british flag
Resale Logo

chiller used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information warehouse systems  Robering Lagersysteme GmbH & Co. KG  http://www.robering-regale.de 
banner logo
start page > keywords chiller > results
364 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125479940 103

CME BF - 01 for sale
CNC Bed Milling Machines


CNC bed milling machine CME BF - 01 07-01-001 shipping time: immediately number: 07-01-001 manufacturer: CME type: BF - 01 MACHINE data year: approx. 1998 L x W x H: CA. 3500 x 2500 x 2550 mm weight: 10000 kg Very  ...
used machine
 
CNC bed milling machine CME BF - 01 07-01-001 shipping time: immediately number: 07-01-001 manufacturer: CME type: BF - 01

MACHINE data year: approx. 1998 L x W x H: CA. 3500 x 2500 x 2550 mm weight: 10000 kg

Very good condition specifications control: HEIDENHAIN TNC 426 CB travel: X - axis: 1300 mm Y - axis: approx. 700 mm Z - axis: approx. 850 mm Tischaufspannï¬?äche: approx. 1400 x 1000 mm spindle: speed range: approx. 10-4000 RPM Werkzeugaufna HME: ISO 40 - DIN 2080 power: approx. 11 kW tool clamping: hydraulic feed & express ducts: feed range: approx. 1-15000 mm / min rapid traverse: approx. 15 m / min accessories â?¢ universal - HURON - angle milling head â?¢ coolant system â?¢ RS 232 - slicer instead â?¢ hardened machine table â?¢ central lubrication â?¢ spindle chiller â?¢ direct - measurement system HEIDENHAIN - glass scale â?¢ machine documentation â?¢ foot switch for clamping â?¢ Tiltable Control Panel â?¢ electronic Handwheel â?¢ work light

â?¢ Feet â?¢ semi protection - cab â?¢ emergency

Accessories on request price and other specifications on request
1998
Price  
    request
125203637 702

SOLLICH CONBAR for sale
Cereal Bar Line


Manufacturer: SollichType: CONBARYear of manufacture: 1993Condition: REFURBISHEDCapacity: depends on the candy bar size and weight (if you need to know the exact capacity, please send us the desired dimensions and weight ...
used machine
 
Manufacturer: Sollich
Type: CONBAR
Year of manufacture: 1993
Condition: REFURBISHED
Capacity: depends on the candy bar size and weight (if you need to know the exact capacity, please send us the desired dimensions and weight of a ber)
It is possible to adjust the width of a sheet to suit your capacity needs.
Currently it is set for 80 cm width and it is possible to set it from 40 to 80 cm.

Capacity calculation example:
Size of a ber: 130 mm length x 25 mm width x 12 mm thickness
Bar weight: between 18g and 22g, according to the type of cereals and other ingredients
Useful working width of the SOLLICH CONBAR line: 800 mm
You can get approximately 230 bars per min (30 rows)
230 bars x 20g = 4600g per min = 4,6kg per min = 276 kg/h

LINE CONSISTS OF:
1- Sollich product-sheet forming roller, first layer ( Nougat Layer ) type web
2- Sollich Type ZK double Cooling Drum, second layer ( Caramel Layer )  + Pressing Roller (Laminator)          
3- Sollich Cooler Type KS 820 , the table is cooled from underneath , the length of closed parts of cooler is 12 meter
4- OKA - Slicer & Splitter & Guillitone Knife
5- Sollich Enrober Type TS 1020, useful width 1000 mm , actual width 1020  mm , with built-in tempering .
It still in as is - condition; 45 days needed to refurbish and to build a new electric panel, add an inverter to regulate the speed .
6- Sollich Cooler , the table is cooled from underneath , upper side cooled by air , you need a water chiller to cool the table from underneath & to cool the air condenser , length of closed parts of cooler 14 meter.

Please note that in case you may need to produce Cereal Bars/MÜESLI-bars, there is no need for a second layer , only first layer you will use + pressing roller to adjust thickness & width, exactly .
Please note you still need a glycol chiller, which is n o t included in this offer! The chiller, which is installed underneath the cooling table is only for the cooler, n o t for the drums.
The circulation pump is included
The air drier is included
NEW Electric panel
With inverter to be easily control  the speed for each motor separately!
The belt for the cooler is n e w, you will seal it in when installing the line .
There is a photo cell with air valves to fix the belt in the middle, to keep the belt running right not going left or right; it is included & we will test it.
Each drum has an oiling station, helps to avoid sticking of the candy on the surface of the drum; we take out the old rubber & we replace by n e w one from same type, it is suitable for food and made from Silicone.
Please note you need a water chiller to cool the tempering; not included in this offer!
In < refurbishing >  the SELLER shall not change any main parts like gears, he shall clean, paint and change some bearings & change some dealings.

Remarks:  Attached some very preliminary SOLLICH CONBAR-Line machine pictures; proper & better machine-pictures shall only be available after the present REFURBISHING work shall have been completed; approximately during the second half of January 2016.; Very good, reonditioned
1993
450,000 €  
    request
125465520 821

BASYS PRINT 541 for sale
CTP Exposure equipment (Imagesetter)


Basysprint UV setter semi-automatic CTP system and separate water chiller - digital screen imaging with UV - exposure - wavelength approx. 360-450 nm - format 690-940 mm - Materialthickness 0.15-2.0 mm - dimension UV set ...
used machine
 
Basysprint UV setter semi-automatic CTP system and separate water chiller - digital screen imaging with UV - exposure - wavelength approx. 360-450 nm - format 690-940 mm - Materialthickness 0.15-2.0 mm - dimension UV setter W D 2,300 x 2,000 x H 1,710 mm - weight UV setter OSTEO. 2,000 kg - operating hours approx. 43.000 h - lamp operating hours approx. 650 h (of max. 2000 h)
2007
18,000 €  
    request
125203711 702

Barni Cake Production line


Line consists of:1. AERATOR Model: D200Power: 17kw Capacity: 600kg/hIncluding one Mixing Vat and one storage Vat, one rotor pump and one screw pump, one Continuous Aerator, one Chiller machine and one cleaning pump.Aerat ...
new machine
 
Line consists of:

1. AERATOR
Model: D200
Power: 17kw
Capacity: 600kg/h

Including one Mixing Vat and one storage Vat, one rotor pump and one screw pump, one Continuous Aerator, one Chiller machine and one cleaning pump.

Aerator can widely be used in castle cakes, sponge cakes, chiffon cakes, swiss roll cakes, \"doll-shaped\" cakes, waffle cakes, cotton candies and others.

2. \"Doll-shaped Cake\" Particular Facility
Model: DH-8100
Capacity: 4,5 tons/day
Heat source: liquid gas, natural gas
Use of air: air compressor (self-prepare)
Gas Consumption: 19 m3/h
Including one Host, one Lifting machine and one set moulds (60 pairs)

Features:
- running speed is settable and adjustable
- temperature is measurable and adjustable
- capacity of stuff and filling is settable and adjustable
- the equipment specially sets automatic ignition devices to make the operation cenveniently; set firealarm devices to make the whole production safe and reliable
- with cake mixing machine, cooling and sterilization assembly line, unscramble materials assembly line, packing machine

Production flow:
Mix --- Paste filling --- Stuff filling --- Baking --- Cooling and sterilization --- Automatically unscramble material --- Individual package --- Sub-package --- Pack-cases --- End product

3. Stainless Cooling Conveyor; New
new
595,000 €  
    request
125436664 107

BYSTRONIC bystar for sale


Bystronic Bystar 4025 12 meter 6kw Manufacture: Bystronic Type: Bystronic Bystar 4025 12 meter 6kw YOM 2007 Laser on Hours 30,540 Laser working hours 15,809 Sheet Size XYZ 4000mm x 2500 x 150 mm Thicknes ...
used machine
 
Bystronic Bystar 4025 12 meter 6kw
Manufacture: Bystronic Type: Bystronic Bystar 4025 12 meter 6kw
YOM 2007 Laser on Hours 30,540
Laser working hours 15,809
Sheet Size XYZ 4000mm x 2500 x 150 mm
Thickness of Cutting Material
Mild Steel - 25MM
Stainless Steel -25MM
Aluminium - 15MM
Power Output 6000 Watts
Cutting Heads 7.5” & 5”
Comes with Auto change tables, extractor and chiller.
Price: Machine Price Ex Works 200.000 euros
EX WORKS GERMANY
2007
Price  
  DE   request
124980813 101

MAZAK VTC 800/30SR for sale
Machining Center - Universal


x-travel:3.000 mmy-travel:800 mmz-travel:720 mmtable surface area:3500 x 820 mmtable load:2,5 tcontrol:MAZATROL MATRIX turning speeds:18.000 1/minTorque:168 Nmtaper ISO:SK 40 tool change unit:30 Pos.rapid traverse:50 m/m ...
used machine
 
x-travel:3.000 mm
y-travel:800 mm
z-travel:720 mm
table surface area:3500 x 820 mm
table load:2,5 t
control:MAZATROL MATRIX
turning speeds:18.000 1/min
Torque:168 Nm
taper ISO:SK 40
tool change unit:30 Pos.
rapid traverse:50 m/min
spindle:35 / 26 kW
total connected load:78 kVA
weight of the machine ca.:16,1 t
dimensions of the machine ca.:5,3 x 3,55 x 3,16 m

5-axis universal machining center, rigid table with surcace mounted NC-rotary table dia 500mm and B-axis (+-110°) in milling head, internal coolant device, chiller for spindle, Swarf Conveyer, el. handwheel, no 3D-touch probe, approx. 53.500h \"machine on\", approx. 15.000h \"spindle on\" (but 2nd spindle)
2009
Price  
    request
125421693 106

PRESS FOR ALUMINIUM MAICO for sale
Diecasting press


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second  ...

 
BRAND Maico
Tek MODEL 380 F
YEAR 1994
Press for aluminium

Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked

Chiller IECI PF/300 GAS

Proportional pressure flow;

The proportional opening and closing;

Second stage motorised;

With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from
8:30 19:00 13:00 and 14:00 hours at at
 
Price  
  IT   request
124980825 101

GROB G 550 for sale
Machining Center - Universal


x-travel:800 mmy-travel:1020 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 size of pallet:630 x 800 mmtable load capacity:800 kgtool taper:SK 40 turning speeds:16000 1/minmax. torque on the spindle:223 / 160 Nmtool chang ...
used machine
 
x-travel:800 mm
y-travel:1020 mm
z-travel:1020 mm
control:HEIDENHAIN iTNC 530
size of pallet:630 x 800 mm
table load capacity:800 kg
tool taper:SK 40
turning speeds:16000 1/min
max. torque on the spindle:223 / 160 Nm
tool change unit:50 Pos.
total power requirement:42 kVA
weight of the machine ca.:22 t
dimensions of the machine ca.: m

5-axis machine with controlled swivel-rotary table (A/B-axis), milling head horizontal, 2-palet changer incl. 2 palets, 630 x 630 mm, integrated coolant-system with coolant tempering, chipconveyor, chiller for spindle, B-axis and electrical cabinet, zero clamping system on rotary table, T-stots instead of grid pattern system, option KinematicOpt for optimal machine kinematic, tooling cleaner device, 3D touch probe M&H, airblast through spindle, flushgun, blow out nozzle, el. handwheel, remote diagnostics, approx. 20.000h \"machine on\", approx. 10.000h \"spindle on\"
2010
Price  
    request
125355100 708

ICS COOL ENERGY Magnus for sale
Cold water sets


The chiller series Magnus ICS cool energy offers a Kältelteistung of 200 kW 1,949 kW and a heating capacity of 287 kW - 1,995 kW. The Magnus turbo compressor works with magnetic components and has a digital control f ...
new machine
 
The chiller series Magnus ICS cool energy offers a Kältelteistung of 200 kW 1,949 kW and a heating capacity of 287 kW - 1,995 kW.

The Magnus turbo compressor works with magnetic components and has a digital control function for the rotors of the compressor. That makes the process cooling with the Magnus particularly innovative because each most efficient setting for your production determined and can be eigehalten.

All water chillers series are EU-standardised the together, ISO14001 and ISO 19001 spline: certified and produced according to these standards and tested.
new
Price  
    request
125504826 109

TRUMPF TRUMATIC L 4050 for sale


Technical Data item number: LM-1686 Manufacturer: TRUMPF Type: TRUMATIC L 4050 Year: 2004 Working area: 4000 x 2000 x 115 mm Laser rated output: 6000 Watt Control: Basis Sinumerik 840 D Working hour: 502 ...
used machine
 

Technical Data

item number: LM-1686
Manufacturer: TRUMPF
Type: TRUMATIC L 4050
Year: 2004
Working area: 4000 x 2000 x 115 mm
Laser rated output: 6000 Watt
Control: Basis Sinumerik 840 D
Working hour: 50232 / 25445 h
Max. Sheet thick./St: 25 mm
Max. Sheet thick./VA: 25 mm
Max. Sheet thick./AI: 15 mm
Max. Speed: 200 / 300 m/min
Positioning accuracy: 0,01 mm
Length: 13000 mm
Width: 5400 mm
Height: 2400 mm
Weight: 14000 kg

\n \n \n

Standard configuration

\n \n \n \n
    \n
  • Closed machine frame with integrated laser unit
  • \n
  • Laser unit: CO2 Laser TLF 6000 Watt, radio-frequency excited, chiller, logbook function
  • \n
  • Automatic pallet changer with longitudinal conveyer for small parts / slag
  • \n
  • Drives: Gantry drive in combination with linear direct drives
  • \n
  • Laser cutting head 7,5 lens
  • \n
  • Laser cutting head quick change device
  • \n
  • Laser power control
  • \n
  • HI-Las high pressure cutting
  • \n
  • PMS Plasma Monitoring System
  • \n
  • DIAS
  • \n
  • Automatic sheet edge detection
  • \n
  • PCS Process Control System
  • \n
  • Programmable power cycles
  • \n
  • High-speed processing with SprintLas
  • \n
  • ContourLas for producing small holes
  • \n
  • Automatic focus setting AutoLas Plus
  • \n
  • Laser power control
  • \n
  • Positioning laser diode
  • \n
  • Programmable cutting gas pressure setting
  • \n
  • Microweld
  • \n
  • Oil spray device for reliable thick plate machining
  • \n
  • Automatic shutdown
  • \n
  • Working area lighting
  • \n
  • Sinumerik 840 D control: Open PC-based control system, easy to operate, online help, diagnostic functions, maintenance logbook, technology data, teleservice, network connection RJ45, 3,5 drive
  • \n
  • Shopfloor programming ToPs 100 lite
  • \n
  • Safety: Multi-beam light barriers, completely encapsulated and ventilated beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin
  • \n
\n \n \n

Additional Equipment

\n \n

\n
    \n
  • Transverse conveyor with tilt container
  • \n
\n \n \nAutomation \n \n \n
    \n
  • Preparation LoadMaster
  • \n
\n
2004
Price  
  DE   request
125242352 101

HWACHEON Vesta 1000 10K for sale


CNC control FANUC 0i-MD Procedures x axis 1000 mm Y-axis 550 mm Z-axis 500 mm --------------------------------------------------------------------- Work table 1100 x 500 mm maximum work-piece weight of 700 kg - ...
used machine
 
CNC control FANUC 0i-MD

Procedures
x axis 1000 mm
Y-axis 550 mm
Z-axis 500 mm
---------------------------------------------------------------------
Work table 1100 x 500 mm
maximum work-piece weight of 700 kg
---------------------------------------------------------------------
Spindle speeds up to 10,000 1/min
Power 15/11 KW
BT 40 tool holder
---------------------------------------------------------------------
Rapid traverse x/y/z 36/36/30 m / min
Feed range 1-24.000 mm / min
---------------------------------------------------------------------
Tool magazine 24 x
Max tool diameter 80/150 mm
maximum tool length 300 mm
maximum tool weight 8 kg
---------------------------------------------------------------------
Machine surface Lxwxh 3,270 x 2.180 x 2.670 mm
Machine weight approx. 6,500 kg
---------------------------------------------------------------------
-Conveyors
-Cooling plant
-Internal coolant through the spindle
-Signal lamp
-Spindle chiller
-Hwacheon effecient Contur control system
-Hwacheon tool load detect system
-Hwacheon Al Nano contour
-Cutting feed optimization system
-Manual Guide i
-Transformers (30kVA)
2011
Price  
    request
125504828 109

TRUMPF TRUMATIC L 3030 for sale


Technical Data item number: LM-1676 Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year: 2001 Working area: 3000 x 1500 x 115 mm Laser rated output: 4000 Watt Control: Siemens Sinumerik 840 D Working hour: 5 ...
used machine
 

Technical Data

item number: LM-1676
Manufacturer: TRUMPF
Type: TRUMATIC L 3030
Year: 2001
Working area: 3000 x 1500 x 115 mm
Laser rated output: 4000 Watt
Control: Siemens Sinumerik 840 D
Working hour: 53.851 h / 25.191 h
Max. Sheet thick./St: 20 mm
Max. Sheet thick./VA: 15 mm
Max. Sheet thick./AI: 10 mm
Max. Speed: 60/85 m/min
Positioning accuracy: +/- 0,1 mm
Length: 9300 mm
Width: 4600 mm
Height: 2000 mm
Weight: 11500 kg

\n \n \n \nStandard Configuration: \n \n \n
    \n
  • Closed machine frame with integrated laser unit
  • \n
  • Laser unit: CO2 laser TLF 4000 (new in 2018 including 12 months warranty by manufacturer), radio-frequency excited, reflector telescope, chiller
  • \n
  • Automatic pallet changer and longitudinal conveyor
  • \n
  • Drives: Maintenance-free 3-phase servo motors
  • \n
  • Working area light
  • \n
  • Automatic shut down
  • \n
  • Cutting head with 5 lens and additional cutting head with 7,5 lens
  • \n
  • Quick changing device for cutting head
  • \n
  • Lubrification spray device for a safe thick sheet machining
  • \n
  • Logbook function
  • \n
  • Automatic sheet edge detection
  • \n
  • DIAS III
  • \n
  • Cutting gas pressure setting programmable
  • \n
  • Programmable power cycles
  • \n
  • HI-LAS high pressure cutting
  • \n
  • Plasma sensor system PMS
  • \n
  • Fast processing with SprintLas
  • \n
  • ContourLas for producing small holes
  • \n
  • Microweld
  • \n
  • Control: open PC-based control system, easy to use, online help, diagnostic functions,
  • \n
\n maintenance logbook, technology data, tele service, 3.5 disk drive, BNC-/RJ45 connection\n \n
    \n
  • MDE Interface
  • \n
  • Shopfloor programming ToPs 100 lite
  • \n
  • Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system,
  • \n
\n multi-chamber extractionsystem and compact dust extractor, safety cabin\n \nAddidional equipment \n \n\n
    \n
  • Transverse conveyor with container
  • \n
\n \n \n Automation \n \n \n
    \n
  • LiftMaster R
  • \n
\n \n \n \n
2001
Price  
  DE   request
125164672 708

CLIMAVENETA SRAT for sale
Chillers


A very good chiller Cooling capacity: 393 kW Year of manufacture: 2002 Number of compressors: 2 pcs Bitzer(screw) Freon: R407C Fans: 8 pcs Dimensions: 5,65 ? 2,25 ? 2,15 m Weight: 3345 kg This chiller is in a go ...
used machine
 
A very good chiller
Cooling capacity: 393 kW
Year of manufacture: 2002
Number of compressors: 2 pcs Bitzer(screw)
Freon: R407C
Fans: 8 pcs
Dimensions: 5,65 ? 2,25 ? 2,15 m
Weight: 3345 kg
This chiller is in a good condition

Do not hesitate to contact us
2002
Price  
  PL   request
125504832 109

TRUMPF TruLaser 3030 (L20) for sale


Technical Data item number: LM-1683 Manufacturer: TRUMPF Type: TruLaser 3030 (L20) Year: 2010 Working area: 3000 x 1500 mm x 115 mm Laser rated output: 4000 Watt Control: Siemens Sinumerik 840 D Working  ...
used machine
 

Technical Data

item number: LM-1683
Manufacturer: TRUMPF
Type: TruLaser 3030 (L20)
Year: 2010
Working area: 3000 x 1500 mm x 115 mm
Laser rated output: 4000 Watt
Control: Siemens Sinumerik 840 D
Working hour: 17.605 h/6.754 h
Max. Sheet thick./St: 20 mm
Max. Sheet thick./VA: 15 mm
Max. Sheet thick./AI: 10 mm
Max. Speed: simultan 140m/min
Positioning accuracy: +/- 0,10 mm
Length: 9300 mm
Width: 7600 mm
Height: 2200 mm
Weight: 12000 kg

\n \n \n \nStandard configuration \n · Closed machine frame with integrated laser unit\n· Motion unit for high precision processing\n· Torque drive combination with direct linear drives\n· Enclosed beam delivery system\n· One cutting head strategy\n· Chiller\n· Automatic pallet changer \n· Wide longitudinal conveyor\n· Ergonomic control panel with touchscreen\n· Work area lighting\n· Positioning laser diode\n· Spray device\n· PierceLine\n· NitroLine\n· PlasmaLine\n· Workshop programming\n \n Trumpf Laser \n · CO2 laser TruFlow 4000 \n· Maintenance-free radial turbine blower\n· Radio-frequency excitation\n· Laser control TASC 3\n· Laser power control\n· Laser logbook function\n \nCutting head \n · Laser cutting head with 250 mm lens\n· One cutting head strategy\n· Universal quick change device UTI \n· FocusLine\n· FlyLine\n· LensLine \n· ControlLine\n \nControl \n · Steuerung Sinumerik 840D SL\n· Technology data is integrated\n· Automatic shutdown\n· SprintLine\n· ContourLine\n· FastLine\n· Programmable cutting gas pressure\n· Teleservice\n· Diagnostic functions\n· Online help\n \n Data transmission \n · USB interface\n· RJ-45 network connection\n \n \nSicherheit \n · CE label\n· Light barriers\n· Laser monitoring system\n· Multi chamber extraction system and compact dust extractor\n· Machine enclosure\n \nAdditional configuration \n · Additional laser cutting head with 130 mm lens\n
2010
Price  
  DE   request
125164618 708

CARRIER 30GX for sale
Chillers


A very good chiller Cooling capacity: 745 kW Year of manufacture: 2004 Number of compressors: 3 pcs Carlyle (screw) Freon: R134A Fans: 10 pcs Dimensions: 6 x 2,3 x 2,3 m Weight: 6477 kg This chiller is in a good ...
used machine
 
A very good chiller
Cooling capacity: 745 kW
Year of manufacture: 2004
Number of compressors: 3 pcs Carlyle (screw)
Freon: R134A
Fans: 10 pcs
Dimensions: 6 x 2,3 x 2,3 m
Weight: 6477 kg
This chiller is in a good condition

Do not hesitate to contact us
2004
Price  
  PL   request
125504834 109

TRUMPF TRUMATIC L 3030 for sale


Technical Data item number: LM-1682 Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year: 2004 Working area: 3000 x 1500 x 115 mm Laser rated output: 2000 Watt Control: Siemens Sinumerik 840 D Working hour: 8 ...
used machine
 

Technical Data

item number: LM-1682
Manufacturer: TRUMPF
Type: TRUMATIC L 3030
Year: 2004
Working area: 3000 x 1500 x 115 mm
Laser rated output: 2000 Watt
Control: Siemens Sinumerik 840 D
Working hour: 88.909 h
Max. Sheet thick./St: 12 mm
Max. Sheet thick./VA: 4 mm
Max. Sheet thick./AI: 3 mm
Max. Speed: 60/85 m/min
Positioning accuracy: +/- 0,1 mm
Length: 9300 mm
Width: 4600 mm
Height: 2000 mm
Weight: 11500 kg

Standard configuration

\n \n\n
    \n
  • Closed machine frame with integrated laser unit
  • \n
  • Laser unit: CO2 Laser TLF 2000 Watt, radio-frequency excited, chiller, logbook function
  • \n
  • Automatic pallet changer with longitudinal conveyer for small parts / slag
  • \n
  • Drives: Maintenance-free 3-phase servo motors
  • \n
  • HI-LAS high pressure cutting
  • \n
  • Plasma sensor system PSS
  • \n
  • High-speed processing with SprintLas
  • \n
  • ContourLas for producing small holes
  • \n
  • Programmable cutting gas pressure setting
  • \n
  • Laser cutting head with 5 lens and laser cutting head with 7.5 lens
  • \n
  • Positioning laser diode
  • \n
  • Cutting head quick-change device
  • \n
  • Automatic focus setting AutoLas Plus
  • \n
  • APC Advanced Process Control
  • \n
  • Automatic sheet edge detection
  • \n
  • Microweld
  • \n
  • Programmable power cycles
  • \n
  • Oil spray device for reliable thick plate machining
  • \n
  • Laser power control
  • \n
  • Automatic shutdown
  • \n
  • Work area lighting
  • \n
  • Sinumerik 840D control: Open PC-based control system, easy to use, Online help, diagnostic functions, maintenance logbook, technology data, Teleservice, 3.5 disk drive, BNC-/RJ45 connection
  • \n
  • Shopfloor programming ToPs 100 lite
  • \n
  • Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact dust extractor, machine enclosure consisting of Macrolon panels
  • \n
\n
2004
Price  
  DE   request
125164615 1200

YORK - GRAM, 2 UNITS cooling capacity 354 kW for sale
Chiller Cooling Stations YORK - GRAM


YORK 708 kW Chiller Cooling Stations Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped i ...
used machine
 
YORK 708 kW Chiller Cooling Stations

Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped in full operational condition in begining of year 2018

Both units include the following main equipment
• Cooling compressor York HC 8125A with cooling capacity 354 kW
• Plate Heat Excanger / Evaporator type M10
• Liquid separator GHEA
• Oil separator Sabroe
Techncial specifications of main equipment

Cooling compressors
Manufacturer: YORK – GRAM
Compressor type 2 units of HC8125A
Year 1999
Operating hours Approx 52000 / unit
Refrigerant type R717 (NH3)
Refrigerant capacity 30 kg / unit
Number of units 2
Electic motor 2 x 110 kW
Compressor speed 1 120 rpm
Power supply 3x400 V/3/50 Hz
Power steps 4 steps
Cooling Capacity 708 kW
Evaporation temperature -12C
Condensation temperature +36C
Secondary reagent Water / Glycol
Concentration 25-30%
Reagent incoming temp -2C
Reagent exit temp -8C


ALFA LAVAL plate heat exchanger for YORK station
Manufacturer: Alfa Laval
Manufacturer’s type: M10 – BWFDR
Manufacturing year: 1999
Capacity: 43,5 Liter
Pressure 25,00 bar
Operating temp. 20/120 C // - 10/70 C
Technical condition:

Liquid Separator
Manufacturer: GHEA
Manufacturer’s type: 0519R
Year 1999
Capacity 425 liter
Working Temp. Min -40/Max - 50C
Working pressure 28,6 bar

Oil Separator
Manufacturer SABROE Refrigerant.
Type OVUR 4107 D
Year: 2000
Operating pressure 26,00 Bar

1999
Price  
  FI   request
125504836 109

TRUMPF TruLaser 5030 classic for sale


Technical Data item number: LM-1669 Manufacturer: TRUMPF Type: TruLaser 5030 classic Year: 2007 Working area: 3000 x 1500 x 115 mm Laser rated output: 5000 Watt Control: Siemens Sinumerik 840 D Working h ...
used machine
 

Technical Data

item number: LM-1669
Manufacturer: TRUMPF
Type: TruLaser 5030 classic
Year: 2007
Working area: 3000 x 1500 x 115 mm
Laser rated output: 5000 Watt
Control: Siemens Sinumerik 840 D
Working hour: 43.942h/29.582h
Max. Sheet thick./St: 25 mm
Max. Sheet thick./VA: 20 mm
Max. Sheet thick./AI: 12 mm
Max. Speed: 200 / 300 m/min
Positioning accuracy: 0,1 mm
Length: 11100 mm
Width: 4600 mm
Height: 2350 mm
Weight: 14725 kg

Standard configuration

\n \nMachine \n \n
    \n
  • Closed machine frame with integrated laser unit
  • \n
  • Motion unit for high precision processing
  • \n
  • Automatic pallet changer
  • \n
  • Longitudinal conveyor
  • \n
  • Gantry drive in combination with direct linear drives
  • \n
  • Enclosed beam delivery system
  • \n
  • NitroLine
  • \n
  • FocusLine
  • \n
  • PlasmaLine
  • \n
  • SprintLine
  • \n
  • ContourLine
  • \n
  • Microweld
  • \n
  • Automatic nozzle cleaning
  • \n
  • Spray device
  • \n
  • Positioning laser diode
  • \n
  • Programmable cutting gas pressure
  • \n
  • Automatic shutdown
  • \n
  • Working area lighting
  • \n
  • TruToPs Laser Lite
  • \n
  • TFT colour screen
  • \n
\n \nTrumpf Laser \n \n
    \n
  • CO2 Laser TruFlow 5000
  • \n
  • Maintenance-free radial turbine blowers
  • \n
  • Radio-frequency excitation
  • \n
  • Laser control TASC 3
  • \n
  • Laser power control
  • \n
  • Logbook function Laser
  • \n
  • Chiller
  • \n
\n \nLaser cutting head \n \n
    \n
  • Laser cutting head with 5 and 7.5 lens for TruFlow 5000
  • \n
  • Cutting head quick-change device
  • \n
  • ControlLine
  • \n
  • PierceLine
  • \n
\n \nControl \n \n
    \n
  • Siemens Sinumerik 840D
  • \n
  • Easy to use
  • \n
  • Online help
  • \n
  • Integrated e-shop
  • \n
  • Diagnostic functions
  • \n
  • Technology data is integrated
  • \n
  • Teleservice
  • \n
\n \nSafety \n \n
    \n
  • CE label
  • \n
  • Light barriers
  • \n
  • Monitoring system
  • \n
  • Multi-chamber extraction system
  • \n
  • Compact dust extractor
  • \n
  • Machine enclosure consisting of Macrolon panels
  • \n
\n \nData transfer \n \n
    \n
  • RJ-45 network connection
  • \n
  • 3.5 disc drive
  • \n
\n \n \n

Additional equipment

\n \n\n
    \n
  • Laser cutting head with 3.75 lens
  • \n
  • Right hand installation machine
  • \n
\n \n \n \n \n
2007
Price  
  DE   request
125164610 1200

X 354 KW York HC 8125A for sale
Chiller Cooling Stations YORK - GRAM


YORK 2 x 354 kW Chiller Cooling Stations Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in be ...
used machine
 
YORK 2 x 354 kW Chiller Cooling Stations

Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in begining of year 2018

Both units include the following main equipment
• Cooling compressor York HC 8125A with cooling capacity 354 kW
• Plate Heat Excanger / Evaporator type M10
• Liquid separator GHEA
• Oil separator Sabroe

Techncial specifications of main equipment

Cooling compressors
Manufacturer: YORK – GRAM
Compressor type HC8125A
Year 1999
Operating hours Approx 42000
Refrigerant type R717 (NH3)
Refrigerant capacity 30 kg
Number of units 2
Electic motor 110 kW
Compressor speed 1 120 rpm
Power supply 3x400 V/3/50 Hz
Power steps 4 steps
Cooling Capacity 354 kW
Evaporation temperature -12C
Condensation temperature +36C
Secondary reagent Water / Glycol
Concentration 25-30%
Reagent incoming temp -2C
Reagent exit temp -8C


ALFA LAVAL plate heat exchanger for YORK station
Manufacturer: Alfa Laval
Manufacturer’s type: M10 – BWFDR
Manufacturing year: 1999
Capacity: 43,5 Liter
Air Pressure 25,00 bar
Operating temp. 20/120 C // - 10/70 C
Technical condition:

Liquid Separator
Manufacturer: GHEA
Manufacturer’s type: 0519R
Year 1999
Capacity 425 liter
Working Temp. Min -40/Max - 50C
Working pressure 28,6 bar

Oil Separator
Manufacturer SABROE Refrigerant.
Type OVUR 4107 D
Year: 2000
Operating pressure 26,00 Bar

1999
Price  
  FI   request
125504838 109

TRUMPF TruLaser 3040 for sale


Technical Data item number: LM-1685 Manufacturer: TRUMPF Type: TruLaser 3040 Year: 2008 Working area: 4000 x 2000 x 115 mm Laser rated output: 3200 Watt Control: Siemens Sinumerik 840 D Working hour: 45. ...
used machine
 

Technical Data

item number: LM-1685
Manufacturer: TRUMPF
Type: TruLaser 3040
Year: 2008
Working area: 4000 x 2000 x 115 mm
Laser rated output: 3200 Watt
Control: Siemens Sinumerik 840 D
Working hour: 45.561 h / 23.289 h
Max. Sheet thick./St: 20 mm
Max. Sheet thick./VA: 12 mm
Max. Sheet thick./AI: 8 mm
Max. Speed: 60/85 m/min
Positioning accuracy: +/- 0,1 mm
Length: 11600 mm
Width: 5200 mm
Height: 2000 mm
Weight: 16000 kg

\n \n \nStandard Configuration \n \n\n
    \n
  • Closed machine frame with integrated laser unit
  • \n
  • Laser unit: CO2 laser TruFlow 3200 Watt, radio-frequency excited, mirror telescope, chiller, logbook function
  • \n
  • Automatic pallet changer
  • \n
  • Longitudinal conveyor for small parts/slag
  • \n
  • Drives with maintenance-free servo motors
  • \n
  • Laser cutting head with 5 lens
  • \n
  • Laser cutting head with 7,5 lens
  • \n
  • Programmable cutting gas pressure setting
  • \n
  • ControlLine: Maintains a constant stand-off between the nozzle and the workpiece during the cutting operation
  • \n
  • FocusLine: Program-controlled focus adjustment to different material types and thicknesses
  • \n
  • Laser power control
  • \n
  • Positioning laser diode
  • \n
  • NitroLine: High-pressure cutting
  • \n
  • SprintLine: High-speed processing
  • \n
  • ContourLine: For producing small holes
  • \n
  • PlasmaLine
  • \n
  • Automatic sheet edge detection
  • \n
  • Programmable power cycles
  • \n
  • Microweld
  • \n
  • Spray device for reliable thick plate machining
  • \n
  • Automatic shutdown
  • \n
  • Working area lighting
  • \n
  • Sinumerik 840D control: Open PC-based control system, easy to use
  • \n
\nOnline help, diagnostic functions, maintenance logbook, technology data, teleservice \n\n
    \n
  • Shopfloor programming
  • \n
  • Safety: Multi-beam light barriers, completely encapsulated and purged beam delivery, monitoring system, multi-chamber extraction system and compact
  • \n
\n dust extractor, safety cabin \n\n
    \n
  • Network connection RJ45, 3.5 disk drive, TFT color screen
  • \n
\n \n Additional Configuration \n \n \n
    \n
  • PierceLine
  • \n
\n \n \n
2008
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

PRESSA PER PRESSOFUSIONE MAICO


BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Heidelberg SORS


Heidelberg SORS Year: 1978 Serial: 511421 Size: 70x100 cm Semi Alcohol Dampening (Converted from Water Dampening) Chiller Excellent Condition Still in production Available immediately

PRESSA PER PRESSOFUSIONE MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 Press for aluminium Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage for more information contact us at + 39 030 725026 machinery and vision Monday through Friday from hours 8:30 at 13:00 and 14:00 at 19:00

PRESSA MAICO


PRESSES FOR DIE CASTING MAICO BRAND Maico Tek MODEL 380 F YEAR 1994 DESCRIPTION-aluminium die casting Includes: die-cast rotors exhaust arm jrobi; control cabinet; Rotary magazine and Lubricator Jrobi; Proportional pressure flow; opening and closing; second stage motorised; with pressure reducer; CE marked Chiller IECI PF/300 GAS Proportional pressure flow; The proportional opening and closing; Second stage motorised; With pressure reducer on stage For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Chillers Climaveneta SRAT


A very good chiller Cooling capacity: 393 kW Year of manufacture: 2002 Number of compressors: 2 pcs Bitzer(screw) Freon: R407C Fans: 8 pcs Dimensions: 5,65 ? 2,25 ? 2,15 m Weight: 3345 kg This chiller is in a good condition Do not hesitate to contact us

Chillers Carrier 30GX


A very good chiller Cooling capacity: 745 kW Year of manufacture: 2004 Number of compressors: 3 pcs Carlyle (screw) Freon: R134A Fans: 10 pcs Dimensions: 6 x 2,3 x 2,3 m Weight: 6477 kg This chiller is in a good condition Do not hesitate to contact us

Chiller Cooling Stations YORK - GRAM York - Gram, 2 units cooling capacity 354 kW


YORK 708 kW Chiller Cooling Stations Liguid cooling compressor package which includes two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. This station was stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe Techncial specifications of main equipment Cooling compressors Manufacturer: YORK – GRAM Compressor type 2 units of HC8125A Year 1999 Operating hours Approx 52000 / unit Refrigerant type R717 (NH3) Refrigerant capacity 30 kg / unit Number of units 2 Electic motor 2 x 110 kW Compressor speed 1 120 rpm Power supply 3x400 V/3/50 Hz Power steps 4 steps Cooling Capacity 708 kW Evaporation temperature -12C Condensation temperature +36C Secondary reagent Water / Glycol Concentration 25-30% Reagent incoming temp -2C Reagent exit temp -8C ALFA LAVAL plate heat exchanger for YORK station Manufacturer: Alfa Laval Manufacturer’s type: M10 – BWFDR Manufacturing year: 1999 Capacity: 43,5 Liter Pressure 25,00 bar Operating temp. 20/120 C // - 10/70 C Technical condition: Liquid Separator Manufacturer: GHEA Manufacturer’s type: 0519R Year 1999 Capacity 425 liter Working Temp. Min -40/Max - 50C Working pressure 28,6 bar Oil Separator Manufacturer SABROE Refrigerant. Type OVUR 4107 D Year: 2000 Operating pressure 26,00 Bar

Chiller Cooling Stations YORK - GRAM x 354 kW York HC 8125A


YORK 2 x 354 kW Chiller Cooling Stations Station has two idential units of York cooling compressors with all auxilliaries, electrical and control cabinets. Both units were stopped in full operational condition in begining of year 2018 Both units include the following main equipment • Cooling compressor York HC 8125A with cooling capacity 354 kW • Plate Heat Excanger / Evaporator type M10 • Liquid separator GHEA • Oil separator Sabroe

KBA RAPIDA 72-5


-Five colours straight machine max size 52x72 cms. -Year 1996, 48 mil. impressions -KBA Colortronic table control with ink and plate registers -Alcool dampening with chiller -Quick action plate clamps -High pile delivery -IR dryer, Manual prese ...

Shinohara 75-4+L


ref. 416 Shinohara 75-4+L format 52x74 cm, 4 colour + lack tower, year 2005, 62 mio. imp. CIP3, ink and register remote control from separate console, alcohol dampening, Baldwin chiller, Baldwin IVT IR dryer, Harris & Bruno coater, double size of cylind ...

Ammonia Liquid Chiller GEA Grasso VP 1300 GEA Grasso GmbH VP 1300


Ammonia Liquid Chiller GEA Grasso VP 1300 CAPACITY CONTROL All screw compressors used in the package series are fitted with a continuous capacity control with a range of 10 - 100%. The capacity is adjusted by shortening the compressor stroke. The  ...

Refrigeration Screw Compressor SAB 128 HF York Sabroe, Denmark DuoPack SAB 128 HF - 750 kW


Refrigeration Screw Compressor DuoPack SAB 128 HF - 750 kW This is a chiller package made by Sabroe Denmark in 2002, cooling capacity 750 kW, adjustable for 10-100% load. The package consist of two separate liquid cooling screw compressors type SAB 128 ...

Absorption Chiller, Two Stage Century 600 USRT Type AR-W-600 G2


Two Stage Steam Absorption Chiller Century 3 x 600 US Refrigeration Tons This in one chiller plant with 3 identical two stage steam absorption chillers made by Finetec Century in year 2005. Total cooling capacity of this plant is 1800 USRT or 6.33 MW a ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Air Cooled Chiller Plant CIAT LDM 540V R410A


Cooling output: 47kW, max. temperature: 50°C, weight: 1.483t.

Chillers Trane RTAC


A very nice chillers Cooling capacity: 450 kW Year of manufacture: 2003 Number of compressors: 2 pcs Trane (screw) Fans: 9 pcs Dimensions: 5,1 x 2,3 x 2,41 m Weight: 4400 kg At the moment we have two such chillers and they are in good condition  ...

Water chiller TRANE CGAM 120


TRANE CGAM 120 Product number: M17-4267 Cooling capacity: 327 kW Number of fans: 6 Refrigerant: R410A Refrigerant content: 33.6 33.6 kg + Rated voltage: 400 Volt Power consumption: 110.6 kW Dimensions: 3647x2273x2344 mm Weight: 2615 kg Year buil ...

Water chiller TRANE CGAM 120


TRANE CGAM 120 Product number: M17-4267 Cooling capacity: 327 kW Number of fans: 6 Refrigerant: R410A Refrigerant content: 33.6 33.6 kg + Rated voltage: 400 Volt Power consumption: 110.6 kW Dimensions: 3647x2273x2344 mm Weight: 2615 kg Year bu ...

Heidelberg XL 75-5P3-LX


Alcolor Vario with Technotrans beta C, autoplate, Prinect Press Center with Axis control, Ink temperature control, watercooled including pump station Technotrans beta.ps, and chiller, Heidelberg Drystar IR dryer, Heidelberg Airstar, extended delivery X ...

Man Roland Rekord RZK 3B E


Man Roland Rekord RZK 3B Year: 1992 Serial: 22787 RCI II Remote Control 1+1 / 2-0 Perfector Epic Delta Alcohol Dampening Royce Recirculation Chiller Ready in stock Cleaned and Checked Available immediately

Chillers YORK LAG


CHILLERS YORK YEAR 2011

Chillers Schmidt Sigma 37H37


Schmidt Sigma plate heat exchanger type sigma 37H37

Chillers Schmidt KG Sigma 17-37


SCHMIDT sigma 17-37 plate heat exchanger year 1983

Ammonia Liquid Chiller GEA Grasso VP 1300 GEA Grasso GmbH VP 1300


Ammonia Liquid Chiller GEA Grasso VP 1300 CAPACITY CONTROL All screw compressors used in the package series are fitted with a continuous capacity control with a range of 10 - 100%. The capacity is adjusted by shortening the compressor stroke. The  ...

Refrigeration Screw Compressor SAB 128 HF York Sabroe, Denmark DuoPack SAB 128 HF - 750 kW


Refrigeration Screw Compressor DuoPack SAB 128 HF - 750 kW This is a chiller package made by Sabroe Denmark in 2002, cooling capacity 750 kW, adjustable for 10-100% load. The package consist of two separate liquid cooling screw compressors type SAB 128 ...

Absorption Chiller, Two Stage Century 600 USRT Type AR-W-600 G2


Two Stage Steam Absorption Chiller Century 3 x 600 US Refrigeration Tons This in one chiller plant with 3 identical two stage steam absorption chillers made by Finetec Century in year 2005. Total cooling capacity of this plant is 1800 USRT or 6.33 MW a ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Chillers Riedel PC14


Cooling capacity: 85 kW. Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Freon: R134A Compressors: 4 pcs. Danfoss (scroll) Number of fans: 4 pcs. Water pumps: 2 pcs. Dimensions: 3,7 x 1,3 x 2,1 m Weight: 1500 kg In stock: 3 pieces

Chillers Riedel PC


Cooling capacity: 80 kW. Year of manufacture: 2015 Refrigerant circuit: 2 pieces Freon: R407C Compressors: 4 pcs. Danfoss (scroll) Number of fans: 4 pcs. Water pumps: 2 pcs. Dimensions: 3,7 x 1,3 x 2,1 m Weight: 1470 kg In stock: 2 pcs

Ammonia Liquid Chiller GEA Grasso VP 1300 GEA Grasso GmbH VP 1300


Ammonia Liquid Chiller GEA Grasso VP 1300 CAPACITY CONTROL All screw compressors used in the package series are fitted with a continuous capacity control with a range of 10 - 100%. The capacity is adjusted by shortening the compressor stroke. The  ...

Refrigeration Screw Compressor SAB 128 HF York Sabroe, Denmark DuoPack SAB 128 HF - 750 kW


Refrigeration Screw Compressor DuoPack SAB 128 HF - 750 kW This is a chiller package made by Sabroe Denmark in 2002, cooling capacity 750 kW, adjustable for 10-100% load. The package consist of two separate liquid cooling screw compressors type SAB 128 ...

Absorption Chiller, Two Stage Century 600 USRT Type AR-W-600 G2


Two Stage Steam Absorption Chiller Century 3 x 600 US Refrigeration Tons This in one chiller plant with 3 identical two stage steam absorption chillers made by Finetec Century in year 2005. Total cooling capacity of this plant is 1800 USRT or 6.33 MW a ...

Liquid Chiller GEA Grasso FX 2800 / S - 2.800 kW GEA Grasso GmbH Grasso FX VP 2800 / S - R717


Liquid Chiller GEA Grasso FX 2800 / s - 2 x 2800 kW Two GEA Grasso FX PV 2800 S - screw type liquid chiller compressors were installed in 2003 (made in 2002) and they still installed and in very good working condition. The compressors have flooded evap ...

Chillers York YLAE


Cooling capacity: 170 kW Year of manufacture: 2006 Refrigerant circuit: 2 pieces Freon: R410A Compressors: 4 pcs. Copeland (scroll) Number of fans: 4 pcs. Dimensions: 2,5 ? 2,25 ? 2,2 m Weight: 2000 kg One compressor is broken, but we have a repla ...

Chillers CLIMAVENETA FOCS-CA/r/B 2702


for sale 1 chillers and 5 aero table loaded on truck from paris

Chillers CARRIER 30RA-040-A0067-PEE


FOR SALE 3 PICES CARRIER YEAR 2002 FLUIDE 407 C PRICE FOR 3 6000€ LOADING ON TRUCK

Polly 266A-PH


Printing machine - Two Colour Polly Model 266A-PH Year 1998 Impressions 45 million Minimum sheet size 330 x 330 mm Maximum sheet size 482 x 660 mm Dampening Molleton Water dampening cooled by a Technotrans chiller replaced in 2009 Perfecting 2-0 / ...

BROAD BZ651XD-33


absorption chiller BROAD type BZ651XD-33 / 27-6 / 11-has a cold rated power of 750 kW and a gas consumption ranging from 460 to 814 kW depending on the load.

Chillers CLIMAVENETA FOCS-WATER 2602


complete installation 3 pices year 2006

carrier 30RB 522


Hello, Soon we will have available 5 x CHILLERS for sale. BRAND: CARRIER 2 x CHILLERS TYPE : 30RB 522 KW : 506 YEAR : 2007 REFRIGERANT GAS : R 410 A PRICE 14 000€ PIECES LOADED ON TRUCK Sale & Purchase Used Generators Diesel and  ...

Chillers VRT VLA 300H


VRT CUSTARD 300 h Product number: M18-4288 Cooling capacity: 295 kW Number of fans: 5 Refrigerant: R410A Refrigerant content: 28.1 + 24.5 kg Rated voltage: 400 Volt Power consumption: 101 kW Dimensions: 2507 x 3614 x 2254 mm Weight: 2170 kg Co ...

Chillers VRT VLA 195H


VRT CUSTARD 195H Product number: M18-4287 Cooling capacity: 198 kW Number of fans: 4 Refrigerant: R410A Refrigerant content: 24 + 16.8 kg Rated voltage: 400 Volt Consumed power: 64 kW Dimensions: 2507 x 2911 x 2254 mm Weight: 1706 kg Construct ...

Chillers VRT VLA 441H


VRT CUSTARD 441H Product number: M18-4286 Cooling capacity: 426 kW Number of fans: 7 Refrigerant: R410A Refrigerant content: 37.6 + 28.1 kg Rated voltage: 400 Volt Power consumption: 142 kW Dimensions: 2507 x 4769 x 2254 mm Weight: 3343 kg Con ...

Chillers VRT VLA 516H


VRT CUSTARD 516H Product number: Cooling capacity: 519 kW Number of fans: 8 Refrigerant: R410A Refrigerant content: 39.5 + 39 kg Rated voltage: 400 Volt Power consumption: 172 kW Dimensions: 2507 x 4769 x 2254 mm Weight: 3481 kg Construction y ...

Chillers VRT VLA 180S


VRT CUSTARD 180S Product number: M18-4283 Cooling power: 190 kW Number of fans: 4 Refrigerant: R410A Refrigerant content: 21.3 + 15.4 kg Rated voltage: 400 Volt Power consumption: 63 kW Size: 2911 x 2242 x 2508 mm Weight: 1681 kg Construction  ...

Chillers VRT VLA 286S


VRT CUSTARD 286S Product number: M18-4282 Cooling capacity: 272 kW Number of fans: 4 Refrigerant: R410A Refrigerant content: 25.9 + 24 kg Rated voltage: 400 Volt Power consumption: 104 kW Size: 2911 x 2242 x 2508 mm Weight: 1853 kg Constructio ...

Chillers VRT VLA 221H


VRT CUSTARD 221H Product number: M18-4281 Cooling capacity: 212 kW Number of fans: 4 Refrigerant: R410A Refrigerant content: 24.5 + 22.7 kg Rated voltage: 400 Volt Power consumption: 66 kW Dimensions: 2507 x 2911 x 2254 mm Weight: 1721 kg Cons ...

Chillers VRT VLA 456H


VRT CUSTARD 456H Product number: M18-4280 Cooling capacity: 455 kW Number of fans: 8 Refrigerant: R410A Refrigerant content: 36.7 + 35.4 kg Rated voltage: 400 Volt Power consumption: 149 kW Dimensions: 2507 x 4769 x 2254 mm Weight: 3481 kg Con ...

Chillers VRT VLA 390H


VRT CUSTARD 390H Product number: M18-4279 Cooling power: 380 kW Number of fans: 6 Refrigerant: R410A Refrigerant content: 32.7 + 27.7 kg Rated voltage: 400 Volt Power consumption: 128 kW Dimensions: 2507 x 3614 x 2254 mm Weight: 2508 kg Constr ...

CHILLER SYSTEM AERMEC 2 MOTOR


N. 01 CHILLER 2 MOTOR 104,34 MC/H YEAR 1998 N. 01 CHILLER 2 MOTOR 126,09 MC/H YEAR 1998 MOTOR BRAND DWM COPELAND
Get the latest machine offers by email: order newsletter