAM CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE ...ETC PRODUCTIONS FULLY AUTOMATION CONTROLLED WITH HMI

NANO FILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

We can offer 2 complete BCF spimming lines, eachline has 6 positions, manufactured by Plantex, Italy in 1996, can produce PP, PA yarn, 1~3 color, 1000~4000d, working condition. Seriou buyers contact us.

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent