chipper used for sale

Catalog No. 6825 TECHNICAL DATA - dimension of the loading hopper length/width 900x630mm - working width of the rotor 540mm - 7.5 kW motor - sieve diameter 20mm - knife size 40x40mm - number of knives 15 pcs - autoreverse - pressure drawer - dimensions length/width/height 2060x980x1580mm - weight 1008 kg ADVANTAGES – German production – unpainted - very good condition – used chipper Net price: PLN 37900 Net price: 8151 EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Technical data:- Funnel opening 1030 x 1235 mm- Funnel volume 1.5 m3- Power depending on material and screen size- Motor 30 KW- rotor diameter 360 mm- rotor length 1030 mm- Rotor speed 70 - 90 rpm 50 checker knife 30 x 30 mm - PLC control cabinet (completely wired) incl. 5 m cable-siebloung 8 - 40 mm after optional suction nozzle diameter 200 mm- slider with pressure beam- vibration-absorbing machine feet- Automatic star triangle start-up- automatic Off when idle- clock control to avoid unnecessary idle time- CE-Conform dimensions LxWxH 2455 x 1970 x 1730 mm- Weight 2600 kg

Technische Daten: - Trichteröffnung 510 x 810 mm - Trichterform gerade - Trichtervolumen 0,4 m3 - Leistung je nach Material und Siebgröße - Motor 15,0 KW - Spannung 400 V / 50 Hz - Rotordurchmesser 260 mm - Rotorlänge 510 mm - Schneidsystem 12 Karo-Konkav Messer 30x30 mm - Rotordrehzahl 70 - 90 Upm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl (Standard 15/20 mm) - Absaugstutzen Durchmesser 160 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - leistungssteigernde Schrittwerksteuerung für Hydraulikschieber - CE-Konform - Abmessungen LxBxH 1750 x 1100 x 1640 mm - Gewicht 1000 kg

Technische Daten: - Trichteröffnung 1230 x 1235 mm - Trichtervolumen 2,0 m3 - Leistung je nach Material und Siebgröße - Motor 37 KW - Rotordurchmesser 360 mm - Rotorlänge 1230 mm - Rotordrehzahl 70 - 90 Upm - 60 Karo-Messer 30 x 30 mm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl - Absaugstutzen Durchmesser 200 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - CE-Konform - Abmessungen LxBxH 2455 x 2168 x 1730 mm - Gewicht 3200 kg

Technische Daten: - Trichteröffnung 1530 x 1535 mm - Trichtervolumen 3,0 m3 - Leistung je nach Material und Siebgröße - Motor 55 KW - Rotordurchmesser 360 mm - Rotorlänge 1530 mm - Rotordrehzahl 70 - 90 Upm - 76 Karo-Messer 30 x 30 mm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl - Absaugstutzen Durchmesser 250 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - CE-Konform - Abmessungen LxBxH 2765 x 2520 x 1730 mm - Gewicht 3600 kg

Technische Daten: - Trichteröffnung 630 x 800 mm - Trichtervolumen 0,6 m3 - Leistung je nach Material und Siebgröße - Motor 18,5 KW - Rotordurchmesser 260 mm - Rotorlänge 630 mm - Rotordrehzahl 70 - 90 Upm - 30 Karo-Messer 30 x 30 mm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl - Absaugstutzen Durchmesser 160 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - CE-Konform - Abmessungen LxBxH 1737 x 1167 x 1650 mm - Gewicht 1300 kg

Technische Daten: - Trichteröffnung 830 x 995 mm - Trichtervolumen 0,9 m3 - Leistung je nach Material und Siebgröße - Motor 22 KW - Rotordurchmesser 260 mm - Rotorlänge 830 mm - Rotordrehzahl 70 - 90 Upm - 40 Karo-Messer 30 x 30 mm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl - Absaugstutzen Durchmesser 200 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - CE-Konform - Abmessungen LxBxH 2285 x 1420 x 1730 mm - Gewicht 1600 kg

Technische Daten: - Trichteröffnung 830 x 1145 mm - Trichtervolumen 1,0 m3 - Leistung je nach Material und Siebgröße - Motor 22 KW - Rotordurchmesser 360 mm - Rotorlänge 830 mm - Rotordrehzahl 70 - 90 Upm - 40 Karo-Messer 30 x 30 mm - SPS Steuerung - Schaltschrank (komplett verkabelt) inkl. 5 m Kabel - Sieblochung 8 - 40 mm nach Wahl - Absaugstutzen Durchmesser 200 mm - Schieber mit Andruckbalken - schwingungsdämpfende Maschinenfüße - Automatischer Sterndreieck-Anlauf - Automatik Aus bei Leerlauf - Taktsteuerung zur Vermeidung unnötiger Leerlaufzeiten - CE-Konform - Abmessungen LxBxH 2285 x 1420 x 1730 mm - Gewicht 1600 kg

Disc chipper, inlet width = 340x380 mm disc chipper, infeed dimensions = 340x380 mm

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

SCHUKO ZM 900-2 chipper for wood chips for pellets and briquettes – German production – year of production 2002 TECHNICAL PARAMETERS: filling dimension 600 x 800 mm rotor diameter 200 mm rotor width 700 mm total power 18.5 kW number of knives 26 20 mm sieve autoreverse hydraulic drawer height 170 mm spigot diameter 200 mm dimensions (length/width/height) 200 / 130 / 170 cm weight 1200 kg

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Jensen A 3.3-245 Z, three-point attachment for PTO drive 540 rpm, 2-knife chopping disc, 2-roller feeder for wood up to 16 cm (feed opening max. approx. 160 x 245 mm) with adjustable feed speed, control pre-stop reverse, own closed hydraulic system, rear lights according to StVZO, toolbox below the feeder funnel. Weight approx. 700 kg. Well-preserved machine with age-related wear and signs of use, paint defects, rust, operational. Markenfabrikat made in Germany" (Jensen - since 1884). More wood chippers - also motor machines in stock!

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

Drum crusher with hydraulic pusher Knife drum width: 800 mm Mouth 800 x 1200 mm Motor: 18,5 kW extraction connection diameter 200 mm

Description: SPECIFICATIONS Opening blade cage length: 1,200 mm Opening blade cage width: 600 mm Sieve: ø20 mm Power: 55 kW Speed: 1,400 rpm Approx. Onsite Dimension. (l x w x h): 3,000 x 2,800 x 2,400 mm, weight approx.: 8,000 kg

Description: 7hp 212cc electric start 4 inch shredding capacity dual v-belt drive blade length 150 mm twin blade drum system building kit Approx. Onsite Dimension. (l x w x h): 880 x 565 x 830 mm, weight approx.: 88 kg

Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Laiotz A500/250 chipper - Italian production - autoreverse - Additional Top Roller TECHNICAL PARAMETERS: - material width max 500 mm - material height max 250 mm - engine power 90 kW - two knives - sieve 60x60 mm - rotor diameter 750 mm - rotor length 670 mm - three upper pulling rollers - three lower pulling rollers - conveyor belt 8000 mm - autoreverse - hydraulic shaft lifting - total power 100 kW Transport dimensions - 1200x200x170 cm - weight 7 t

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

Hello, I will sell a powerful chipper of the German brand Willibald SR 5000 The engine of the reputable company MAN - 460 hp. These engines are distinguished by cheaper operation compared to concretions Year 1998 The chipper is in almost perfect condition for its age. The chipper is very well maintained in technical terms, I add a lot of expensive parts to the machine as well as all the documentation to facilitate the service of the chipper. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. Very easy access to the engine and other components thanks to the lifted hatch. The same applies to the operation, which is highly intuitive. A chipper for a very diverse demand: - Various types of wood waste - Carps, Carps - Zrzyny - Pallets - blocks, waste - hay, straw (after changing knives) - and many others Efficiency  ...

Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...

Brodpol pallet board production line We present a complete line for the production of pallet boards from the Polish manufacturer BRODPOL A line of fully automatic disc sawmills installed and perfected for production. The rope is installed higher, while the entire conveyor belt infrastructure transfers the material between the individual operations, and the waste goes to the chipper. The line consists of Cross feeder with cascade for feeding round wood 4 m Longitudinal feeder before fitting Brodpol TT 5/600/400G fitting. Installed power 166.1kw 3.1. The flis falls into the transport towards the chipper 3.2. The side planks fall on the cross conveyors and are transferred to the off-cutting machine 3.3. The pile is transferred to the centering table in front of the multi-rip saw. 4.WP-165 Double Spindle Multi Rip Saw Installed Mac 132.2kw Cross conveyors dump ...

HewSaw SL250 Trio sawing line from year 2005 consists of log positioning devices, conveyors and three sawing machines. HewSaw sawing line is designed to process logs ranging from 100 mm – 420 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 6.2 m. Feeding speed of the sawing line can be adjusted from 50 m/min to 150 m/min. - Top diameter: 100–420 mm - Maximum log diameter: 550 mm - Cant height in Chipper Canter: 75–410 mm - Cant width in Chipper Canter: 75–410 mm - Cant height in Rip Saw: 63–310 mm - Cant width in Rip Saw: 75–410 mm - Saw kerf: 4.2–5.0 mm B2d2yohbnx - Chip length: 20–30 mm Sawline: 1.Measuring conveyor 2.Log positioner 3.Chipper canter 4.Cant scanning conveyor 5.Cant saw 6.Separating conveyor EK2 7.Cant turner 8.Infeed conveyor 9.Rip saw waste handling conveyors electric and control system hydraulic system

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

1 Gebr. Göckel knife sharpening machine G40el for chipper knives, chipper knives and planing knives with magnet 1300 x 150 mm Grinding motor: 5.5 kW Coolant tank with pump Mounts for slip rings d = 200 mm and d = 175 mm 1 holder for diamond grinding cups d = 200 mm 4 different stop rulers Switchboard Space requirement: approx. 2500 x 1300 x 1300 mm

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

CATALOG NO. 7069 TECHNICAL DATA - inlet width 400mm - inlet height 150mm - shaft width 450mm - shaft diameter 550mm - number of knives 2 pcs - 3 toothed shafts pulling from the top and bottom, 2×2.2kW - electric autoreverse - reverse gear - belt feeder - feeder length 5100mm - feed belt width 400mm - main engine 30kW - chipper dimensions length/width/height 2600x1500x1530mm - total dimensions of the feeder length/width/height 5200x560x910mm - weight approximately 3000 kg – with belt feeder – electric autoreverse - reverse gear – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 84900 PLN Net price: 18867 EUR depending on the price 4.50 EUR Net price: 22342 USD depending on the price o ...

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm<CRLF>Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer mill ...

Anthon panel sizing saw, year of construction 2000/01 Type Porta composed of: Roller conveyor, Longitudinal saw, Chipper left/right, Angle transfer, Parcel pusher, Drawer arms, Pusher tracks, Transfer table, Cross saws, Chipper left, Angle transfer, Roller conveyor Grenzebach Plattenstapeanlage Year of construction 1990/91 composed of: Roller conveyor, scissor lift, storage device, stacking device, chain conveyor on lifting platform, scissor lift, pallet insertion device, tongs transfer swivel device, chain conveyor, weighing device Waste disposal plant Holtec Vibrating Conveyor DS 500 - 11m Gössling Flat Belt Conveyors with Carriers Diemer ASC 50-25 LP-S, belt conveyor DB-A, secondary shredder DNZ 100-100

ORDER NO. 7188 TECHNICAL DATA - inlet width 600mm - inlet height 250mm - shaft width 600mm - shaft diameter 300mm - number of knives 32pcs - knife size 40x40mm - sieve dimensions 10mm, 12mm - toothed pulling shaft from above - shaft motor about 1.1kW - Electric autorewers - outlet for shredded wood fi 200mm, fi 300mm vibrogutter WRR 600 - vibrogutter motor power 1.8kW - vibrogutter length 3050mm - vibrogutter width 550mm - main motor 30kW - chipper dimensions length/width/height 2000x1600x1100mm - total dimensions of the vibrogutter: length/width/height 3050x700x750mm - weight 2280kg – made in Germany – used chipper, very good condition Net price: 146900 PLN Ex Tax: 33386EUR Net price calculated according to the exchange rate of 4,4 PLN/EUR (in case of major fluctuations in the exchange rate, the price may change)

Hopper chipper Vecoplan VAZ 700 Yellow Shaft width 700 mm 9/7.5 kw two-speed motor Auto Reverse Hydraulic Drawer Feed inlet 800 x 500 mm Two sieves included Year of Build 2009 Machine weight: 930 kg Machine dimensions: 1900x1500x1900 h mm The chipper is suitable for hardwood and softwood

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

CATALOG NUMBER 6114 TECHNICAL DATA - 800x1000mm loading hopper inlet - rotor working width 800mm - pump motor 0.75kW - 15kW main engine - number of knives 21 pcs - dimensions of the knives 30x30mm - 0.8x10mm sieve - pressure drawer - electric reverse - 2 × 1.1kW discharge augers - dimensions length / width / height 2460x1800x2250mm - weight 1660 kg - German production - reverse - pressure drawer - unpainted - very good condition - used chipper Net price: 69 900 PLN Net price: 16,069 euros depending on the price, 4.35 euros (Prices may vary for greater fluctuations)

Catalog No. 6796 TECHNICAL DATA - inlet width 410mm - inlet height 150mm - shaft diameter 800mm - number of knives 3 pcs - knife length 410mm - from the bottom, 6 pulling shafts, toothed - 2 pulling rollers, toothed from above - reverse gear - autoreverse - length of the conveyor belt 3500mm - width of the conveyor belt 390mm - main engine 37kW - feed motor about 4kW - feeder drive motor about 3kW - dimensions of the machine length / width / height 3300x2300x1900mm - feeder dimension length/width/height 3600x800x1000mm - weight about 7500 kg ADVANTAGES – Polish production – with a feeder – technical documentation – used chipper, very good condition Net price: PLN 75900 Net price: EUR 16323 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOG NUMBER 6631 TECHNICAL DATA - 285x305mm loading hopper inlet - 7.35kW engine - number of knives 3pcs + 2 counter knives - knife size 300x75mm - sieve (2 types) 10mm, 8mm - diameter of the extraction nozzle 100mm - dimensions length / width / height 1070x900x1980mm - weight 613 kg ADVANTAGES - Swedish production - additional sieve - very good condition - used chipper Net price: PLN 22900 Net price: EUR 5089 Net price, calculated at the rate of 4.5 PLN / EUR (with greater fluctuations in the rate, the price may change)

Catalog number 6726 TECHNICAL DATA - 280x300mm loading hopper inlet - outlet for shredded wood fi 310mm - rotor working width 340mm - 22kW main engine - number of knives 6 pcs - dimensions length / width / height 1300x1150x1680mm - weight 720 kg ADVANTAGES - very good condition - used chipper Net price: PLN 19900 Net price: EUR 4422 Net price, calculated at the rate of 4.50 PLN / EUR (with greater fluctuations in the rate, the price may change)

ORDER NO. 7026 TECHNICAL SPECIFICATIONS - inlet width 740mm - inlet height 300mm - shaft width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2pcs - sieve dimensions 55x55mm - 4 toothed pulling shafts from the bottom - lower shaft motor 5,5kW - 3 toothed pulling shafts from above - upper shaft motor 5,5kW - belt feeder - feed belt length 4300mm - feed belt width 600mm - belt feed motor 2,2kW - main engine 90kW - reverse gear, - autorewers - overall dimensions of the machine length / width / height 4600x2350x1700mm - overall dimensions of the feeder length / width / height 4550x980x970mm - total weight about 11000kg – German production, – used chipper, very good condition Net price: 295900 PLN Net price: 66494 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Shredding plant / chipper / shredder for shredding wood waste - Waste wood waste - Pallets - Packaging material and waste of many kinds Make: VECOPLAN - MASCHINENBAU Type: VAZ 300/180 Silent and slow-running. Propulsion:132. Kw. Rotor width:1800.mm. Rotor diameter:420.mm.(solid steel.) Rotor speed:80-120 rpm Capacity: 1500-2000.kg/h.je by material and task. Tools-knives ( cutting crowns 80x80 mm ) Sieve: 30.mm. round hole reinforced design Hydraulic strainer and rear flap with lowerable counter knife Conveyor belt cut-out 1000.mm. Insertion: approx. 1800 x 3000.mm. Weight: approx. 18.500.Kg. Included: control cabinet system + hydraulic system + operating instructions + electrical circuit diagrams. Dealer price 34.500.00€ net ex location. The machine is in good general condition

ORDER NO. 6955 TECHNICAL SPECIFICATIONS - loading hopper inlet L x W 1070x710mm - outlet for shredded wood fi 200mm - rotor working width 700mm - main engine 18,5kW - pump motor 1,5kW - number of knives 21pcs - knife size 35x35mm - sieve 50mm - pressure drawer - electric autorewers - dimensions length / width / height 1700x1300x1640mm - weight 1780kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 67900 PLN Net price: 15089 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6926 TECHNICAL SPECIFICATIONS - loading hopper inlet 1200x1000mm - outlet for shredded wood + viper fi 200mm - rotor working width 980mm - main motor 30kW - pump motor 0,75kW - viper motor 0,55kW - number of knives 24pcs - knife size 30x30mm - sieve 10mm, 12mm - pressure drawer - electric autorewers - dimensions length / width / height 2470x2130x1720mm - weight about 3000kg ADVANTAGES C0fhenux8o – German production – autorewers – pressure drawer – viper – very good condition – used chipper Net price: 122900 PLN Net price: 27311EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

CATALOG NO. 6928 TECHNICAL SPECIFICATIONS - loading hopper inlet 1560x1300mm - rotor working width 1300mm - main engine 36kW - pump motor 2x3kW - number of knives 36pcs - knife size 40x40mm - sieve 30mm, 28mm - pressure drawer - electric autorewers - dimensions of the machine length / width / height 3400x2420x2820mm - control cabinet dimension L/W/H 1000x450x1900mm - dimensions of pumps length / width / height 800x700x850mm - weight about 5000kg ADVANTAGES – German production – for Weima WL 15 – autorewers – pressure drawer – hydraulic pressure drawer from above – improves machine efficiency – very good condition – used chipper Net price: 169900 PLN Net price: 37756EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Brewhouse 5/10 HL, professional brewing system, like new, built in mid-2020, as well as tanks, cooling, etc. We sell professional brewing system three-vessel brewhouse 5/10 HL, like new, manufacturer Labu, built in mid-2020, so far 53 brews, due to closure of operations MADE IN THE EU! Labu three-vessel brewhouse basic version 5/10 Hl, year of construction 2020, commissioning mid-2020, 53 brews so far, with chipper, electronic start timer, electronic liquid level indicator, automatic brewing ladle filling, integrated CIP cleaning, automatic dosing of the tail water, visualized remote monitoring, stainless steel platform, automatic shot feeder, storage container for shot feeder, pump, beer hoses and connections Price brewhouse EUR 85.000,00 excl. VAT Optionally, on-site training and subsequent supervision by a brewer can be offered. It is also possible to sell existing recip ...

Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - Year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg